CEN/TS 16368:2014
Current
The latest, up-to-date edition.
Lightweight Particleboards - Specifications
19-03-2014
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Classification of boards
5 General requirements for all board types
6 Requirements
7 Requirements for general purpose lightweight
boards for use in dry conditions (Type LP1)
8 Requirements for general purpose (including
furniture) lightweight boards for use in dry
conditions (Type LP2)
9 Supplementary properties
10 Verification of compliance
11 Marking
Bibliography
This European Technical Specification specifies the requirements for uncoated particleboards for use in dry conditions in non load-bearing applications with density below 600 kg/m3.This Technical Specification applies to particleboard which is mostly homogenous and continuous in its composition and which does not contain hollow spaces, chambers or other type of cavities which can be encountered as honeycombs in sandwich panels or as tubes in extruded boards.This Technical Specification does not give requirements for extruded particleboards (see EN 14755), flaxboards (see EN 15197) and sandwich panels.NOTETypical applications for lightweight boards are in furniture and non-structural applications e.g. in doors, packaging.
| Committee |
CEN/TC 112
|
| DevelopmentNote |
Supersedes PREN 16368. (04/2014)
|
| DocumentType |
Technical Specification
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| UNI CEN/TS 16368 : 2014 | Identical |
| DIN CEN/TS 16368;DIN SPEC 68286:2014-06 | Identical |
| SNR CEN/TS 16368 : 2014 | Identical |
| PD CEN/TS 16368:2014 | Identical |
| NEN NPR CEN/TS 16368 : 2014 | Identical |
| S.R. CEN/TS 16368:2014 | Identical |
| PNE-prEN 16368 | Identical |
| EN 326-3:2003 | Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels |
| EN 319:1993 | Particleboards and fibreboards - Determination of tensile strength perpendicular to the plane of the board |
| EN 120:1992 | Wood based panels - Determination of formaldehyde content - Extraction method called the perforator method |
| EN 310:1993 | Wood-based panels - Determination of modulus of elasticity in bending and of bending strength |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 322:1993 | Wood-based panels - Determination of moisture content |
| EN 14755:2005 | Extruded particleboards - Specifications |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 324-1:1993 | Wood-based panels - Determination of dimensions of boards - Part 1: Determination of thickness, width and length |
| EN 317:1993 | Particleboards and fibreboards - Determination of swelling in thickness after immersion in water |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| EN 312:2010 | Particleboards - Specifications |
| EN 324-2:1993 | Wood-based panels - Determination of dimensions of boards - Part 2: Determination of squareness and edge straightness |
| EN 323:1993 | Wood-based panels - Determination of density |
| EN 15197:2007 | Wood-based panels - Flaxboards - Specifications |
| EN 318:2002 | Wood based panels - Determination of dimensional changes associated with changes in relative humidity |
| EN 309:2005 | Particleboards - Definition and classification |
| EN 311:2002 | Wood-based panels - Surface soundness - Test method |
| ISO 3340:1976 | Fibre building boards — Determination of sand content |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.