BS ISO/IEC 18000-62:2012
Current
The latest, up-to-date edition.
Information technology. Radio frequency identification for item management Parameters for air interface communications at 860 MHz to 960 MHz Type B
Hardcopy , PDF
English
28-02-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Conformance
3 Normative references
4 Terms, definitions, symbols and abbreviated terms
5 Overview
6 Type B
Annex A (informative) - Calculation of 16-bit cyclic
redundancy checks
Annex B (normative) - Memory mapping
Annex C (informative) - Tag memory map
Bibliography
Describes the air interface for radio frequency identification (RFID) devices operating in the 860 MHz to 960 MHz Industrial, Scientific, and Medical (ISM) band used in item management applications.
| Committee |
IST/34
|
| DevelopmentNote |
Together with BS ISO/IEC 18000-6:2013, BS ISO/IEC 18000-61, BS ISO/IEC 18000-63 & BS ISO/IEC 18000-64, it supersedes BS ISO/IEC 18000-6:2010. Supersedes 11/30246363 DC. (03/2013)
|
| DocumentType |
Standard
|
| Pages |
80
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of ISO/IEC18000 defines the air interface for radio frequency identification (RFID) devices operating in the 860MHz to 960MHz Industrial, Scientific, and Medical (ISM) band used in item management applications. It provides a common technical specification for RFID devices that can be used by ISO committees developing RFID application standards. This part of ISO/IEC18000 is intended to allow for compatibility and to encourage inter-operability of products for the growing RFID market in the international marketplace. It defines the forward and return link parameters for technical attributes including, but not limited to, operating frequency, operating channel accuracy, occupied channel bandwidth, maximum effective isotropic radiated power (EIRP), spurious emissions, modulation, duty cycle, data coding, bit rate, bit rate accuracy, bit transmission order, and, where appropriate, operating channels, frequency hop rate, hop sequence, spreading sequence, and chip rate. It further defines the communications protocol used in the air interface.
This part of ISO/IEC18000 specifies the physical and logical requirements for a passive-backscatter, Interrogator-Talks-First (ITF) systems. The system comprises Interrogators, also known as readers, and tags, also known as labels. An Interrogator receives information from a tag by transmitting a continuous-wave (CW) RF signal to the tag; the tag responds by modulating the reflection coefficient of its antenna, thereby backscattering an information signal to the Interrogator. The system is ITF, meaning that a tag modulates its antenna reflection coefficient with an information signal only after being directed to do so by an Interrogator.
In detail, this part of ISO/IEC18000 contains TypeB.
TypeB uses Manchester in the forward link and an adaptive binary-tree collision-arbitration algorithm.
This part of ISO/IEC18000 specifies
-
physical interactions (the signalling layer of the communication link) between Interrogators and tags,
-
Interrogator and tag operating procedures and commands,
-
the collision arbitration scheme used to identify a specific tag in a multiple-tag environment.
| Standards | Relationship |
| ISO/IEC 18000-62:2012 | Identical |
| ISO/IEC 15962:2013 | Information technology Radio frequency identification (RFID) for item management Data protocol: data encoding rules and logical memory functions |
| ISO/IEC 7816-6:2016 | Identification cards — Integrated circuit cards — Part 6: Interindustry data elements for interchange |
| ISO/IEC 15961:2004 | Information technology Radio frequency identification (RFID) for item management Data protocol: application interface |
| ISO/IEC 18000-7:2014 | Information technology Radio frequency identification for item management Part 7: Parameters for active air interface communications at 433 MHz |
| CFR 47(PTS0-19) : OCT 2017 | TELECOMMUNICATION - FEDERAL COMMUNICATIONS COMMISSION |
| ISO/IEC 18000-2:2009 | Information technology — Radio frequency identification for item management — Part 2: Parameters for air interface communications below 135 kHz |
| ISO/IEC 18000-4:2015 | Information technology Radio frequency identification for item management Part 4: Parameters for air interface communications at 2,45 GHz |
| ISO/IEC 18046-3:2012 | Information technology Radio frequency identification device performance test methods Part 3: Test methods for tag performance |
| ISO/IEC TR 18047-6:2011 | Information technology Radio frequency identification device conformance test methods Part 6: Test methods for air interface communications at 860 MHz to 960 MHz |
| EN 302 208-2 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 2: HARMONIZED EN COVERING THE ESSENTIAL REQUIREMENTS OF ARTICLE 3.2 OF THE R&TTE DIRECTIVE |
| ISO/IEC 18000-1:2008 | Information technology Radio frequency identification for item management Part 1: Reference architecture and definition of parameters to be standardized |
| EN 302 208-1 : 2.1.1 | ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM MATTERS (ERM); RADIO FREQUENCY IDENTIFICATION EQUIPMENT OPERATING IN THE BAND 865 MHZ TO 868 MHZ WITH POWER LEVELS UP TO 2 W AND IN THE BAND 915 MHZ TO 921 MHZ WITH POWER LEVELS UP TO 4 W; PART 1: TECHNICAL REQUIREMENTS AND METHODS OF MEASUREMENT |
| ISO/IEC 18000-3:2010 | Information technology — Radio frequency identification for item management — Part 3: Parameters for air interface communications at 13,56 MHz |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.