BS ISO 3977-3:2004
Current
The latest, up-to-date edition.
Gas turbines. Procurement Design requirements
Hardcopy , PDF
English
31-07-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Basic requirements
4.1 General
4.2 Site-specific conditions
4.3 Operational requirements
4.4 Service requirements
4.5 Rotating equipment requirements
4.6 Other equipment requirements
4.7 Vibrations and dynamics
5 Packaging and auxiliary equipment
5.1 Basic design
5.2 Auxiliary equipment
6 Control and instrumentation
6.1 Control systems
6.2 Starting
6.3 Loading
6.4 Unloading and shutdown
6.5 Ventilation and purging
6.6 Fuel control
6.7 Governing and limiting
6.8 Emission control
6.9 Overspeed protection
6.10 Protection systems
6.11 Compressor wash system
6.12 Control system considerations
6.13 Control panel installation
6.14 Operability and diagnostics
6.15 Data communications
6.16 Special applications
Annex A (informative) - Data sheets
Annex B (informative) - List of national or International
Standards applicable in context
Bibliography
Provides the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager.
| Committee |
MCE/16
|
| DevelopmentNote |
Issue date: 31/07/2008. Supersedes 03/314833 DC. (08/2008)
|
| DocumentType |
Standard
|
| Pages |
72
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of ISO 3977 covers the design requirements for the procurement of all applications of gas turbines and gas turbine systems, including gas turbines for combined cycle systems and their auxiliaries, by a purchaser from a packager. It also provides assistance and technical information to be used in the procurement.
It is not intended to deal with local or national legislative requirements with which the installation may be required to conform.
This part of ISO 3977 is applicable to simple-cycle, combined-cycle and regenerative-cycle gas turbines working in open systems. It is not applicable to gas turbines used to propel aircraft, road construction and earth moving machines, agricultural and industrial types of tractors and road vehicles.
In cases of gas turbines using special heat sources (for example, chemical process, nuclear reactors, furnace for a super-charged boiler), this part of ISO 3977 provides a basis.
The relevant parts of ISO 3977 are applicable to closed and semi-closed systems.
NOTE Additional requirements for special gas turbine applications are described in ISO 3977-5.
| Standards | Relationship |
| ISO 3977-3:2004 | Identical |
| ISO 10816-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 4: Gas turbine sets with fluid-film bearings |
| DIN 2547:1977-09 | CAST STEEL FLANGES - NOMINAL PRESSURE 100 |
| ISO 3977-4:2002 | Gas turbines — Procurement — Part 4: Fuels and environment |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| BS 4807:1991 | Recommendation for centralized lubrication systems |
| ISO 3977-2:1997 | Gas turbines — Procurement — Part 2: Standard reference conditions and ratings |
| ISO 10442:2002 | Petroleum, chemical and gas service industries Packaged, integrally geared centrifugal air compressors |
| API 616 : 2011 | GAS TURBINES FOR THE PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ASME B31.1 : 2016 | POWER PIPING |
| ISO 7919-4:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 4: Gas turbine sets with fluid-film bearings |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ISO 3977-1:1997 | Gas turbines — Procurement — Part 1: General introduction and definitions |
| ISO 3977-7:2002 | Gas turbines Procurement Part 7: Technical information |
| ISO 10816-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| ISO 11086:1996 | Gas turbines — Vocabulary |
| ISO 7919-2:2009 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min |
| ISO 10814:1996 | Mechanical vibration Susceptibility and sensitivity of machines to unbalance |
| NFE 29 204 : 2008 | INDUSTRIAL PIPEWORKS - FORGED STEEL FLANGES AND COLLARS - MATERIALS - MECHANICAL PROPERTIES - FABRICATION - TESTS |
| API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| ISO 7919-1:1996 | Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines |
| ASME B16.11 : 2016 | FORGED FITTINGS, SOCKET-WELDING AND THREADED |
| DIN 2551:1969-04 | CAST STEEL FLANGES, NOMINAL PRESSURE 400 |
| ISO 3977-9:1999 | Gas turbines — Procurement — Part 9: Reliability, availability, maintainability and safety |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| NFE 29 600 : 1987 | INDUSTRIAL PIPEWORK - STEEL FITTINGS AND PLUGS - SOCKET WELDING FITTINGS |
| ISO 10438-3:2007 | Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 3: General-purpose oil systems |
| ISO 3977-5:2001 | Gas turbines Procurement Part 5: Applications for petroleum and natural gas industries |
| DIN 2545:1977-09 | CAST STEEL FLANGES - NOMINAL PRESSURE 40 |
| DIN 2550:1969-04 | CAST STEEL FLANGES, NOMINAL PRESSURE 320 |
| DIN 24425:1991-07 (Draft) | OIL (SUPPLY) SYSTEMS - DESCRIPTION, SELECTION, REQUIREMENTS CLASSES |
| NFE 29 203 : 1989 | INDUSTRIAL PIPEWORK - CARBON, ALLOY AND AUSTENITIC STAINLESS STEEL FLANGES AND FLANGED FITTINGS - TERMINOLOGY - DIMENSIONS |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| ISO 11042-1:1996 | Gas turbines — Exhaust gas emission — Part 1: Measurement and evaluation |
| ISO 11042-2:1996 | Gas turbines — Exhaust gas emission — Part 2: Automated emission monitoring |
| ISO 3977-8:2002 | Gas turbines — Procurement — Part 8: Inspection, testing, installation and commissioning |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| ISO 10816-1:1995 | Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines |
| BS 1600:1991 | Specification for dimensions of steel pipe for the petroleum industry |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| DIN 2543:1977-09 | CAST STEEL FLANGES - NOMINAL PRESSURE 16 |
| BS EN 288-3:1992 | Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of steels |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements |
| DIN 2546:1969-11 | CAST STEEL FLANGES - NOMINAL PRESSURE 64 |
| DIN 2549:1969-04 | CAST STEEL FLANGES, NOMINAL PRESSURE 250 |
| ISO 13709:2009 | Centrifugal pumps for petroleum, petrochemical and natural gas industries |
| ISO 10438-4:2007 | Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 4: Self-acting gas seal support systems |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| ISO 10441:2007 | Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications |
| DIN 2548:1969-04 | CAST STEEL FLANGES, NOMINAL PRESSURE 160 |
| ISO 1940-2:1997 | Mechanical vibration Balance quality requirements of rigid rotors Part 2: Balance errors |
| BS 4504-3.3:1989 | Circular flanges for pipes, valves and fittings (PN designated) Specification for copper alloy and composite flanges |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 10494:1993 | Gas turbines and gas turbine sets Measurement of emitted airborne noise Engineering/survey method |
| AGMA 420 : LATEST | PRACTICE FOR ENCLOSED SPEED REDUCERS OR INCREASERS USING SPUR, HELICAL, HERRINGBONE AND SPIRAL BEVEL GEARS |
| ISO 10438-2:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 2: Special-purpose oil systems |
| DIN 2544:1977-09 | CAST STEEL FLANGES - NOMINAL PRESSURE 25 |
| ISO 10439:2002 | Petroleum, chemical and gas service industries Centrifugal compressors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.