CEN/TS 16640 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD
01-02-2017
25-03-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Principle
6 Determination of the [14]C content
7 Calculation of the bio-based carbon content
8 Test report
Annex A (informative) - Procedures for sampling
of products
Annex B (normative) - Procedure for the conversion of
the carbon present in the sample to a
suitable sample for [14]C determination
Annex C (normative) - Method A - Liquid scintillation-counter
method (LSC)
Annex D (normative) - Method B - Beta-ionization (BI)
Annex E (normative) - Method C - Accelerator Mass
Spectrometry (AMS)
Annex F (informative) - Definitions and formulae of the
[14]C based method
Bibliography
Describes a method for the determination of the bio-based carbon content in products, based on the [14]C content measurement.
Committee |
TC 411
|
DocumentType |
Standard
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Superseded
|
Standards | Relationship |
DIN SPEC 35800 : 2014 | Identical |
XP CEN/TS 16640 : 2014 XP | Identical |
UNI CEN/TS 16640 : 2014 | Identical |
NEN NPR CEN/TS 16640 : 2014 | Identical |
DIN CEN/TS 16640;DIN SPEC 35800:2014-05 | Identical |
PD CEN/TS 16640:2014 | Identical |
S.R. CEN/TS 16640:2014 | Identical |
15/30320144 DC : 0 | BS EN 16785-2 - BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 2: DETERMINATION OF THE BIO-BASED CONTENT USING THE MATERIAL BALANCE METHOD |
I.S. EN 16848:2016 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
I.S. EN 16785-1:2015 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
PREN 16848 : DRAFT 2015 | BIO-BASED PRODUCTS - TEMPLATE FOR B2B REPORTING AND COMMUNICATION OF CHARACTERISTICS - DATA SHEET |
PD CEN/TR 16957:2016 | Bio-based products. Guidelines for Life Cycle Inventory (LCI) for the End-of-life phase |
PD CEN/TS 16766:2015 | Bio-based solvents. Requirements and test methods |
BS EN 16807:2016 | Liquid petroleum products. Bio-lubricants. Criteria and requirements of bio-lubricants and bio-based lubricants |
14/30304809 DC : 0 | BS EN 16785 - BIO-BASED PRODUCTS - DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
UNE-EN 16807:2017 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
UNE-EN 16848:2017 | Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet |
BS EN 16785-1:2015 | Bio-based products. Bio-based content Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
UNE-EN 16785-1:2016 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
BS ISO 16620-2:2015 | Plastics. Biobased content Determination of biobased carbon content |
ASTM D 6866 : 2018 : REDLINE | Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis |
EN 16785-1:2015 | Bio-based products - Bio-based content - Part 1: Determination of the bio-based content using the radiocarbon analysis and elemental analysis |
EN 16807:2016 | Liquid petroleum products - Bio-lubricants - Criteria and requirements of bio-lubricants and bio-based lubricants |
DIN EN 16785-1:2016-03 | BIO-BASED PRODUCTS - BIO-BASED CONTENT - PART 1: DETERMINATION OF THE BIO-BASED CONTENT USING THE RADIOCARBON ANALYSIS AND ELEMENTAL ANALYSIS |
ISO 16620-2:2015 | Plastics Biobased content Part 2: Determination of biobased carbon content |
14/30312370 DC : 0 | BS EN 16807 - LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
S.R. CEN/TS 16766:2015 | BIO-BASED SOLVENTS - REQUIREMENTS AND TEST METHODS |
15/30317877 DC : 0 | BS EN 16848 - BIO-BASED PRODUCTS - TEMPLATE FOR B2B REPORTING AND COMMUNICATION OF CHARACTERISTICS - DATA SHEET |
S.R. CEN/TR 16957:2016 | BIO-BASED PRODUCTS - GUIDELINES FOR LIFE CYCLE INVENTORY (LCI) FOR THE END-OF-LIFE PHASE |
I.S. EN 16807:2016 | LIQUID PETROLEUM PRODUCTS - BIO-LUBRICANTS - CRITERIA AND REQUIREMENTS OF BIO-LUBRICANTS AND BIO-BASED LUBRICANTS |
DIN EN 16848:2015-04 (Draft) | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
CEN/TS 16766 : 2015 | BIO-BASED SOLVENTS - REQUIREMENTS AND TEST METHODS |
CEN/TS 16137:2011 | Plastics - Determination of bio-based carbon content |
ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
EN 15440 : 2011 COR 2011 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF BIOMASS CONTENT |
ISO 10715:1997 | Natural gas — Sampling guidelines |
CEN/TR 14980:2004 | Solid recovered fuels - Report on relative difference between biodegradable and biogenic fractions of SRF |
ISO 8943:2007 | Refrigerated light hydrocarbon fluids Sampling of liquefied natural gas Continuous and intermittent methods |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
PREN 16575 : DRAFT 2013 | BIO-BASED PRODUCTS - VOCABULARY |
EN ISO 4257:2001 | Liquefied petroleum gases - Method of sampling (ISO 4257:2001) |
ISO 1928:2009 | Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value |
ISO 10210:2012 | Plastics — Methods for the preparation of samples for biodegradation testing of plastic materials |
ASTM C 224 : 1978 | PRACTICE FOR SAMPLING GLASS CONTAINERS |
ISO 13833:2013 | Stationary source emissions Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide Radiocarbon sampling and determination |
CEN/TR 15932:2010 | Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics |
EN 13137 : 2001 | CHARACTERIZATION OF WASTE - DETERMINATION OF TOTAL ORGANIC CARBON (TOC) IN WASTE, SLUDGES AND SEDIMENTS |
EN 15442:2011 | Solid recovered fuels - Methods for sampling |
EN 14778:2011 | Solid biofuels - Sampling |
EN 14780:2011 | Solid biofuels - Sample preparation |
EN 15443:2011 | Solid recovered fuels - Methods for the preparation of the laboratory sample |
EN ISO 13833:2013 | Stationary source emissions - Determination of the ratio of biomass (biogenic) and fossil-derived carbon dioxide - Radiocarbon sampling and determination (ISO 13833:2013) |
ASTM C 322 : 2009 | Standard Practice for Sampling Ceramic Whiteware Clays |
EN 15400:2011 | Solid recovered fuels - Determination of calorific value |
ISO 1795:2017 | Rubber, raw natural and raw synthetic — Sampling and further preparative procedures |
ISO 4257:2001 | Liquefied petroleum gases Method of sampling |
ASTM D 6085 : 1997 | Standard Practice for Sampling in Rubber Testing--Terminology and Basic Concepts |
ISO 186:2002 | Paper and board — Sampling to determine average quality |
CEN/TR 15591:2007 | Solid recovered fuels - Determination of the biomass content based on the 14C method |
ASTM D 3437 : 2015 : REDLINE | Standard Practice for Sampling and Handling Liquid Cyclic Products |
EN 27213 : 1993 | PULPS - SAMPLING FOR TESTING |
ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
ASTM D 7026 : 2013 | Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis (Withdrawn 2020) |
EN ISO 186:2002 | Paper and board - Sampling to determine average quality (ISO 186:2002) |
ISO 20904:2006 | Hard coal Sampling of slurries |
EN ISO 10715:2000 | Natural gas - Sampling guidelines (ISO 10715:1997) |
ASTM D 5291 : 2016 : REDLINE | Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants |
ISO 18283:2006 | Hard coal and coke Manual sampling |
EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
ASTM D 2915 : 2017 : REDLINE | Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products |
ISO 7213:1981 | Pulps Sampling for testing |
EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.