BS ISO 20297-1:2017
Current
Current
The latest, up-to-date edition.
Industrial trucks. Lorry-mounted trucks Safety requirements and verification
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
11-01-2018
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
MHE/7
|
| DevelopmentNote |
Supersedes 16/30333438 DC. (01/2018)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This document specifies safety requirements and their verification for industrial and rough-terrain lorry‑mounted trucks (hereafter referred to as “trucks”).
It is applicable to those trucks capable of self-loading onto a carrier vehicle. It is not applicable to
trucks that are driven onto the carrier vehicle, or
trucks that are loaded onto the carrier vehicle with the assistance of external means, i.e. crane or other lifting device.
This document deals with all significant hazards, hazardous situations or hazardous events relevant to machinery, when it is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer. The significant hazards covered by this document are listed in AnnexA.
This document does not address hazards which can occur
during manufacture,
when handling suspended loads, which may swing freely,
when using trucks on public roads,
when operating in potentially explosive atmospheres,
with a battery or hybrid as the primary power source.
It does not address the requirements of road safety when the truck is mounted on the carrier vehicle.
It is not applicable to trucks manufactured before the date of its publication.
| Standards | Relationship |
| ISO 20297-1:2017 | Identical |
| ISO 3449:2005 | Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements |
| ISO 10532:1995 | Earth-moving machinery Machine-mounted retrieval device Performance requirements |
| ISO 3164:2013 | Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume |
| ISO 10263-5:2009 | Earth-moving machinery Operator enclosure environment Part 5: Windscreen defrosting system test method |
| ISO/TS 3691-8:2012 | Industrial trucks Safety requirements and verification Part 8: Regional requirements for countries outside the European Community |
| ISO 11525-1:2012 | Rough-terrain trucks - User requirements Part 1: General requirements |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 15817:2012 | Earth-moving machinery — Safety requirements for remote operator control systems |
| ISO 3691-2:2016 | Industrial trucks — Safety requirements and verification — Part 2: Self-propelled variable-reach trucks |
| ISO 3411:2007 | Earth-moving machinery Physical dimensions of operators and minimum operator space envelope |
| ISO 6683:2005 | Earth-moving machinery Seat belts and seat belt anchorages Performance requirements and tests |
| ISO 6405-2:2017 | Earth-moving machinery Symbols for operator controls and other displays Part 2: Symbols for specific machines, equipment and accessories |
| ISO 22915-20:2008 | Industrial trucks — Verification of stability — Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| ISO 5353:1995 | Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point |
| ISO 12508:1994 | Earth-moving machinery Operator station and maintenance areas Bluntness of edges |
| ISO 13564-1:2012 | Powered industrial trucks — Test methods for verification of visibility — Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity |
| ISO 3691-1:2011 | Industrial trucks — Safety requirements and verification — Part 1: Self-propelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks |
| ISO 22915-10:2008 | Industrial trucks — Verification of stability — Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices |
| ISO 22915-3:2014 | Industrial trucks Verification of stability Part 3: Reach and straddle trucks |
| ISO 5010:2007 | Earth-moving machinery Rubber-tyred machines Steering requirements |
| ISO 21507:2010 | Earth-moving machinery Performance requirements for non-metallic fuel tanks |
| ISO 12509:2004 | Earth-moving machinery — Lighting, signalling and marking lights, and reflex-reflector devices |
| ISO 10896-1:2012 | Rough-terrain trucks Safety requirements and verification Part 1: Variable-reach trucks |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 22915-14:2010 | Industrial trucks Verification of stability Part 14: Rough-terrain variable-reach trucks |
| ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
| ISO 9244:2008 | Earth-moving machinery Machine safety labels General principles |
| ISO 10263-3:2009 | Earth-moving machinery Operator enclosure environment Part 3: Pressurization test method |
| ISO 3471:2008 | Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements |
| ISO 15818:2017 | Earth-moving machinery Lifting and tying-down attachment points Performance requirements |
| ISO 2860:1992 | Earth-moving machinery — Minimum access dimensions |
| ISO 3287:1999 | Powered industrial trucks — Symbols for operator controls and other displays |
| ISO 15870:2000 | Powered industrial trucks — Safety signs and hazard pictorials — General principles |
| ISO 2331:1974 | Fork lift trucks Hook-on type fork arms Vocabulary |
| ISO 3767-1:2016 | Tractors, machinery for agriculture and forestry, powered lawn and garden equipment Symbols for operator controls and other displays Part 1: Common symbols |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ISO 2328:2011 | Fork-lift trucks — Hook-on type fork arms and fork arm carriages — Mounting dimensions |
| ISO 21281:2005 | Construction and layout of pedals of self-propelled sit-down rider-controlled industrial trucks Rules for the construction and layout of pedals |
| ISO 6405-1:2017 | Earth-moving machinery Symbols for operator controls and other displays Part 1: Common symbols |
| ISO 3457:2003 | Earth-moving machinery — Guards — Definitions and requirements |
| ISO 22915-7:2016 | Industrial trucks Verification of stability Part 7: Bidirectional and multidirectional trucks |
| ISO 6292:2008 | Powered industrial trucks and tractors Brake performance and component strength |
| ISO 10263-4:2009 | Earth-moving machinery Operator enclosure environment Part 4: Heating, ventilating and air conditioning (HVAC) test method and performance |
| ISO 2330:2002 | Fork-lift trucks — Fork arms — Technical characteristics and testing |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO/TS 3691-7:2011 | Industrial trucks — Safety requirements and verification — Part 7: Regional requirements for countries within the European Community |
| ISO 2867:2011 | Earth-moving machinery Access systems |
| ISO 9533:2010 | Earth-moving machinery Machine-mounted audible travel alarms and forward horns Test methods and performance criteria |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 22915-13:2012 | Industrial trucks — Verification of stability — Part 13: Rough-terrain trucks with mast |
| ISO 10968:2004 | Earth-moving machinery Operator's controls |
| ISO 5053-1:2015 | Industrial trucks Terminology and classification Part 1: Types of industrial trucks |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.