CGA G 4.1 : 2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CLEANING EQUIPMENT FOR OXYGEN SERVICE
Superseded date
23-07-2013
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
1 Scope
2 Objectives
3 Planning requirements
4 Precleaning
5 Steam or hot water cleaning
6 Caustic cleaning
7 Acid cleaning
8 Solvent washing (including ultrasonic cleaning)
9 Vapor degreasing
10 Mechanical cleaning
11 Inspection
12 Packaging and labeling
13 Personnel safety
14 References
15 Additional references
Provides cleaning methods intended for equipment used in the production, storage, distribution and use of liquid and gaseous oxygen.
| DocumentType |
Standard
|
| PublisherName |
Compressed Gas Association
|
| Status |
Superseded
|
| SupersededBy |
| CGA M 8 : 2018 | STANDARD FOR THE MANUFACTURER OF CALIBRATION GAS STANDARDS USED TO ANALYZE MEDICAL AND FOOD GASES |
| ASTM D 3246 : 2015 : REDLINE | Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry |
| AEP-42 : 2006 | GUIDE TO USE OF MATERIALS IN OXYGEN-ENRICHED ENVIRONMENTS |
| CGA C 10 : 2013 | GUIDELINES TO PREPARE CYLINDERS AND TUBES FOR GAS SERVICE AND CHANGES IN GAS SERVICE |
| ASTM D 2504 : 1988 : R2004 : EDT 1 | Standard Test Method for Noncondensable Gases in C<sub>2</sub> and Lighter Hydrocarbon Products by Gas Chromatography |
| ASTM D 2504 : 1988 : R1998 | Standard Test Method for Noncondensable Gases in C<sub>2</sub> and Lighter Hydrocarbon Products by Gas Chromatography |
| MIL-STD-1411 Revision B:2010 | INSPECTION AND MAINTENANCE OF COMPRESSED GAS CYLINDERS |
| ASTM B 819 : 2018 : REDLINE | Standard Specification for Seamless Copper Tube for Medical Gas Systems |
| ISO 13577-1:2016 | Industrial furnaces and associated processing equipment Safety Part 1: General requirements |
| CGA G 4.7 : 2014 | INSTALLATION GUIDE FOR STATIONARY, ELECTRIC-MOTOR-DRIVEN, CENTRIFUGAL LIQUID OXYGEN PUMPS |
| ASTM G 93 : 2003 : EDT 1 | Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments |
| CGA AV 8 : 88(R1997) | CHARACTERISTICS AND SAFE HANDLING OF CRYOGENIC LIQUID AND GASEOUS OXYGEN |
| CGA P 8.9 : 2013 | BULK LIQUID OXYGEN, NITROGEN, AND ARGON STORAGE SYSTEMS AT PRODUCTION SITES |
| BS ISO 13577-1:2016 | Industrial furnaces and associated processing equipment. Safety General requirements |
| CGA P2-5 : 2011 | TRANSFILLING OF HIGH PRESSURE GASEOUS OXYGEN USED FOR RESPIRATION |
| CGA PS 13 : 2007 | CGA POSITION STATEMENT ON DEFINITION OF A THRESHOLD OXYGEN-MIXTURE CONCENTRATION REQUIRING SPECIAL CLEANING OF EQUIPMENT |
| CGA M 1 : 2018 | STANDARD FOR MEDICAL GAS SUPPLY SYSTEMS AT HEALTH CARE FACILITIES |
| ASTM G 127 : 2015 : REDLINE | Standard Guide for the Selection of Cleaning Agents for Oxygen-Enriched Systems |
| ASTM G 93 : 2003 : R2011 | Standard Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments |
| NFPA 51 : 2018 | DESIGN AND INSTALLATION OF OXYGEN-FUEL GAS SYSTEMS FOR WELDING, CUTTING, AND ALLIED PROCESSES |
| NFPA 99 : 2018 | HEALTH CARE FACILITIES CODE |
| MIL-R-13877 Revision D:1987 | REGULATOR, OXYGEN, ACETYLENE, WELDING APPLICATION |
| DEFSTAN 68-278/2(2016) : 2016 | CLEANING PROCEDURES & STANDARDS FOR NAVAL OXYGEN SYSTEM COMPONENTS |
| CGA P 48 : 2014 | RECIPROCATING CRYOGENIC PUMPS AND PUMP INSTALLATION |
| CGA PS 31 : 2007(R2014) | CGA POSITION STATEMENT ON CLEANLINESS FOR PROTON EXCHANGE MEMBRANES HYDROGEN PIPING/COMPONENTS |
| CGA M 5 : 2013 | GUIDE FOR HOME RESPIRATORY CARE FIRMS FILLING OR DISTRIBUTING LIQUID OXYGEN USP |
| CGA G 4.8 : 2013 | SAFE USE OF ALUMINUM-STRUCTURED PACKING FOR OXYGEN DISTILLATION |
| 16/30330093 DC : 0 | BS ISO 23208 - CRYOGENIC VESSELS - CLEANLINESS FOR CRYOGENIC SERVICE |
| BS ISO 15001 : 2003 AMD 15145 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - COMPATIBILITY WITH OXYGEN |
| CGA G 4.13 : 2012 | CENTRIFUGAL COMPRESSORS FOR OXYGEN SERVICE |
| NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
| CGA V 9 : 2012 | COMPRESSED GAS CYLINDER VALVES |
| CGA TB 12 : 97(R2002) | DESIGN CONSIDERATIONS FOR NONMETALLIC MATERIALS IN HIGH PRESSURE OXYGEN SUPPLY SYSTEMS |
| ASTM D 2504 : 1988 : R2010 | Standard Test Method for Noncondensable Gases in C<sub>2</sub> and Lighter Hydrocarbon Products by Gas Chromatography |
| NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
| 13/30231511 DC : 0 | BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
| NFPA 99C : 2005 | GAS AND VACUUM SYSTEMS |
| ASME B31.3:2016 | PROCESS PIPING |
| CSA Z275.2 : 2015 | OCCUPATIONAL SAFETY CODE FOR DIVING OPERATIONS |
| ASTM G 175 : 2013 : REDLINE | Standard Test Method for Evaluating the Ignition Sensitivity and Fault Tolerance of Oxygen Pressure Regulators Used for Medical and Emergency Applications |
| CGA G 4.3 : 2015 | COMMODITY SPECIFICATION FOR OXYGEN |
| CGA E 16 : 2015 | STANDARD FOR COMPRESSED GAS CHECK VALVES FOR PRESSURES UP TO 3000 PSI |
| ASTM G 128/G128M : 2015 : REDLINE | Standard Guide for Control of Hazards and Risks in Oxygen Enriched Systems |
| CGA P 45 : 2018 | FIRE HAZARDS OF OXYGEN AND OXYGEN-ENRICHED ATMOSPHERES |
| CSA Z180.1 : 2013 | COMPRESSED BREATHING AIR AND SYSTEMS |
| SAE J2343_201802 | Recommended Practice for LNG Medium and Heavy-Duty Powered Vehicles |
| Z7396.1-17 | Medical gas pipeline systems - Part 1: Pipelines for medical gases, medical vacuum, medical support gases, and anaesthetic gas scavenging systems |
| NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
| ISO 23208:2017 | Cryogenic vessels — Cleanliness for cryogenic service |
| CSA Z305.1 : 0 | NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS |
| ASTM D 2504 : 1988 : R2015 | Standard Test Method for Noncondensable Gases in C<inf>2</inf> and Lighter Hydrocarbon Products by Gas Chromatography (Withdrawn 2024) |
| CGA G 14 : 2017 | NITROGEN TRIFLUORIDE |
| CGA E 7 : 2013 | MEDICAL GAS PRESSURE REGULATORS, FLOWMETERS, AND ORIFICE FLOW SELECTORS |
| CGA G 4.6 : 2014 | OXYGEN COMPRESSOR INSTALLATION AND OPERATION GUIDE |
| CGA G 4.4 : 2012 | OXYGEN PIPELINE AND PIPING SYSTEMS |
| CGA P 27 : 2008 | RECOMMENDED HOSE MANAGEMENT PRACTICE FOR UNINSULATED STAINLESS STEEL CRYOGENIC CARGO TANK HOSE |
| CSA Z305.6 : 1992 | MEDICAL OXYGEN CONCENTRATOR CENTRAL SUPPLY SYSTEM FOR USE WITH NONFLAMMABLE MEDICAL GAS PIPING SYSTEMS |
| NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
| CGA P 12 : 2017 | SAFE HANDLING OF CRYOGENIC LIQUIDS |
| CGA E 8 : 2007(R2013) | GAS FLOWMETERS |
| CGA P 30 : 2013 | PORTABLE CRYOGENIC LIQUID CONTAINERS - USE, CARE, AND DISPOSAL |
| CGA H 3 : 2013 | CRYOGENIC HYDROGEN STORAGE |
| CGA G 4.9 : 2017 | SAFE USE OF BRAZED ALUMINUM HEAT EXCHANGERS FOR PRODUCING PRESSURIZED OXYGEN |
| BS ISO 23208:2017 | Cryogenic vessels. Cleanliness for cryogenic service |
| CGA SA 11 : 2000(R2009) | SAFETY ALERT, POTENTIAL FOR HIDDEN CRYOGENIC LIQUID CYLINDER CONTAMINATION |
| CGA G 4.10 : 2017 | USE OF NONMETALLIC MATERIALS IN HIGH PRESSURE OXYGEN BREATHING GAS APPLICATIONS |
| CGA P 46 : 2015 | SAFE HANDLING OF ELECTRONIC SPECIALTY GASES |
| AAGSP-11 : 2017 | GUIDE OF LUBRICANTS FOR USE IN OXYGEN SYSTEMS AND USE OF MATERIALS IN OXYGEN RICH ENVIRONMENTS |
| CGA F 3 : 2017 | GUIDELINE FOR QUALIFYING SUPPLIERS USED BY FOOD AND BEVERAGE GAS DISTRIBUTORS AND MANUFACTURERS |
| CGA P 8.4 : 2013 | SAFE OPERATION OF REBOILERS/CONDENSERS IN AIR SEPARATION UNITS |
| BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
| CGA P2-6 : 2011 | TRANSFILLING OF LIQUID OXYGEN USED FOR RESPIRATION |
| CGA V 6 : 2014 | STANDARD BULK REFRIGERATED LIQUID TRANSFER CONNECTIONS |
| CGA M 3 : 2015 | STANDARD FOR THE MANUFACTURER OF BULK MEDICAL GASES |
| CGA P 31 : 2012 | LIQUID OXYGEN, NITROGEN, AND ARGON CRYOGENIC TANKER LOADING SYSTEMS |
| CGA G 4.11 : 2017 | RECIPROCATING COMPRESSORS FOR OXYGEN SERVICE |
| DWA-M 143-20:2018 | TEST METHOD FOR DROP IMPACT RESISTANCE OF BLOW-MOLDED THERMOPLASTIC CONTAINERS |
| CGA P 8.8 : 2017 | SAFE DESIGN AND OPERATION OF CRYOGENIC ENCLOSURES |
| CGA E 15 : 2017 | GUIDELINE FOR PERIODIC SERVICE PROGRAM FOR INDUSTRIAL GAS REGULATORS |
| API RP 615 : 2016 | VALVE SELECTION GUIDE |
| ASTM G 88 : 2013 : REDLINE | Standard Guide for Designing Systems for Oxygen Service |
| CSA Z305.3 : 0 | PRESSURE REGULATORS, GAUGES AND FLOW-METERING DEVICES FOR MEDICAL GASES |
| CGA SB 31 : 2013 | HAZARDS OF OXYGEN IN THE HEALTH CARE ENVIRONMENT |
| CSA Z305.12 : 2006 | SAFE STORAGE, HANDLING, AND USE OF PORTABLE OXYGEN SYSTEMS IN RESIDENTIAL BUILDINGS AND HEALTH-CARE FACILITIES |
| CGA G 4 : 2015 | OXYGEN |
| CGA P 8 : 2013 | SAFE PRACTICES GUIDE FOR CRYOGENIC AIR SEPARATION PLANTS |
| CGA P 39 : 2015 | GUIDELINES FOR OXYGEN-RICH ATMOSPHERES |
| CGA P 8.1 : 2016 | SAFE INSTALLATION AND OPERATION OF PSA AND MEMBRANE OXYGEN AND NITROGEN GENERATORS |
| CGA O2 DIR : 2000 | 2000 DIRECTORY OF CLEANING AGENTS FOR OXYGEN SERVICE |
| ASTM D 8098 : 2017 | Standard Test Method for Permanent Gases in C<inf>2</inf> and C<inf>3</inf> Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector |
| CGA G 4.14 : 2017 | DESIGN, MANUFACTURE, INSTALLATION, OPERATION, AND MAINTENANCE OF VALVES USED IN LIQUID OXYGEN AND COLD GASEOUS OXYGEN SYSTEMS |
| ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
| PIP PHSMV036 : 2017 | HYGIENIC BRONZE - BALL VALVE DESCRIPTIONS |
| PIP PHSMV035 : 2017 | HYGIENIC BRONZE CHECK VALVE DESCRIPTIONS |
| PIP PNSM0115 : 2016 | PURCHASING REQUIREMENTS FOR PIPE |
| PIP PNSM0116 : 2013 | PURCHASING REQUIREMENTS FOR FITTINGS AND FLANGES |
| ASME B31.12 : 2014 | HYDROGEN PIPING AND PIPELINES |
| ASME B31.3 SPANISH : 2010 | PROCESS PIPING |
| PIP PNSM0105 : 2013 | PURCHASING REQUIREMENTS FOR GASKETS |
| CGA PS 13 : 2007 | CGA POSITION STATEMENT ON DEFINITION OF A THRESHOLD OXYGEN-MIXTURE CONCENTRATION REQUIRING SPECIAL CLEANING OF EQUIPMENT |
| CGA SA 11 : 2000(R2009) | SAFETY ALERT, POTENTIAL FOR HIDDEN CRYOGENIC LIQUID CYLINDER CONTAMINATION |
| CGA G 4.7 : 2014 | INSTALLATION GUIDE FOR STATIONARY, ELECTRIC-MOTOR-DRIVEN, CENTRIFUGAL LIQUID OXYGEN PUMPS |
| CGA G 4 : 2015 | OXYGEN |
| CGA G 4.8 : 2013 | SAFE USE OF ALUMINUM-STRUCTURED PACKING FOR OXYGEN DISTILLATION |
| CGA M 5 : 2013 | GUIDE FOR HOME RESPIRATORY CARE FIRMS FILLING OR DISTRIBUTING LIQUID OXYGEN USP |
| CGA G 4.3 : 2015 | COMMODITY SPECIFICATION FOR OXYGEN |
| CGA G 4.4 : 2012 | OXYGEN PIPELINE AND PIPING SYSTEMS |
| CGA V 9 : 2012 | COMPRESSED GAS CYLINDER VALVES |
| CGA AV 8 : 88(R1997) | CHARACTERISTICS AND SAFE HANDLING OF CRYOGENIC LIQUID AND GASEOUS OXYGEN |
| CGA TB 12 : 97(R2002) | DESIGN CONSIDERATIONS FOR NONMETALLIC MATERIALS IN HIGH PRESSURE OXYGEN SUPPLY SYSTEMS |
| CGA C 10 : 2013 | GUIDELINES TO PREPARE CYLINDERS AND TUBES FOR GAS SERVICE AND CHANGES IN GAS SERVICE |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.