CSA C22.2 No. 60320-1 : 2011 : R2016
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS
Hardcopy , PDF
28-07-2021
English
01-01-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
PREFACE
NATIONAL DIFFERENCES
FOREWORD
1 Scope
2 Normative references
3 Definitions
4 General requirements
5 General notes on tests
6 Standard ratings
7 Classification
8 Marking
9 Dimensions and compatibility
10 Protection against electric shock
11 Provision for earthing
12 Terminals and terminations
13 Construction
14 Moisture resistance
15 Insulation resistance and electric strength
16 Forces necessary to insert and to withdraw the connector
17 Operation of contacts
18 Resistance to heating of appliance couplers for hot
conditions or very hot conditions
19 Breaking capacity
20 Normal operation
21 Temperature rise
22 Cords and their connection
23 Mechanical strength
24 Resistance to heat and ageing
25 Screws, current-carrying parts and connections
26 Creepage distances, clearances and distances through
insulation
27 Resistance of insulating material to heat, fire and
tracking
28 Resistance to rusting
29 Electromagnetic compatibility (EMC) requirements
Annex A (normative) - Routine tests for factory wired
appliance couplers related to safety
(protection against electric shock and
correct polarity)
Annex DVA (informative) - Configurations for North
American Ratings Table in Clause 6.2DV
Annex DVB (informative) - Referenced standards that
are informative
Pertains to two-pole appliance couplers for a.c. only, with or without earthing contact, with a rated voltage not exceeding 250 V and a rated current not exceeding 16 A, for household and similar general purposes and intended for the connection of a supply cord to electrical appliances or other electrical equipment for 50 Hz or 60 Hz supply.
| DevelopmentNote |
Also numbered as UL 60320-1. (06/2011)
|
| DocumentType |
Standard
|
| Pages |
148
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Withdrawn
|
| SupersededBy |
| IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
| CSA C22.2 No. 49 : 2014 | FLEXIBLE CORDS AND CABLES |
| UL 1863:4ED 2004-05-14 | Standard for Communications-Circuit Accessories |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| IEC TR 60083:2015 | Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC |
| CSA C22.2 No. 21 : 2014 | CORD SETS AND POWER-SUPPLY CORDS |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
| UL 1682:5ED 2017-02-15 | Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type |
| IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
| CSA C22.2 No. 65 : 2013 | WIRE CONNECTORS |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| ISO 2093:1986 | Electroplated coatings of tin — Specification and test methods |
| CSA C22.2 No. 182.3 : 2016 | SPECIAL USE ATTACHMENT PLUGS, RECEPTACLES, AND CONNECTORS |
| UL 746A:6ED 2012-09-06 | Polymeric Materials - Short Term Property Evaluations |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| C22.2 NO. 182.1-17 | Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682) |
| IEC 60695-2-10:2013 | Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.