CAN/CSA-E60335-2-53-05 (R2018)
Current
The latest, up-to-date edition.
Household and Similar Electrical Appliances - Safety - Part 2-53: Particular Requirements for Sauna Heating Appliances (Adopted CEI/IEC 60335-2-53:2005, third edition, 2002-10) | Appareils électrodomestiques et analogues - Sécurité - Partie 2-53: Règles particulières pour les appareils de chauffage de saunas (norme CEI/IEC 60335-2-53:2005 adoptée, troisième édition, 2002-10)
Hardcopy , PDF
English, English - French
01-01-2005
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Definitions
4 General requirement
5 General conditions for the tests
6 Classification
7 Marking and instructions
8 Protection against access to live parts
9 Starting of motor-operated appliances
10 Power input and current
11 Heating
12 Void
13 Leakage current and electric strength at operating
temperature
14 Transient overvoltages
15 Moisture resistance
16 Leakage current and electric strength
17 Overload protection of transformers and associated circuits
18 Endurance
19 Abnormal operation
20 Stability and mechanical hazards
21 Mechanical strength
22 Construction
23 Internal wiring
24 Components
25 Supply connection and external flexible cords
26 Terminals for external conductors
27 Provision for earthing
28 Screws and connections
29 Clearances, creepage distances and solid insulation
30 Resistance to heat and fire
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
Annexes
Annex AA (normative) - Sauna room for testing sauna heating
appliances
Bibliography
CSA Preface This is the second edition of CAN/CSA-E60335-2-53, Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances, which is an adoption without modification of the identically titled CEI/IEC (Commission Électrotechnique Internationale/International Electrotechnical Commission) Standard 60335-2-53 (third edition, 2002-10). It supersedes the previous edition published in 1994 as CAN/CSA-E335-2-53, Safety of household and similar electrical appliances - Part 2: Particular requirements for electric sauna heating appliances (adopted CEI/IEC 335-2-53:1988). Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric sauna heating appliances having a rated power input not exceeding 20 kW, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 Sauna heating appliances may be of the thermal storage type. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account - the use of appliances by young children or infirm persons without supervision; - playing with the appliance by young children. NOTE 102 Attention is drawn to the fact that - for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; - in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 103 This standard does not apply to - appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); - appliances intended to cause perspiration to only a part of the human body; - sweating baths where the head of the user remains outside the heated space; - tents and other collapsible sauna baths. -------------------------------------------------------------------------------------------------------------------------------- Préface CSA Ce document constitue la deuxième édition de la CAN/CSA-E60335-2-53, Appareils électrodomestiques et analogues - Sécurité - Partie 2-53 : Règles particulières pour les appareils de chauffage de saunas. Il s\'agit de l\'adoption, sans modifications, de la norme CEI/IEC (Commission Électrotechnique Internationale/International Electrotechnical Commission) 60335-2-53 (troisième édition, 2002-10), qui porte le même titre. Cette norme remplace la dernière édition publiée en 1994 qui portait la désignation CAN/CSA-E335-2-53, Sécurité des appareils électrodomestiques et analogues - Partie 2 : Règles particulières pour les appareils de chauffage électriques des saunas (norme CEI/IEC 335-2-53:1988 adoptée). Domaine d\'application L\'article de la Partie 1 est remplacé par l\'article ci-après. La présente Norme internationale traite de la sécurité des appareils de chauffage électriques de saunas dont la puissance assignée n\'est pas supérieure à 20 kW et dont la tension assignée n\'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. NOTE 101 Les appareils de chauffage de saunas peuvent être du type à accumulation. Dans la mesure du possible, la présente norme traite des risques ordinaires présentés par les appareils, encourus par tous les individus à l\'intérieur et autour de l\'habitation. Cependant, cette norme ne tient pas compte en général - de l\'utilisation des appareils par des jeunes enfants ou des personnes handicapées sans surveillance; - de l\'emploi de l\'appareil comme jouet par des jeunes enfants. NOTE 102 L\'attention est attirée sur le fait que - pour les appareils destinés à être utilisés dans des véhicules ou à bord de navires ou d\'avions, des exigences supplémentaires peuvent être nécessaires; - dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux de la santé, par les organismes nationaux responsables de la protection des travailleurs et par des organismes similaires. NOTE 103 La présente norme ne s\'applique pas - aux appareils destinés à être utilisés dans des locaux présentant des conditions particulières, telles que la présence d\'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz); - aux appareils destinés à provoquer la transpiration d\'une partie du corps humain seulement; - aux bains de sudation où la tête de l\'usager reste à l\'extérieur de l\'espace chauffé; - aux tentes saunas et autres saunas pliants.
DevelopmentNote |
Supersedes CSA E335.2.53. (02/2005)
|
DocumentType |
Standard
|
ISBN |
1-55436-296-2
|
Pages |
51
|
ProductNote |
Reconfirmed EN
|
PublisherName |
Canadian Standards Association
|
Status |
Current
|
CSA Preface This is the second edition of CAN/CSA-E60335-2-53, Household and similar electrical appliances - Safety - Part 2-53: Particular requirements for sauna heating appliances, which is an adoption without modification of the identically titled CEI/IEC (Commission Électrotechnique Internationale/International Electrotechnical Commission) Standard 60335-2-53 (third edition, 2002-10). It supersedes the previous edition published in 1994 as CAN/CSA-E335-2-53, Safety of household and similar electrical appliances - Part 2: Particular requirements for electric sauna heating appliances (adopted CEI/IEC 335-2-53:1988). Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric sauna heating appliances having a rated power input not exceeding 20 kW, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. NOTE 101 Sauna heating appliances may be of the thermal storage type. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons in and around the home. However, in general, it does not take into account - the use of appliances by young children or infirm persons without supervision; - playing with the appliance by young children. NOTE 102 Attention is drawn to the fact that - for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; - in many countries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 103 This standard does not apply to - appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); - appliances intended to cause perspiration to only a part of the human body; - sweating baths where the head of the user remains outside the heated space; - tents and other collapsible sauna baths. -------------------------------------------------------------------------------------------------------------------------------- Préface CSA Ce document constitue la deuxième édition de la CAN/CSA-E60335-2-53, Appareils électrodomestiques et analogues - Sécurité - Partie 2-53 : Règles particulières pour les appareils de chauffage de saunas. Il s\'agit de l\'adoption, sans modifications, de la norme CEI/IEC (Commission Électrotechnique Internationale/International Electrotechnical Commission) 60335-2-53 (troisième édition, 2002-10), qui porte le même titre. Cette norme remplace la dernière édition publiée en 1994 qui portait la désignation CAN/CSA-E335-2-53, Sécurité des appareils électrodomestiques et analogues - Partie 2 : Règles particulières pour les appareils de chauffage électriques des saunas (norme CEI/IEC 335-2-53:1988 adoptée). Domaine d\'application L\'article de la Partie 1 est remplacé par l\'article ci-après. La présente Norme internationale traite de la sécurité des appareils de chauffage électriques de saunas dont la puissance assignée n\'est pas supérieure à 20 kW et dont la tension assignée n\'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. NOTE 101 Les appareils de chauffage de saunas peuvent être du type à accumulation. Dans la mesure du possible, la présente norme traite des risques ordinaires présentés par les appareils, encourus par tous les individus à l\'intérieur et autour de l\'habitation. Cependant, cette norme ne tient pas compte en général - de l\'utilisation des appareils par des jeunes enfants ou des personnes handicapées sans surveillance; - de l\'emploi de l\'appareil comme jouet par des jeunes enfants. NOTE 102 L\'attention est attirée sur le fait que - pour les appareils destinés à être utilisés dans des véhicules ou à bord de navires ou d\'avions, des exigences supplémentaires peuvent être nécessaires; - dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux de la santé, par les organismes nationaux responsables de la protection des travailleurs et par des organismes similaires. NOTE 103 La présente norme ne s\'applique pas - aux appareils destinés à être utilisés dans des locaux présentant des conditions particulières, telles que la présence d\'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz); - aux appareils destinés à provoquer la transpiration d\'une partie du corps humain seulement; - aux bains de sudation où la tête de l\'usager reste à l\'extérieur de l\'espace chauffé; - aux tentes saunas et autres saunas pliants.
CISPR 14-1:2016 | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission |
IEC 60112:2003+AMD1:2009 CSV | Method for the determination of the proof and the comparative tracking indices of solid insulating materials |
IEC 60252:1993 | A.C. motor capacitors |
IEC 60320-1:2015 | Appliance couplers for household and similar general purposes - Part 1: General requirements |
IEC 60238:2016+AMD1:2017 CSV | Edison screw lampholders |
IEC 60738-1:2006+AMD1:2009 CSV | Thermistors - Directly heated positive temperature coefficient -Part 1: Generic specification |
IEC 60950:1999 | Safety of information technology equipment |
CISPR 14-2:2015 RLV | Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard |
IEC 60320-2-3:1998+AMD1:2004 CSV | Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0 |
ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
IEC 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
IEC 60695-2-13:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-13: Glowing/hot-wire based test methods- Glow-wire ignition temperature (GWIT) test method for materials |
IEC 60999-1:1999 | Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type clamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0,2 mm2 up to 35 mm2 (included) |
IEC 60249-2-4:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 4: Epoxide woven glass fabric copper-clad laminated sheet, general purpose grade |
IEC 60249-2-5:1987 | Base materials for printed circuits. Part 2: Specifications. Specification No. 5: Epoxide woven glass fabric copper-clad laminated sheet of defined flammability (vertical burning test) |
IEC 60085:2007 | Electrical insulation - Thermal evaluation and designation |
IEC 60051-2:1984 | Direct acting indicating analogue electrical measuring instruments and their accessories. Part 2: Special requirements for ammeters and voltmeters |
IEC 61180-2:1994 | High-voltage test techniques for low-voltage equipment - Part 2: Test equipment |
IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
IEC 60695-2-12:2010+AMD1:2014 CSV | Fire hazard testing - Part 2-12: Glowing/hot-wire based test methods- Glow-wire flammability index (GWFI) test method for materials |
IEC 60998-2-2:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units |
IEC 61643-1:2005 | Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems - Requirements and tests |
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
ISO 9772:2012 | Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
IEC 61058-1:2016 | Switches for appliances - Part 1: General requirements |
IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
IEC 60598-1:2014+AMD1:2017 CSV | Luminaires - Part 1: General requirements and tests |
IEC 60061-1:2005 CSV | Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps |
IEC 60906-1:2009 | IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c. |
IEC 61000-3-3:2013 RLV | Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection |
ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
IEC 60335-2-29:2016 | Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers |
IEC 60068-2-75:2014 | Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests |
IEC 60664-3:2016 | Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
CISPR 11:2015 RLV | Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement |
IEC 60695-10-2:2014 | Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test method |
IEC 61180-1:1992 | High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 60998-2-1:2002 | Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units |
IEC 60990:2016 | Methods of measurement of touch current and protective conductor current |
IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.