CAN/CSA-ISO/IEC 18046-1:13 (R2017)
Current
The latest, up-to-date edition.
Information technology - Radio frequency identification device performance test methods - Part 1: Test methods for system performance (Adopted ISO/IEC 18046-1:2011, first edition, 2011-10-15)
Hardcopy , PDF
English
01-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Abbreviated terms
5 Conditions applicable to the test methods
6 Inductive systems
7 Propagative system according ISO/IEC 18000-6
8 Propagative System according ISO/IEC 18000-7
Annex A (Normative) - Table of general parameters for
the test report
Bibliography
Specifies test methods for performance characteristics of RFID systems for item management, and specifies the general requirements and test requirements for systems which are applicable to the selection of devices for an application.
| DevelopmentNote |
Supersedes CSA ISO/IEC 18046. (01/2013)
|
| DocumentType |
Standard
|
| ISBN |
978-1-77139-066-8
|
| Pages |
86
|
| ProductNote |
Reconfirmed EN
|
| PublisherName |
Canadian Standards Association
|
| Status |
Current
|
| Supersedes |
Preface Standards development within the Information Technology sector is harmonized with international standards development. Through the CSA Technical Committee on Information Technology (TCIT), Canadians serve as the Canadian Advisory Committee (CAC) on ISO/IEC Joint Technical Committee 1 on Information Technology (ISO/IEC JTC1) for the Standards Council of Canada (SCC), the ISO member body for Canada and sponsor of the Canadian National Committee of the IEC. Also, as a member of the International Telecommunication Union (ITU), Canada participates in the International Telegraph and Telephone Consultative Committee (ITU-T). This Standard replaces CAN/CSA-ISO/IEC 18046-08 (adoption of ISO/IEC 18046:2006). At the time of publication, ISO/IEC 18046-1:2011 is available from ISO and IEC in English only. Scope This part of ISO/IEC 18046 defines test methods for performance characteristics of RFID systems for item management, and specifies the general requirements and test requirements for systems which are applicable to the selection of devices for an application. It does not apply to testing in relation to regulatory or similar requirements.
| Standards | Relationship |
| ISO/IEC 18046-1:2011 | Identical |
| ISO 2859-4:2002 | Sampling procedures for inspection by attributes Part 4: Procedures for assessment of declared quality levels |
| ISO/IEC TR 18047-4:2004 | Information technology Radio frequency identification device conformance test methods Part 4: Test methods for air interface communications at 2,45 GHz |
| ISO/IEC TR 18047-7:2010 | Information technology Radio frequency identification device conformance test methods Part 7: Test methods for active air interface communications at 433 MHz |
| ISO/IEC 19762-3:2008 | Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 3: Radio frequency identification (RFID) |
| ISO/IEC TR 18047-3:2011 | Information technology Radio frequency identification device conformance test methods Part 3: Test methods for air interface communications at 13,56 MHz |
| ISO/IEC 18000-6:2013 | Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General |
| EN 300 220-3 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT TO BE USED IN THE 25 MHZ TO 1 000 MHZ FREQUENCY RANGE WITH POWER LEVELS RANGING UP TO 500 MW; PART 3: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| ISO/IEC 18000-7:2014 | Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz |
| ETSI EN 300 440 V2.1.1:2017-03 | Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
| ISO/IEC 18000-2:2009 | Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz |
| ISO 2859-10:2006 | Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| ISO/IEC 18000-4:2015 | Information technology Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHz |
| EN 300 220-2 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1 000 MHZ - PART 2: HARMONISED STANDARD FOR ACCESS TO RADIO SPECTRUM FOR NON SPECIFIC RADIO EQUIPMENT |
| ISO/IEC TR 18047-6:2011 | Information technology Radio frequency identification device conformance test methods Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
| EN 302 208-2 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| EN 300 220-1 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
| EN 300 330 : 1.2.2 | SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT IN THE FREQUENCY RANGE 9 KHZ TO 25 MHZ AND INDUCTIVE LOOP SYSTEMS IN THE FREQUENCY RANGE 9 KHZ TO 30 MHZ; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU |
| ISO/IEC 18000-1:2008 | Information technology Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized |
| EN 302 208-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 1: TECHNICAL REQUIREMENTS AND METHODS OF MEASUREMENT |
| ISO/IEC TR 18047-2:2006 | Information technology Radio frequency identification device conformance test methods Part 2: Test methods for air interface communications below 135 kHz |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO/IEC 18000-3:2010 | Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.