CSA C22.2 No. 145 : 2011 : INC : UPD 1 : 2017 : R201500
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ELECTRIC MOTORS AND GENERATORS FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS
Hardcopy , PDF
13-11-2020
English
01-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Preface
1 Scope
2 Conditions for Use
3 Normative References
4 Dated and Undated References
5 Definitions
6 Components
7 Units of Measurement
8 Terminology
9 Zone and Group Equivalency
10 Enclosures
11 Joints in Enclosure
12 Holes in Enclosure
13 Shaft Openings
14 Drain and Breather Plugs in Enclosure
15 Air-Gap Gauge Plugs in Enclosure
16 Devices with Operating Rods or Spindles
17 Protection Against Corrosion
18 Materials Applied to Joint Surfaces
19 Field-Wiring Connections
20 Cord-Connected Motors
21 Assemblies of Equipment
22 External Fans and Fan Guards
23 Gasoline Submersible Motors
24 Leakage Detectors
25 Maximum External Surface Temperatures
26 Devices for Limiting External Surfaces Temperatures
27 Spacings
28 Test Voltages and Test Conditions
29 Instrumentation - Temperature Measurements
30 Variable-Frequency Inverter-Drive Motors
31 Temperature Tests - General
32 Temperature Tests on Sinewave Power for Single
Speed or Multi-Speed Motors
33 Temperature Tests for Variable-Frequency Inverter-Drive
Motors
34 Dielectric-Voltage Withstand Test
35 Dust-Penetration Test
36 Explosion Test
37 Over Pressure Test on Enclosures
38 Tests on Temperature-Limiting Devices for Limiting
External Surface Temperature
39 Secureness Test on Conduit Hubs
40 Electrical-Resistance Test
41 Accelerated-Aging Test on Bushings
42 Cord-Pull Test
43 Rough-Usage Test
44 Drop Test
45 Gasoline-Leakage Test
46 Non-Metallic Fans and Fan Guards Test
47 Pull Test on Tubes
48 Sealing Compounds Test
49 Low Ambient-Duty Motors
50 Grounding-Continuity Test
51 Markings
Annex A (normative) - Standard References
Annex B (informative) - Standards for components
Annex C (normative) - Construction for Waiver of
Explosion Tests
Pertains to electric motors and generators or submersible and nonsubmersible sewage pumps and systems suitable for use in Class I, Division 1, Groups B, C and D, and Class II, Division 1, Groups E, F and G, hazardous (classified) locations as defined by the Canadian Electrical Code, C22.1 Part I (CEC), and the National Electrical Code, ANSI/NFPA 70 (NEC).
| DevelopmentNote |
Also numbered as UL 674 & NMX-J-652-ANCE. (06/2011)
|
| DocumentType |
Standard
|
| Pages |
119
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| CSA C22.2 No. 25 : 1966 | ENCLOSURES FOR USE IN CLASS 2, DIVISION 1, GROUPS E, F, AND G HAZARDOUS LOCATIONS |
| UL 1004-8:2ED 2013-11-13 | Inverter Duty Motors |
| CSA C22.2 No. 77 : 2014 | MOTORS WITH INHERENT OVERHEATING PROTECTION |
| ASTM E 155 : 2015 : REDLINE | Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| ASTM E 11 : 2017 : REDLINE | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| CSA C22.2 No. 100 : 2014 | MOTORS AND GENERATORS |
| UL 1004-2:2ED 2014-01-10 | Impedance Protected Motors |
| UL 1004-6:2ED 2012-06-06 | Servo and Stepper Motors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.