CEN/TR 15367-3:2009
Current
The latest, up-to-date edition.
Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination
21-01-2009
Foreword
Introduction
1 Scope
2 Normative references
3 Fuels under consideration
4 Supply chain definition
5 Potential sources of cross contamination
in the supply chain
6 Housekeeping guidelines
6.1 Elements of good housekeeping
6.1.1 Operations
6.1.2 Hardware
6.1.3 Maintenance
6.2 Detailed recommendations
6.2.1 General
6.2.2 Refineries
6.2.3 Transport and operations
6.2.4 Terminals
6.2.5 Filling Stations
Annex A (normative) - Impact of contamination on measured
quality parameters
Bibliography
This document provides general guidance on automotive fuel handling. It does not pre-empt national or local regulations. It only addresses the issue of cross contamination between petrol and diesel automotive fuels that may occur in the supply chain, during manufacturing, storage, transportation or distribution. There may also be a risk of contamination with other products such as kerosene/jet fuel and off road diesel. The guidance principles described in this document would apply equally to managing these risks although some details may be different.
Committee |
CEN/TC 19
|
DocumentType |
Technical Report
|
PublisherName |
Comite Europeen de Normalisation
|
Status |
Current
|
Standards | Relationship |
PKN CEN/TR 15367-3 : 2011 | Identical |
DIN-Fachbericht CEN/TR 15367-3:2009-04 | Identical |
PD CEN/TR 15367-3:2009 | Identical |
SIS-CEN/TR 15367-3:2009 | Identical |
I.S. CEN TR 15367-3:2009 | Identical |
UNI CEN/TR 15367-3 : 2009 | Identical |
NEN NPR CEN/TR 15367-3 : 2009 | Identical |
S.R. CEN TS 15293:2011 | AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
PD CEN/TR 16680:2014 | Liquid petroleum products. Investigation on internal diesel injector sticking deposits mechanisms and the impacts of corrosion inhibitors |
DD CEN/TS 15293:2011 | Automotive fuels. Ethanol (E85) automotive fuel. Requirements and test methods |
EN 16734:2016 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
BS EN 16709 : 2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
I.S. EN 228:2017 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
DIN EN 228:2004-03 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
09/30206692 DC : 0 | BS EN 228 - AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
I.S. EN 16709:2015 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
UNE-EN 16734:2017 | Automotive fuels - Automotive B10 diesel fuel - Requirements and test methods |
UNE-EN 16709:2016 | Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods |
14/30298209 DC : 0 | BS EN 16734 - AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
S.R. CEN/TR 16680:2014 | LIQUID PETROLEUM PRODUCTS - INVESTIGATION ON INTERNAL DIESEL INJECTOR STICKING DEPOSITS MECHANISMS AND THE IMPACTS OF CORROSION INHIBITORS |
PREN 590 : DRAFT 2011 | AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
I.S. EN 16734:2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
PREN 15293 : DRAFT 2016 | AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
DIN EN 228:2017-08 | Automotive fuels - Unleaded petrol - Requirements and test methods; German version EN 228:2012+A1:2017 |
14/30294041 DC : 0 | BS EN 16709 - AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 OR B30) - REQUIREMENTS AND TEST METHODS |
PREN 228 : DRAFT 2009 | AUTOMOTIVE FUELS - UNLEADED PETROL - REQUIREMENTS AND TEST METHODS |
S.R. CEN/TR 16514:2013 | AUTOMOTIVE FUELS - UNLEADED PETROL CONTAINING MORE THAN 3,7% (M/M) OXYGEN - ROADMAP, TEST METHODS, AND REQUIREMENTS FOR E10+ PETROL |
16/30336428 DC : 0 | BS EN 15293 - AUTOMOTIVE FUELS - ETHANOL (E85) AUTOMOTIVE FUEL - REQUIREMENTS AND TEST METHODS |
EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
BS EN 16734 : 2016 | AUTOMOTIVE FUELS - AUTOMOTIVE B10 DIESEL FUEL - REQUIREMENTS AND TEST METHODS |
PD CEN/TR 16514:2013 | Automotive fuels. Unleaded petrol containing more than 3,7 % (m/m) oxygen. Roadmap, test methods, and requirements for E10+ petrol |
11/30249539 DC : 0 | BS EN 590 - AUTOMOTIVE FUELS - DIESEL - REQUIREMENTS AND TEST METHODS |
DIN EN 590:2017-10 | Automotive fuels - Diesel - Requirements and test methods (includes Amendment :2017) |
CEN/TR 16680:2014 | Liquid petroleum products - Investigation on internal diesel injector sticking deposits mechanisms and the impacts of corrosion inhibitors |
DIN EN 16709:2015-12 | AUTOMOTIVE FUELS - HIGH FAME DIESEL FUEL (B20 AND B30) - REQUIREMENTS AND TEST METHODS |
UNE-EN 590:2014 | Automotive fuels - Diesel - Requirements and test methods |
CEN/TS 15293:2011 | Automotive fuels - Ethanol (E85) automotive fuel - Requirements and test methods |
CEN/TR 16514:2013 | Automotive fuels - Unleaded petrol containing more than 3,7 % (m/m) oxygen - Roadmap, test methods, and requirements for E10+ petrol |
UNE-EN 228:2013 | Automotive fuels - Unleaded petrol - Requirements and test methods |
ISO 3171:1988 | Petroleum liquids — Automatic pipeline sampling |
ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
EN 14275:2013 | Automotive fuels - Assessment of petrol and diesel fuel quality - Sampling from retail site pumps and commercial site fuel dispensers |
EN 228:2012+A1:2017 | Automotive fuels - Unleaded petrol - Requirements and test methods |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
EN ISO 3104:1996 | Petroleum products - Transparent and opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity (ISO 3104:1994) |
CEN/TR 15367-2:2007 | Petroleum products - Guide for good housekeeping - Part 2: Automotive petrol fuels |
EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
EN 15376:2014 | Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods |
EN ISO 3405:2011 | Petroleum products - Determination of distillation characteristics at atmospheric pressure (ISO 3405:2011) |
CEN/TR 15367-1:2014 | Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels |
EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
ISO 9001:2015 | Quality management systems — Requirements |
EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
ISO 3405:2011 | Petroleum products Determination of distillation characteristics at atmospheric pressure |
ISO 20846:2011 | Petroleum products Determination of sulfur content of automotive fuels Ultraviolet fluorescence method |
EN ISO 20846:2011 | Petroleum products - Determination of sulfur content of automotive fuels - Ultraviolet fluorescence method (ISO 20846:2011) |
EN ISO 3170:2004 | Petroleum liquids - Manual sampling (ISO 3170:2004) |
EN ISO 3171:1999 | Petroleum liquids - Automatic pipeline sampling (ISO 3171:1988) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.