BS ISO/IEC 18046-3:2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Information technology. Radio frequency identification device performance test methods Test methods for tag performance
Hardcopy , PDF
28-10-2020
English
31-01-2013
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Conditions applicable to the test methods
6 Setup of test equipment for tag test
7 Functional tests for inductive tags as defined
in ISO/IEC 18000-2 and ISO/IEC 18000-3 and
ISO/IEC 18000-6
8 Functional tests for propagative tags as defined
in ISO/IEC 18000-6
9 Functional tests for 433,920 MHz propagative tags
as defined in ISO/IEC 18000-7
Annex A (informative) - Resonant frequency and Q factor
measurement for inductive tag
Annex B (normative) - Test apparatus modification for
ISO/IEC 18000-3 compliant tags for field
strengths > 5 A/m
Annex C (normative) - Test apparatus modification for
ISO/IEC 18000-6 compliant tags
Annex D (informative) - Inventory command for all parts
of ISO/IEC 18000
Bibliography
Specifies test methods for performance characteristics of (RFID) tags for item management, and specifies the general requirements and test requirements for tags which are applicable to the selection of the devices for an application.
Committee |
IST/34
|
DevelopmentNote |
2007 Edition was issued on 30/06/2011. (06/2011) Together with BS ISO/IEC 18046-1 and BS ISO/IEC 18046-2, it supersedes BS ISO/IEC 18046. (10/2011) Supersedes 12/30257199 DC. (01/2013)
|
DocumentType |
Standard
|
Pages |
66
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
ISO/IEC 18046-3:2012 | Identical |
ISO/IEC 15962:2013 | Information technology Radio frequency identification (RFID) for item management Data protocol: data encoding rules and logical memory functions |
ISO/IEC TR 18047-4:2004 | Information technology Radio frequency identification device conformance test methods Part 4: Test methods for air interface communications at 2,45 GHz |
ISO/IEC TR 18047-7:2010 | Information technology Radio frequency identification device conformance test methods Part 7: Test methods for active air interface communications at 433 MHz |
ISO/IEC TR 18047-3:2011 | Information technology Radio frequency identification device conformance test methods Part 3: Test methods for air interface communications at 13,56 MHz |
ISO/IEC 18047-2:2012 | Information technology — Radio frequency identification device conformance test methods — Part 2: Test methods for air interface communications below 135 kHz |
ISO/IEC 18000-6:2013 | Information technology — Radio frequency identification for item management — Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General |
ISO/IEC 15963:2009 | Information technology Radio frequency identification for item management Unique identification for RF tags |
ISO/IEC 15961:2004 | Information technology Radio frequency identification (RFID) for item management Data protocol: application interface |
EN 300 220-3 : 1.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT TO BE USED IN THE 25 MHZ TO 1 000 MHZ FREQUENCY RANGE WITH POWER LEVELS RANGING UP TO 500 MW; PART 3: HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
ISO/IEC 18000-7:2014 | Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz |
ETSI EN 300 440 V2.1.1:2017-03 | Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU |
ISO/IEC 18000-2:2009 | Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz |
EN 300 220-2 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1 000 MHZ - PART 2: HARMONISED STANDARD FOR ACCESS TO RADIO SPECTRUM FOR NON SPECIFIC RADIO EQUIPMENT |
ISO/IEC TR 18047-6:2011 | Information technology Radio frequency identification device conformance test methods Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
EN 302 208-2 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
EN 300 220-1 : 2.4.1 | SHORT RANGE DEVICES (SRD) OPERATING IN THE FREQUENCY RANGE 25 MHZ TO 1000 MHZ; PART 1: TECHNICAL CHARACTERISTICS AND METHODS OF MEASUREMENT |
EN 300 330 : 1.2.2 | SHORT RANGE DEVICES (SRD); RADIO EQUIPMENT IN THE FREQUENCY RANGE 9 KHZ TO 25 MHZ AND INDUCTIVE LOOP SYSTEMS IN THE FREQUENCY RANGE 9 KHZ TO 30 MHZ; HARMONISED STANDARD COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF DIRECTIVE 2014/53/EU |
ISO/IEC 18000-1:2008 | Information technology Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized |
EN 302 208-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 1: TECHNICAL REQUIREMENTS AND METHODS OF MEASUREMENT |
ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
ISO/IEC 18000-3:2010 | Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.