BS ISO 11515 : 2013
Current
The latest, up-to-date edition.
GAS CYLINDERS - REFILLABLE COMPOSITE REINFORCED TUBES OF WATER CAPACITY BETWEEN 450 L AND 3000 L - DESIGN, CONSTRUCTION AND TESTING
Hardcopy , PDF
English
01-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols
5 Inspection and testing
6 Materials
7 Design and manufacture
8 Type approval procedure
9 Inspection and testing at time of manufacture
10 Tube marking
Annex A (informative) - Examples of design approval
certificate
Annex B (informative) - Specimen test reports
Annex C (normative) - Ultrasonic inspection for seamless
steel liners and metal tubing
Bibliography
Defines minimum requirements for the design, construction and performance testing of composite reinforced tubes between 450 l and 3000 l water capacity, for transport, storage and use of compressed or liquefied gases with test pressures up to and including 1600 bar with a design life of at least 15 years and less than or equal to 30 years.
| Committee |
PVE/3/3
|
| DevelopmentNote |
Supersedes 10/30196135 DC. (08/2013)
|
| DocumentType |
Standard
|
| Pages |
100
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 11515:2013 | Identical |
| ISO 7225:2005 | Gas cylinders — Precautionary labels |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 9809-3:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 3: Normalized steel cylinders |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 2013:1983 | Textile machinery and accessories Beams Method of measuring variations of form and position |
| ISO 3341:2000 | Textile glass Yarns Determination of breaking force and breaking elongation |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| ISO 7866:2012 | Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing |
| ISO 10618:2004 | Carbon fibre — Determination of tensile properties of resin-impregnated yarn |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| ISO 11120:2015 | Gas cylinders Refillable seamless steel tubes of water capacity between 150 l and 3000 l Design, construction and testing |
| ISO 9809-2:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 2: Quenched and tempered steel cylinders with tensile strength greater than or equal to 1 100 MPa |
| ASTM D 2794 : 1993 | TEST METHOD FOR RESISTANCE OF ORGANIC COATINGS TO THE EFFECTS OF RAPID DEFORMATION (IMPACT) |
| ISO 306:2013 | Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 9809-1:2010 | Gas cylinders Refillable seamless steel gas cylinders Design, construction and testing Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa |
| ASTM D 522 : 1993 : REV A | Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings |
| ISO 13769:2007 | Gas cylinders Stamp marking |
| ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
| ISO 11439:2013 | Gas cylinders — High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.