BS ISO 8068:2006
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Lubricants, industrial oils and related products (class L). Family T (turbines). Specification for lubricating oils for turbines
Available format(s)
Hardcopy , PDF
Superseded date
12-10-2019
Superseded by
Language(s)
English
Published date
29-12-2006
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Sampling
4 Requirements for turbine oils
5 Specification tables
Bibliography
Describes the minimum requirements for turbine lubricants, as delivered. It specifies the requirements for a wide variety of turbines for power generation, including steam turbines, gas turbines, combined-cycle turbines with a common lubrication system and hydraulic (water driven) turbines.
| Committee |
PTI/7
|
| DevelopmentNote |
Supersedes 05/30098184 DC (12/2006)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 8068:2006 | Identical |
| ISO 6743-5:2006 | Lubricants, industrial oils and related products (class L) Classification Part 5: Family T (Turbines) |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| ISO 20764:2003 | Petroleum and related products — Preparation of a test portion of high-boiling liquids for the determination of water content — Nitrogen purge method |
| ISO 14593:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Method by analysis of inorganic carbon in sealed vessels (CO2 headspace test) |
| ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
| ISO 9439:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test |
| ISO 3170:2004 | Petroleum liquids — Manual sampling |
| ISO 4263-3:2015 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| ISO 13357-1:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water |
| ISO 14635-1:2000 | Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
| MIL-PRF-7808 Revision L:1997 | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
| ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
| ISO 6743-6:1990 | Lubricants, industrial oils and related products (class L) Classification Part 6: Family C (Gears) |
| ISO 7624:1997 | Petroleum products and lubricants — Inhibited mineral turbine oils — Determination of oxidation stability |
| ISO 6341:2012 | Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) — Acute toxicity test |
| ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
| ISO 7537:1997 | Petroleum products — Determination of acid number — Semi-micro colour-indicator titration method |
| ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
| ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
| ISO 4263-1:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils |
| ASTM D 4636 : 2017 : REDLINE | Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils |
| ISO 15380:2016 | Lubricants, industrial oils and related products (class L) — Family H (Hydraulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR |
| ISO 13357-2:2017 | Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| DIN 51554-3:1978-09 | TESTING OF MINERAL OILS; TEST OF SUSCEPTIBILITY TO AGEING ACCORDING TO BAADER; TESTING AT 95 DEGREE C |
| ISO 20823:2003 | Petroleum and related products Determination of the flammability characteristics of fluids in contact with hot surfaces Manifold ignition test |
| ISO 6296:2000 | Petroleum products Determination of water Potentiometric Karl Fischer titration method |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
| EN 14832:2005 | Petroleum and related products - Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids |
| EN 14833:2005 | Petroleum and related products - Determination of the hydrolytic stability of fire-resistant phosphate ester fluids |
| ASTM D 2711 : 2017 : REDLINE | Standard Test Method for Demulsibility Characteristics of Lubricating Oils |
| ISO 12925-1:1996 | Lubricants, industrial oils and related products (class L) Family C (Gears) Part 1: Specifications for lubricants for enclosed gear systems |
| ISO 8192:2007 | Water quality Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation |
| ISO 2049:1996 | Petroleum products Determination of colour (ASTM scale) |
| ISO 2909:2002 | Petroleum products Calculation of viscosity index from kinematic viscosity |
| ISO 14935:1998 | Petroleum and related products Determination of wick flame persistence of fire-resistant fluids |
| ISO 6619:1988 | Petroleum products and lubricants — Neutralization number — Potentiometric titration method |
| ISO 7346-2:1996 | Water quality Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] Part 2: Semi-static method |
| ISO 760:1978 | Determination of water Karl Fischer method (General method) |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.