BS ISO 10631:2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Metallic butterfly valves for general purposes
Hardcopy , PDF
10-05-2021
English
30-09-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Pressure/temperature ratings
5 Design
6 Materials
7 Suitability of use
8 Marking
9 Testing
10 Inspection and preparation for dispatch
11 Example of data sheet
Annex A (informative) - Example of data sheet
Bibliography
Describes requirements for design, materials (e.g. steel, cast iron, ductile iron, copper alloy), pressure/temperature ratings and testing for butterfly valves having metallic bodies for use in general purpose flanged or butt welding piping systems.
| Committee |
PSE/18/3
|
| DevelopmentNote |
Supersedes 12/30236280 DC. (09/2013)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 10631:2013 | Identical |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| ISO 9328-4:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 4: Nickel-alloy steels with specified low temperature properties |
| ISO 1083:2004 | Spheroidal graphite cast irons - Classification |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ISO 7005-3:1988 | Metallic flanges Part 3: Copper alloy and composite flanges |
| ASME B16.42 : 2016 | DUCTILE IRON PIPE FLANGES AND FLANGED FITTINGS - CLASSES 150 AND 300 |
| EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| ISO 5922:2005 | Malleable cast iron |
| ISO 4991:2015 | Steel castings for pressure purposes |
| EN 12516-4:2014 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| ISO 5209:1977 | General purpose industrial valves Marking |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| ISO 9328-3:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 3: Weldable fine grain steels, normalized |
| ISO 9328-5:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 5: Weldable fine grain steels, thermomechanically rolled |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| ISO 5752:1982 | Metal valves for use in flanged pipe systems Face-to-face and centre-to-face dimensions |
| EN 593:2017 | Industrial valves - Metallic butterfly valves for general purposes |
| ISO 9328-2:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
| ISO 7121:2016 | Steel ball valves for general-purpose industrial applications |
| ISO 9328-1:2011 | Steel flat products for pressure purposes Technical delivery conditions Part 1: General requirements |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ASME B16.34 : 2017 | VALVES - FLANGED, THREADED, AND WELDING END |
| ISO 9327-4:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 4: Weldable fine grain steels with high proof strength |
| ISO 185:2005 | Grey cast irons Classification |
| IEC 60534-2-3:2015 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
| ISO 9327-1:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 1: General requirements |
| ISO 9327-5:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 5: Stainless steels |
| EN 12516-2:2014 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
| ISO 9327-3:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 3: Nickel steels with specified low temperature properties |
| ASME B16.47 : 2017 | LARGE DIAMETER STEEL FLANGES: NPS 26 THROUGH NPS 60 METRIC/INCH STANDARD |
| ISO 9327-2:1999 | Steel forgings and rolled or forged bars for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specified elevated temperature properties |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| ISO 3755:1991 | Cast carbon steels for general engineering purposes |
| ASME B16.25 : 2012 | BUTTWELDING ENDS |
| ISO 5211:2017 | Industrial valves — Part-turn actuator attachments |
| ISO 5208:2015 | Industrial valves Pressure testing of metallic valves |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.