CEN/TR 16671:2014
Current
The latest, up-to-date edition.
Information technology - Authorization of mobile phones when used as RFID interrogators
04-06-2014
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviations
5 Executive summary and conclusions
6 Extending NFC phones capabilities to
read RFID tags
7 Mobile phones enhanced with UHF RFID
readers
8 Development of multi-protocol readers
9 Mobile phones as access portal for
Internet of Things
Annex A (informative) - ISO/IEC 14443
Eavesdropping and Activation
Distance
Bibliography
The scope of this Technical Report is to explore developments in the use of mobile phones as RFID interrogators. It uses as a datum the communication protocols developed for near field communication, which have a defined level of security. This Technical Report will explore known developments in the use of mobile phones as RFID interrogators including (but not limited to):—extending NFC phone capabilities to read RFID tags compliant with ISO/IEC 15693 and ISO/IEC 18000-3 Mode 1;—using mobile phones as interrogators for UHF tags based on ISO/IEC 18000-6 Type C;—the development of multi-protocol readers capable of switching between high frequency and UHF.The objective of the Technical Report is to identify specific characteristics associated with mobile phones being used as interrogators with tags that are primarily intended for other purposes. It will identify some potential threats associated with the technology. It will also identify gaps in the standardization process that might need to be addressed to mitigate against such threats.To counterbalance any negative implications, the Technical Report also identifies real and potential applications that could lead to an accelerated take-up of RFID and the Internet of Things through mobile phones being used as RFID interrogators by individual citizens and organizations.
Committee |
CEN/TC 225
|
DocumentType |
Technical Report
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
NEN NPR CEN/TR 16671 : 2014 | Identical |
S.R. CEN/TR 16671:2014 | Identical |
ISO/IEC 14443-1:2016 | Identification cards Contactless integrated circuit cards Proximity cards Part 1: Physical characteristics |
ISO/IEC 18047-6:2017 | Information technology — Radio frequency identification device conformance test methods — Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
ISO/IEC 15693-2:2006 | Identification cards Contactless integrated circuit cards Vicinity cards Part 2: Air interface and initialization |
ISO/IEC TR 18047-3:2011 | Information technology Radio frequency identification device conformance test methods Part 3: Test methods for air interface communications at 13,56 MHz |
ISO/IEC 21481:2012 | Information technology Telecommunications and information exchange between systems Near Field Communication Interface and Protocol -2 (NFCIP-2) |
ISO/IEC 15693-3:2009 | Identification cards Contactless integrated circuit cards Vicinity cards Part 3: Anticollision and transmission protocol |
EN 300 220-3 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT TO BE USED IN THE 25 MHZ TO 1 000 MHZ FREQUENCY RANGE WITH POWER LEVELS RANGING UP TO 500 MW; PART 3: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
ISO/IEC 14443-4:2016 | Identification cards Contactless integrated circuit cards Proximity cards Part 4: Transmission protocol |
ISO/IEC 29143:2011 | Information technology — Automatic identification and data capture techniques — Air interface specification for Mobile RFID interrogators |
ISO/IEC 18046-1:2011 | Information technology — Radio frequency identification device performance test methods — Part 1: Test methods for system performance |
ISO/IEC 18092:2013 | Information technology — Telecommunications and information exchange between systems — Near Field Communication — Interface and Protocol (NFCIP-1) |
EN 300 220-2 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1 000 MHZ - PART 2: HARMONISED STANDARD FOR ACCESS TO RADIO SPECTRUM FOR NON SPECIFIC RADIO EQUIPMENT |
ISO/IEC 18046-2:2011 | Information technology Radio frequency identification device performance test methods Part 2: Test methods for interrogator performance |
ISO/IEC 7810:2003 | Identification cards Physical characteristics |
ISO/IEC 18046-3:2012 | Information technology Radio frequency identification device performance test methods Part 3: Test methods for tag performance |
EN 302 208-2 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
ISO/IEC 14443-2:2016 | Identification cards Contactless integrated circuit cards Proximity cards Part 2: Radio frequency power and signal interface |
EN 300 220-1 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
ISO/IEC 14443-3:2016 | Identification cards Contactless integrated circuit cards Proximity cards Part 3: Initialization and anticollision |
ISO/IEC 18000-1:2008 | Information technology Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized |
ISO/IEC 18000-63:2015 | Information technology Radio frequency identification for item management Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C |
EN 302 208-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 1: TECHNICAL REQUIREMENTS AND METHODS OF MEASUREMENT |
ISO/IEC 15693-1:2010 | Identification cards Contactless integrated circuit cards Vicinity cards Part 1: Physical characteristics |
ISO/IEC 18000-3:2010 | Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.