BS ISO 16111:2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Transportable gas storage devices. Hydrogen absorbed in reversible metal hydride
Hardcopy , PDF
08-09-2018
English
31-03-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Service conditions
5 Design considerations
6 Inspection and testing
7 Marking, labelling, and documentation
8 Documentation accompanying the product
Annex A (informative) - Material compatibility for hydrogen
service
Annex B (normative) - Environmental tests
Annex C (informative) - Type approval certificate
Annex D (informative) - Acceptance certificate
Bibliography
Describes the requirements applicable to the material, design, construction, and testing of transportable hydrogen gas storage systems, referred to as 'metal hydride assemblies' (MH assemblies) which utilize shells not exceeding 150 l internal volume and having a maximum developed pressure (MDP) not exceeding 25 MPa (250 bar).
| Committee |
PVE/3/3
|
| DevelopmentNote |
Supersedes 07/30148170 DC. (03/2009)
|
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This International Standard defines the requirements applicable to the material, design, construction, and testing of transportable hydrogen gas storage systems, referred to as “metal hydride assemblies” (MH assemblies) which utilize shells not exceeding 150 l internal volume and having a maximum developed pressure (MDP) not exceeding 25 MPa (250 bar). This International Standard only applies to refillable storage MH assemblies where hydrogen is the only transferred media. Storage MH assemblies intended to be used as fixed fuel-storage onboard hydrogen fuelled vehicles are excluded. This International Standard is intended to be used for certification purposes.
| Standards | Relationship |
| ISO 16111:2008 | Identical |
| ISO 7225:2005 | Gas cylinders — Precautionary labels |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| ISO 11119-2:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 2: Fully wrapped fibre reinforced composite gas cylinders and tubes up to 450 l with load-sharing metal liners |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ASME B31.1 : 2016 | POWER PIPING |
| ISO 9809-3:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
| ASTM G 146 : 2001 | Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service |
| ISO 9587:2007 | Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| NACE TM 02 84 : 2016 | EVALUATION OF PIPELINE AND PRESSURE VESSEL STEELS FOR RESISTANCE TO HYDROGEN-INDUCED CRACKING |
| ASTM B 57 : LATEST | SPECIFICATION FOR COPPER-ALLOY CONDENSER TUBE PLATES |
| NACE TM 01 77 : 2016 | LABORATORY TESTING OF METALS FOR RESISTANCE TO SULFIDE STRESS CRACKING AND STRESS CORROSION CRACKING IN H[2]S ENVIRONMENTS |
| ASME B31.3:2016 | PROCESS PIPING |
| ISO 14246:2014 | Gas cylinders Cylinder valves Manufacturing tests and examinations |
| ISO 15330:1999 | Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method |
| ISO 15724:2001 | Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| AWS A4.3 : 1993 | DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF MARTENSITIC, BAINITIC, AND FERRITIC STEEL WELD METAL PRODUCED BY ARC WELDING |
| ASTM B 849 : 2002 | Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| ISO 7539-6:2011 | Corrosion of metals and alloys Stress corrosion testing Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| API 941 : 2016 | STEELS FOR HYDROGEN SERVICE AT ELEVATED TEMPERATURES AND PRESSURES IN PETROLEUM REFINERIES AND PETROCHEMICAL PLANTS |
| ISO 16528-1:2007 | Boilers and pressure vessels — Part 1: Performance requirements |
| ISO 9588:2007 | Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
| ISO 11623:2015 | Gas cylinders — Composite construction — Periodic inspection and testing |
| SAE AMS 2759/9 : 2009 | HYDROGEN EMBRITTLEMENT RELIEF (BAKING) OF STEEL PARTS |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| ISO 17081:2014 | Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique |
| API 934-A : 2008 | MATERIALS AND FABRICATION OF 2 [1/4]CR-1MO, 2 [1/4]CR-1MO-[1/4]V, 3CR-1MO, AND 3CR-1MO-[1/4]V STEEL HEAVY WALL PRESSURE VESSELS FOR HIGH-TEMPERATURE, HIGH-PRESSURE HYDROGEN SERVICE |
| ISO 11114-4:2017 | Transportable gas cylinders Compatibility of cylinder and valve materials with gas contents Part 4: Test methods for selecting steels resistant to hydrogen embrittlement |
| ISO 10461:2005 | Gas cylinders Seamless aluminium-alloy gas cylinders Periodic inspection and testing |
| ASTM F 2078 : 2015 : REDLINE | Standard Terminology Relating to Hydrogen Embrittlement Testing |
| ISO 11119-1:2012 | Gas cylinders Refillable composite gas cylinders and tubes Design, construction and testing Part 1: Hoop wrapped fibre reinforced composite gas cylinders and tubes up to 450 l |
| ISO 6406:2005 | Gas cylinders Seamless steel gas cylinders Periodic inspection and testing |
| ISO 3690:2012 | Welding and allied processes Determination of hydrogen content in arc weld metal |
| ISO 2626:1973 | Copper — Hydrogen embrittlement test |
| ASTM F 1624 : 2012-11 | TEST METHOD FOR MEASUREMENT OF HYDROGEN EMBRITTLEMENT THRESHOLD IN STEEL BY THE INCREMENTAL STEP LOADING TECHNIQUE |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ASME PV CODE SET : 2017 | BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
| ASTM F 326 : 1996 | Standard Test Method for Electronic Measurement for Hydrogen Embrittlement from Cadmium-Electroplating Processes |
| AIAA G 095 : 2004 | GUIDE TO SAFETY OF HYDROGEN AND HYDROGEN SYSTEMS |
| SAE USCAR 5 : 2012 | AVOIDANCE OF HYDROGEN EMBRITTLEMENT OF STEEL |
| SAE AMS 2451/4D : 2017 | PLATING, BRUSH, CADMIUM CORROSION PROTECTIVE, LOW HYDROGEN EMBRITTLEMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.