BS ISO 12000:2014
Current
The latest, up-to-date edition.
Plastics/rubber. Polymer dispersions and rubber lattices (natural and synthetic). Definitions and review of test methods
Hardcopy , PDF
English
30-09-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Sampling
5 Conditioning
6 Test methods
7 Precision of the test methods used
8 Test report
Describes definitions relative to polymer dispersions and latices and identifies the test methods applicable for determining the properties of polymer dispersions, comprising products of synthetic or natural origin including synthetic and natural rubber latices.
| Committee |
PRI/21
|
| DevelopmentNote |
Supersedes 99/124270 DC. (07/2005) Supersedes 11/30242926 DC. (10/2014)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard gives definitions relative to polymer dispersions and latices and identifies the test methods applicable for determining the properties of polymer dispersions, comprising products of synthetic or natural origin including synthetic and natural rubber latices. Some of the test methods apply only to polymer dispersions or latices of specific chemical composition or to those to be used for specific applications.
NOTE When they are not the subject of an existing International Standard, the test methods to be used for investigation of an individual polymer dispersion or latex are intended to be the subject of an agreement between the interested parties.
| Standards | Relationship |
| ISO 12000:2014 | Identical |
| ISO 2811-1:2016 | Paints and varnishes — Determination of density — Part 1: Pycnometer method |
| ISO 2006-2:2009 | Rubber latex, synthetic — Determination of mechanical stability — Part 2: Moderate-speed method under load |
| ISO 124:2014 | Latex, rubber — Determination of total solids content |
| ISO 13741-2:1998 | Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 2: Headspace method |
| ISO 1147:1995 | Plastics/rubber — Polymer dispersions and synthetic rubber latices — Freeze-thaw cycle stability test |
| ISO 1409:2006 | Plastics/rubber Polymer dispersions and rubber latices (natural and synthetic) Determination of surface tension by the ring method |
| ISO 1656:2014 | Rubber, raw natural, and rubber latex, natural Determination of nitrogen content |
| ISO 2005:2014 | Rubber latex, natural, concentrate — Determination of sludge content |
| ISO 3136:1983 | Rubber latex — Styrene-butadiene — Determination of bound styrene content |
| ISO 3219:1993 | Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
| ISO 2811-3:2011 | Paints and varnishes — Determination of density — Part 3: Oscillation method |
| ISO 3899:2005 | Rubber — Nitrile latex — Determination of residual acrylonitrile content |
| ISO 3900:1995 | Rubber — Nitrile latex — Determination of bound acrylonitrile content |
| ISO 9252:1989 | Synthetic rubber latex Microbiological examination |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| ISO 13741-1:1998 | Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 1: Direct liquid injection method |
| ISO 7143:2007 | Binders for paints and varnishes — Methods of test for characterizing water-based binders |
| ISO 705:2015 | Rubber latex Determination of density between 5 degrees C and 40 degrees C |
| ISO 127:2012 | Rubber, natural latex concentrate Determination of KOH number |
| ISO 7780:1998 | Rubbers and rubber latices Determination of manganese content Sodium periodate photometric methods |
| ISO 1802:1992 | Natural rubber latex concentrate Determination of boric acid content |
| ISO 2555:1989 | Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 2006-1:2009 | Rubber latex, synthetic — Determination of mechanical stability — Part 1: High-speed method |
| ISO 1657:1986 | Rubber, raw and rubber latex Determination of iron content 1,10-Phenanthroline photometric method |
| ISO 506:1992 | Rubber latex, natural, concentrate Determination of volatile fatty acid number |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 4655:1985 | Rubber Reinforced styrene-butadiene latex Determination of total bound styrene content |
| ISO 13773:1997 | Rubber — Polychloroprene latex — Determination of alkalinity |
| ISO 2115:1996 | Plastics Polymer dispersions Determination of white point temperature and minimum film-forming temperature |
| ISO 8053:1995 | Rubber and latex Determination of copper content Photometric method |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| ISO 125:2011 | Natural rubber latex concentrate Determination of alkalinity |
| ISO 976:2013 | Rubber and plastics — Polymer dispersions and rubber latices — Determination of pH |
| ISO 4576:1996 | Plastics — Polymer dispersions — Determination of sieve residue (gross particle and coagulum content) |
| ISO 126:2005 | Natural rubber latex concentrate — Determination of dry rubber content |
| ISO 706:2004 | Rubber latex — Determination of coagulum content (sieve residue) |
| ISO 1652:2011 | Rubber latex Determination of apparent viscosity by the Brookfield test method |
| ISO 35:2004 | Natural rubber latex concentrate Determination of mechanical stability |
| ISO 123:2001 | Rubber latex Sampling |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.