CSA B51S1 : 2005
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SUPPLEMENT NO. 1 TO B51-03, BOILER, PRESSURE VESSEL, AND PRESSURE PIPING CODE
01-01-2009
12-01-2013
Technical Committee on Boilers and Pressure Vessels
Association of Chief Inspectors Subcommittee
Subcommittee on Boilers and Related Components
Subcommittee on Pressure Vessels
Editorial Subcommittee
Subcommittee on Parts 2 and 3 of CSA Standard B51
Preface
Foreword
B51-03, Part 1, Boilers, Pressure Vessels, and Pressure Piping
1 Scope
2 Reference Publications
3 Definitions
4 General Requirements
5 Identification
6 Boilers and Related Components
7 Pressure Vessels
8 Piping and Fittings
9 Refrigeration Equipment
10 Fired-Heater Pressure Coils in Petroleum and Chemical
Plant Service
11 Repairs and Alterations
Tables
Figures
Annexes
A (informative) - Burial of Pressure Vessels
B (informative) - Quality Control Program for Defect
Prevention and In-service Reliability
C (informative) - Guidelines for Safety Valve, Relief Valve,
and Safety-Relief Valve Repair Organizations
D (informative) - Sample Forms
E (informative) - Inspection of Welds in Pressure Coils
Exposed to Direct Radiant Heat
F (informative) - Quality Control Program for Manufacturers
of Fittings
G (normative) - Automotive Propane Vessel Standards
H (informative) - Overpressure Protection Devices
B51-03, Part 2, High-Pressure Cylinders for the On-board
Storage of Natural Gas and Hydrogen as Fuels for Automotive
Vehicles
0 Introduction
1 Scope
2 Reference Publications
3 Definitions
4 Service Conditions
5 Design Approval
6 Requirements Applicable to All Cylinder Types
7 Type 1 Metal Cylinder
8 Type 2 Hoop-Wrapped Cylinders
9 Type 3 Fully Wrapped Cylinders
10 Type 4 All-Composite Cylinders
11 Marking
12 Preparation for Dispatch
13 Quality Control
14 Test Methods
Tables
Annexes
A (informative) - Report Forms
B (informative) - Procedure for Requalifying All-Steel
Natural Gas Vehicle Storage Cylinders
B51-03, Part 3, Compressed Natural Gas and Hydrogen
Refuelling Station Pressure Piping Systems and Ground
Storage Vessels
1 Scope
2 Reference Publications
3 Definition
4 General Requirements
5 Compressed Natural Gas and Hydrogen Refuelling Station
Pressure Piping Systems
6 Compressed Natural Gas and Hydrogen Refuelling Station
Ground Storage Vessels
Applies to all boilers, pressure vessels, pressure piping, and fittings.
| DevelopmentNote |
This is a supplement to CSA B51. (12/2005)
|
| DocumentType |
Standard
|
| PublisherName |
Canadian Standards Association
|
| Status |
Withdrawn
|
| CSA Z305.3 : 0 | PRESSURE REGULATORS, GAUGES AND FLOW-METERING DEVICES FOR MEDICAL GASES |
| ASTM D 1400 : 2000 | Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base (Withdrawn 2006) |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| CSA B108 : 2014 | COMPRESSED NATURAL GAS FUELLING STATIONS INSTALLATION CODE |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| CAN/CSA-Z662-15 | Oil and gas pipeline systems |
| ASTM D 2344/D2344M : 2016 : REDLINE | Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates |
| ANSI K61.1 : 1999 | SAFETY REQUIREMENTS FOR THE STORAGE AND HANDLING OF ANHYDROUS AMMONIA |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| CGA G 5.4 : 2012 | STANDARD FOR HYDROGEN PIPING SYSTEMS AT USER LOCATIONS |
| ASTM G 154 : 2016 : REDLINE | Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials |
| CSA Z180.1 : 2013 | COMPRESSED BREATHING AIR AND SYSTEMS |
| BS EN 13322-2:2003 | Transportable gas cylinders. Refillable welded steel gas cylinders. Design and construction Stainless steel |
| ISO 148:1983 | Steel — Charpy impact test (V-notch) |
| CSA Z305.4 : 0 | QUALIFICATION REQUIREMENTS FOR AGENCIES TESTING NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS |
| ISO 6506:1981 | Metallic materials — Hardness test — Brinell test |
| ASTM D 1186 : 2001 | Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base (Withdrawn 2006) |
| ISO 6508:1986 | Metallic materials Hardness test Rockwell test (scales A - B - C - D - E - F - G - H - K) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| CSA Z299.4 : 1985 | QUALITY ASSURANCE PROGRAM - CATEGORY 4 |
| ASTM D 2794 : 1993 | TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| CSA ISO 9001 : 2016 | QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| CSA Z299.2 : 1985 | QUALITY ASSURANCE PROGRAM - CATEGORY 2 |
| ASTM E 8 : 2004 | Standard Test Methods for Tension Testing of Metallic Materials |
| CSA B109 : 2017 | NATURAL GAS FOR VEHICLES INSTALLATION CODE |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| CSA Z305.1 : 0 | NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| CSA Z299.3 : 1985 | QUALITY ASSURANCE PROGRAM - CATEGORY 3 |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
| CSA Z299.1 : 1985 | QUALITY ASSURANCE PROGRAM - CATEGORY 1 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.