CFR 49(PTS100-177) : OCT 2017
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
TRANSPORTATION
Superseded date
12-06-2019
Superseded by
Published date
12-01-2013
Publisher
Sorry this product is not available in your region.
DevelopmentNote |
Supersedes & Renumbers CFR 49(PTS100-185). (03/2012)
|
DocumentType |
Standard
|
PublisherName |
Code of Federal Regulations
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
NFPA 704 : 2017 | STANDARD SYSTEM FOR THE IDENTIFICATION OF THE HAZARDS OF MATERIALS FOR EMERGENCY RESPONSE |
API RP 754 : 2016 | PROCESS SAFETY PERFORMANCE INDICATORS FOR THE REFINING AND PETROCHEMICAL INDUSTRIES |
NFPA 495 : 2018 | EXPLOSIVE MATERIALS CODE |
API MPM CH8.3 : 1995(R2010) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
DOD-D-64015 Revision A:1986 | Diethylene Glycol Dinitrate (DEGDN) (for use in Ammunition) |
NFPA 473 : 2018 | COMPETENCIES FOR EMS PERSONNEL RESPONDING TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
SAE AMS 2644 : 2013 | INSPECTION MATERIAL, PENETRANT |
ASTM D 6368 : 2006 : R2012 | Standard Specification for Vapor-Degreasing Solvents Based on <emph type="bdit">normal</emph>-Propyl Bromide and Technical Grade <emph type="bdit">normal</emph>-Propyl Bromide |
ASTM D 6517 : 2000 : R2005 | Standard Guide for Field Preservation of Groundwater Samples |
ANSI N14.5 : 2014 | RADIOACTIVE MATERIALS - LEAKAGE TESTS ON PACKAGES FOR SHIPMENT |
MIL L 12039 : D | LITHIUM HYDRIDE, TECHNICAL (METRIC) |
MIL A 24641 : A | ACID, HYDROFLUORIC; TECHNICAL |
MIL-PRF-32518 Base Document:2015 | INTERIOR HEAD IMPACT PROTECTION FOR USE IN U.S. ARMY MILITARY VEHICLE INTERIORS |
MIL-STD-3001-1 Revision A:2014 | PREPARATION OF DIGITAL TECHNICAL INFORMATION FOR MULTI-OUTPUT PRESENTATION OF TECHNICAL MANUALS (PART 1 OF 8 PARTS) |
A-A-52545 Revision B:2009 | HEATERS, VEHICULAR COMPARTMENT 28 VOLT, DC |
SAE AS 1066 : 2012 | MINIMUM STANDARDS FOR VALVE, HIGH PRESSURE OXYGEN, CYLINDER SHUT OFF, MANUALLY OPERATED |
AAMI TIR15 : 2016 | PHYSICAL ASPECTS OF ETHYLENE OXIDE STERILIZATION |
IEEE/ANSI N323AB-2013 | American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments |
ASTM D 7678 : 2017 : REDLINE | Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy |
AAMI ST24 : 1999 : R2013 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
ISO/TS 15453:2017 | Gas cylinders — Seamless steel and aluminium-alloy gas cylinders — Evaluation of existing gas cylinders and consideration of their safe use in other jurisdictions |
AAMI ST41 : 2008 | ETHYLENE OXIDE STERILIZATION IN HEALTH CARE FACILITIES: SAFETY AND EFFECTIVENESS |
SAE J 2851 : 2015 | RECOVERY EQUIPMENT FOR CONTAMINATED R-134A OR R-1234YF REFRIGERANT FROM MOBILE AUTOMOTIVE AIR CONDITIONING SYSTEMS |
ASTM D 5396 : 2004 : R2010 | Standard Specification for Reclaimed Perchloroethylene |
NFPA 318 : 2018 | PROTECTION OF SEMICONDUCTOR FABRICATION FACILITIES |
NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
NFPA 40 : 2016 | STORAGE AND HANDLING OF CELLULOSE NITRATE FILM |
NFPA 45 : 2015 | FIRE PROTECTION FOR LABORATORIES USING CHEMICALS |
NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
NFPA 407 : 2017 | AIRCRAFT FUEL SERVICING |
NFPA 35 : 2016 | MANUFACTURE OF ORGANIC COATINGS |
NFPA 307 : 2016 | CONSTRUCTION AND FIRE PROTECTION OF MARINE TERMINALS, PIERS, AND WHARVES |
NFPA 17A : 2017 | WET CHEMICAL EXTINGUISHING SYSTEMS |
NFPA 2010 : 2015 | FIXED AEROSOL FIRE-EXTINGUISHING SYSTEMS |
NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
NFPA 17 : 2017 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
NFPA 2001 : 2018 | CLEAN AGENT FIRE EXTINGUISHING SYSTEMS |
UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
MIL-PRF-32565 Revision A:2017 | BATTERY, RECHARGEABLE, SEALED, 6T LITHIUM-ION |
ASHRAE GUIDELINE 39 : 2017 | METHOD OF TEST FOR MEASURING FRACTIONATED COMPOSITIONS OF REFRIGERANT BLENDS |
SAE J 1538 : 2015 | GLOSSARY OF AUTOMOTIVE INFLATABLE RESTRAINT SYSTEMS |
NFPA 1124 : 2017 | MANUFACTURE, TRANSPORTATION, AND STORAGE OF FIREWORKS AND PYROTECHNIC ARTICLES |
ASTM D 8061 : 2016 | Standard Practice for Handling, Transportation, and Storage of 2-Bromo-3,3,3-Trifluoro-1-Propene (CF<inf>3</inf>CBr=CH<inf>2</inf>) |
SAE AIR 5690 : 2006 | RATIONALE FOR REPLACEMENT OF PYROTECHNIC SIGNALING DEVICES IN SURVIVAL KITS ON TRANSPORT CATEGORY AIRCRAFT LIFE RAFTS AND SLIDE-RAFTS |
SAE AIR 5742 : 2017 | PACKAGING AND TRANSPORTATION OF OXYGEN EQUIPMENT |
MIL-C-48617 Revision A:1983 | CARTRIDGE, 20 MM, HIGH EXPLOSIVE, INCENDIARY, M56A4 LOADING, ASSEMBLING AND PACKING |
MIL-B-18147 Revision C:1983 | BOATS AND CRAFT; PREPARATION FOR DELIVERY OF |
API 781 : 2016 | FACILITY SECURITY PLAN METHODOLOGY FOR THE OIL AND NATURAL GAS INDUSTRIES |
API 780 : 2013 | SECURITY RISK ASSESSMENT METHODOLOGY FOR THE PETROLEUM AND PETROCHEMICAL INDUSTRIES |
ASTM D 4547 : 2015 : REDLINE | Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds |
MIL-PRF-83671 Revision B:1997 | FOAM-IN-PLACE PACKAGING MATERIALS, GENERAL SPECIFICATION FOR |
DOD-M-64040 Revision A:1986 | METHYL DIPHENYLUREA |
SAE AS 6163 : 2015 | TEMPERATURE CONTROLLED CONTAINER - PERFORMANCE REQUIREMENTS AND TEST PARAMETERS |
ASTM D 5632/D5632M : 2017 : REDLINE | Standard Specification for Halon 1301, Bromotrifluoromethane (CF<inf>3</inf>Br) |
SAE AIR 1059 : 2017 | OXYGEN CYLINDER QUALITY, SERVICEABILITY, MAINTENANCE TRANSFILLING AND MARKING |
ASTM D 7815 : 2017 : REDLINE | Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF<inf>2</inf>BrCl) |
MIL-DTL-87177 Revision B:2014 | Lubricants, Corrosion Preventive Compound, Water Displacing, Synthetic |
ASTM D 5616 : 2004 : R2010 | Standard Specification for Reclaimed Trichloroethylene |
NFPA 1072:2017 | HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION EMERGENCY RESPONSE PERSONNEL PROFESSIONAL QUALIFICATIONS |
NFPA 1122 : 2018 | CODE FOR MODEL ROCKETRY |
SAE AS 87132 : 2012(R2018) | LUBRICANT, CETYL ALCOHOL, 1-HEXADECANOL, APPLICATION TO FASTENERS |
NFPA 1125 : 2017 | MANUFACTURE OF MODEL ROCKET AND HIGH-POWER ROCKET MOTORS |
AAMI ST24 : 1999 : R2005 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
ANSI A10.7 : 2011 | SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS |
FM 5320 : 2013 | DRY CHEMICAL EXTINGUISHING SYSTEMS |
ASTM D 6911 : 2015 : REDLINE | Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis |
ASTM D 5396 : 2004 | Standard Specification for Reclaimed Perchloroethylene |
ASTM E 2601 : 2015 : REDLINE | Standard Practice for Radiological Emergency Response |
ASTM D 6954 : 2018 : REDLINE | Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation |
ASTM D 5616 : 2004 | Standard Specification for Reclaimed Trichloroethylene |
ASTM D 7887 : 2013 | Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests |
NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
NFPA 301 : 2018 | SAFETY TO LIFE FROM FIRE ON MERCHANT VESSELS |
NFPA 58 : 2017 | LIQUEFIED PETROLEUM GAS CODE |
ICC 2012 INTERNATIONAL BUILDING CODE : 2012 | INTERNATIONAL BUILDING CODE |
ASTM D 7327 : 2017 : REDLINE | Standard Specification for HFC Blend B (CH<inf>2</inf>FCF<inf>3</inf>, CHF<inf>2</inf >CF<inf>3</inf>, and CO<inf>2</inf>) |
ANSI/AAMI ST79:2017 | COMPREHENSIVE GUIDE TO STEAM STERILIZATION AND STERILITY ASSURANCE IN HEALTH CARE FACILITIES |
NFPA 1 : 2021 | FIRE CODE |
NFPA 498 : 2018 | SAFE HAVENS AND INTERCHANGE LOTS FOR VEHICLES TRANSPORTING EXPLOSIVES |
MIL-A-48690 Base Document:1987 | ACTUATOR, PISTON, PA532 LOADING, ASSEMBLING, AND PACKING |
ANSI A10.7 : 2011 | SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS |
ASTM D 5396 : 2004 : R2015 | Standard Specification for Reclaimed Perchloroethylene |
AAMI ST24 : 1999 : R2009 | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
SAE ARP 4378 : 2017 | ACCUMULATOR, HYDRAULIC, WELDED BELLOWS, FACTORY PRE-CHARGED |
FAA AC 91-70 : 2016 | OCEANIC AND REMOTE CONTINENTAL AIRSPACE OPERATIONS |
MIL C 48669 : 0 | CARTRIDGE, 40MM, M918 TP, ESCAPEMENT ASSEMBLY FOR METAL PARTS AND LOADING, ASSEMBLING AND PACKAGING |
FAA AC 91-84 : 2009 | FRACTIONAL OWNERSHIP PROGRAMS |
NFPA 1126 : 2016 | USE OF PYROTECHNICS BEFORE A PROXIMATE AUDIENCE |
ASTM D 5616 : 2004 : R2016 | Standard Specification for Reclaimed Trichloroethylene |
MIL-DTL-48360 Revision A:2014 | Charge, Propelling, M200, for 105MM Howitzer, M119 Loading, Assembling and Packing |
MIL-N-246 Revision B:1962 | NITROGLYCERIN |
MIL-A-22262 Revision B:1993 | ABRASIVE BLASTING MEDIA SHIP HULL BLAST CLEANING |
MIL-PRF-32516 Base Document:2015 | ELECTRONIC TEST EQUIPMENT, INTERMITTENT FAULT DETECTION AND ISOLATION FOR CHASSIS AND BACKPLANE CONDUCTIVE PATHS |
NFPA 53 : 2016 | MATERIALS, EQUIPMENT, AND SYSTEMS USED IN OXYGEN-ENRICHED ATMOSPHERES |
SAE AMSA8576A:1997(S2016) | ADHESIVE, ACRYLIC BASE, FOR ACRYLIC PLASTIC |
SAE ARP 5818 : 2015 | AIRCRAFT REFUELING VEHICLE DESIGN AND PERFORMANCE REQUIREMENTS |
SAE AMS 3066 : 2016 | COMPOUND, CORROSION-INHIBITING WATER-DISPLACING, SOFT FILM, AEROSOL CANNED |
API MPM CH8.3 : 1995 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
NFPA 475 : 2017 | RECOMMENDED PRACTICE FOR ORGANIZING, MANAGING, AND SUSTAINING A HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION RESPONSE PROGRAM |
AAMI ST24:1999(R2018) | AUTOMATIC, GENERAL-PURPOSE ETHYLENE OXIDE STERILIZERS AND ETHYLENE OXIDE STERILANT SOURCES INTENDED FOR USE IN HEALTH CARE FACILITIES |
ASTM D 7673/D7673M : 2015 : REDLINE | Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF<inf>2</inf>BrCl) |
NFPA 921 : 2017 | GUIDE FOR FIRE AND EXPLOSION INVESTIGATIONS |
ASTM F 2995 : 2013 | Standard Guide for Shipping Possibly Infectious Materials, Tissues, and Fluids |
ASTM E 1302 : 2013 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM D 8134 : 2018 | Standard Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations (UN) IBC Design Types |
ASTM E 1302 : 2013 : R2017 | Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids |
ASTM F 963 : 2017 : REDLINE | Standard Consumer Safety Specification for Toy Safety |
ASTM D 6517 : 2000 : R2012 : EDT 1 | Standard Guide for Field Preservation of Groundwater Samples |
ASTM D 6368 : 2006 | Standard Specification for Vapor-Degreasing Solvents Based on <bdit>normal</bdit>-Propyl Bromide and Technical Grade <bdit>normal</bdit>-Propyl Bromide |
ASTM D 4995 : 2010 | Standard Specifications for Electronic and Degreasing Grades of 1,1,2-Trichloro 1,2,2,-Trifluoroethane Solvent |
NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
NASA SPEC 5022:2015 | NASA MANUFACTURING AND TEST REQUIREMENTS FOR NORMALLY CLOSED PYROVALVES FOR HAZARDOUS FLIGHT SYSTEMS APPLICATIONS |
NASA MSFC SPEC 3635 : 2012 | PYROTECHNIC SYSTEM SPECIFICATION |
NASA JSC 20793 : 2017 | CREWED SPACE VEHICLE BATTERY SAFETY REQUIREMENTS |
ASTM D 8060 : 2017 : REDLINE | Standard Specification for 2-Bromo-3,3,3-Trifluoro-1-Propene (CF<inf>3</inf>CBr=CH<inf >2</inf>) |
NFPA 472 : 2018 | COMPETENCE OF RESPONDERS TO HAZARDOUS MATERIALS/WEAPONS OF MASS DESTRUCTION INCIDENTS |
API MPM CH8.3 SPANISH : 1995 | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
MIL-PRF-24596 Revision B:2009 | COATING COMPOUNDS, NONFLAMING, FIRE-RESISTANT |
NFPA 1405 : 2016 | LAND-BASED FIRE DEPARTMENTS THAT RESPOND TO MARINE VESSEL FIRES |
15/30264711 DC : 0 | BS EN ISO 11148-13 - HAND-HELD NON-ELECTRIC POWER TOOLS - SAFETY REQUIREMENTS - PART 13: FASTENER DRIVING TOOLS |
API 1169 : 2013 | RECOMMENDED PRACTICE FOR BASIC INSPECTION REQUIREMENTS - NEW PIPELINE CONSTRUCTION |
API 3000 : 2014 | CLASSIFYING AND LOADING OF CRUDE OIL INTO RAIL TANK CARS |
ANSI/AAMI ST58:2013(R2018) | CHEMICAL STERILIZATION AND HIGH-LEVEL DISINFECTION IN HEALTH CARE FACILITIES |
ASTM D 4995 : 2010 : R2015 | Standard Specification for Electronic and Degreasing Grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane Solvent |
ASTM D 6517 : 2000 | Standard Guide for Field Preservation of Ground-Water Samples |
FAA AC 120-95 : 2016 | PORTABLE OXYGEN CONCENTRATORS |
SAE J 2788 : 2013 | HFC-134A (R-134A) RECOVERY/RECYCLING/RECHARGING EQUIPMENT FOR MOBILE AIR-CONDITIONING SYSTEMS |
MIL-PRF-32143 Revision B:2011 | BATTERIES, STORAGE: AUTOMOTIVE, VALVE REGULATED LEAD ACID (VRLA) |
AWWA B512 : 2015 | SULFUR DIOXIDE |
FAA AC 133-1 : 2017 | ROTORCRAFT EXTERNAL-LOAD OPERATIONS |
NFPA 1123 : 2018 | Code for Fireworks Display<br> |
ASTM D 5998 : 2016 : REDLINE | Standard Specification for Molded Polyethylene Shipping and Storage Drums |
MIL-PRF-53064 Revision C:2017 | HOSE ASSEMBLY, ELASTOMER: LIGHTWEIGHT, COLLAPSIBLE; LIQUID FUEL |
MIL-DTL-24641 Revision B:2015 | ACID, HYDROFLUORIC, TECHNICAL |
SAE AMS 2821 : 2017 | SALTS, HEAT-TREATING (FOR METALS) |
SAE AS 1046 : 2016 | MINIMUM STANDARD FOR PORTABLE GASEOUS, OXYGEN EQUIPMENT |
SAE J 560 : 2016 | PRIMARY AND AUXILIARY SEVEN CONDUCTOR ELECTRICAL CONNECTOR FOR TRUCK-TRAILER JUMPER CABLE |
ASTM F 1190 : 2018 : REDLINE | Standard Guide for Neutron Irradiation of Unbiased Electronic Components |
SAE J 2843 : 2013 | R-1234YF [HFO-1234YF] RECOVERY/RECYCLING/RECHARGING EQUIPMENT FOR FLAMMABLE REFRIGERANTS FOR MOBILE AIR-CONDITIONING SYSTEMS |
MIL-A-10840 Revision D:1982 | ARSENIC TRIOXIDE, TECHNICAL |
ANSI A10.7 REDLINE : 2011 | COMPARISON DOCUMENT OF A10.7 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR TRANSPORTATION, STORAGE, HANDLING AND USE OF COMMERCIAL EXPLOSIVES AND BLASTING AGENTS (FOR VERSIONS 1998 AND 2011) |
NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
NFPA 385 : 2017 | TANK VEHICLES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
NFPA 513 : 1998 | MOTOR FREIGHT TERMINALS |
MIL-STD-1320 Revision D:2014 | FOR DESIGNING UNIT LOADS, TRUCKLOADS, RAILCAR LOADS, AND INTERMODAL LOADS FOR AMMUNITION AND EXPLOSIVES |
UFC 3-810-01N : Change 1 | UNIFIED FACILITIES CRITERIA - NAVY AND MARINE CORPS ENVIRONMENTAL ENGINEERING FOR FACILITY CONSTRUCTION |
MIL-A-82728 Base Document:1984 | ALUMINUM POWDER, ATOMIZED (FOR USE IN EXPLOSIVES) |
O-E-751 Revision D:2015 | ETHER, PETROLEUM; TECHNICAL GRADE |
NFPA 12 : 2018 | CARBON DIOXIDE EXTINGUISHING SYSTEMS |
API MPM CH8.3 : 1995(R2018) | MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 8: SAMPLING - SECTION 3: STANDARD PRACTICE FOR MIXING AND HANDLING OF LIQUID SAMPLES OF PETROLEUM AND PETROLEUM PRODUCTS |
NFPA 484 : 2015 | COMBUSTIBLE METALS |
CGA SA 24 : 2012 | SAFETY ALERT - EMERGENCY MEDICAL SERVICES FILLING OXYGEN OR AIR FOR HUMAN RESPIRATION |
SAE AIR 825/8 : 2012 | CONTINUOUS FLOW OXYGEN SYSTEMS |
SAE J 2950 : 2012 | RECOMMENDED PRACTICES (RP) FOR SHIPPING TRANSPORT AND HANDLING OF AUTOMOTIVE-TYPE BATTERY SYSTEM - LITHIUM ION |
SAE ARP 1894 : 2014 | USEFUL LIFE DETERMINATION FOR CHEMICAL OXYGEN GENERATORS |
ASTM D 7326 : 2017 : REDLINE | Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH<inf >2</inf>FCF<inf>3</inf>, CHF<inf>2</inf> CF<inf>3</inf>, and CO<inf >2</inf>) |
SAE J 3030 : 2015 | AUTOMOTIVE REFRIGERANT RECOVERY/RECYCLING/RECHARGING EQUIPMENT INTENDED FOR USE WITH BOTH R-1234YF AND R-134A |
SAE J 2810 : 2016 | HFC-134A (R-134A) REFRIGERANT RECOVERY EQUIPMENT FOR MOBILE AUTOMOTIVE AIR-CONDITIONING SYSTEMS |
ASTM E 2169 : 2017 : REDLINE | Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids |
NFPA 1 : 2018 | FIRE CODE |
ASME STP-PT-003 : 2005 | HYDROGEN STANDARDIZATION INTERIM REPORT FOR TANKS, PIPING, AND PIPELINES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.