BS EN ISO 22435 : 2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
GAS CYLINDERS - CYLINDER VALVES WITH INTEGRATED PRESSURE REGULATORS - SPECIFICATION AND TYPE TESTING
Hardcopy , PDF
04-04-2024
English
01-01-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and terminology
5 Design requirements
6 Test methods
7 Marking
8 Instructions
Annex A (normative) - Valve impact test
Annex B (informative) - Endurance test
Bibliography
Pertains to cylinder valves with integrated pressure regulators (VIPR) intended to be fitted to gas cylinders that convey compressed, liquefied or dissolved gases.
| Committee |
PVE/3/1
|
| DevelopmentNote |
2007 Edition Re-issued in March 2013 & incorporates AMD 1 2012. Supersedes 11/30241704 DC. (04/2013)
|
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NBN EN ISO 22435 : 2008 AMD 1 2013 | Identical |
| I.S. EN ISO 22435:2007 | Identical |
| DIN EN ISO 22435:2013-03 | Identical |
| UNI EN ISO 22435 : 2013 | Identical |
| ISO 22435:2007 | Identical |
| NEN EN ISO 22435 : 2007 AMD 1 2012 | Identical |
| NF EN ISO 22435 : 2007 AMD 1 2013 | Identical |
| NS EN ISO 22435 : 2007 AMD 1 2012 | Identical |
| SN EN ISO 22435 : 2007 AMD 1 2013 | Identical |
| ONORM EN ISO 22435 : 2013 | Identical |
| ISO 5171:2009 | Gas welding equipment Pressure gauges used in welding, cutting and allied processes |
| ISO 11114-1:2012 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 1: Metallic materials |
| ISO 10920:1997 | Gas cylinders — 25E taper thread for connection of valves to gas cylinders — Specification |
| ISO 15001:2010 | Anaesthetic and respiratory equipment Compatibility with oxygen |
| ISO 14513:2016 | Road vehicles — Pedestrian protection — Head impact test method |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| ISO 7292:1997 | Flowmeter regulators used on cylinders for welding, cutting and allied processes Classification and specifications |
| ISO 13341:2010 | Gas cylinders — Fitting of valves to gas cylinders |
| ISO 5145:2014 | Cylinder valve outlets for gases and gas mixtures Selection and dimensioning |
| EN 14513:2005 | Transportable gas cylinders - Bursting disc pressure relief devices (excluding acetylene gas cylinders) |
| ISO 10297:2014 | Gas cylinders — Cylinder valves — Specification and type testing |
| ISO 2503:2009 | Gas welding equipment Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) |
| EN 13918 : 2003 | GAS WELDING EQUIPMENT - INTEGRATED FLOWMETER REGULATORS USED ON CYLINDERS FOR WELDING, CUTTING AND ALLIED PROCESSES - CLASSIFICATION, SPECIFICATION AND TESTS |
| ISO 7291:2010 | Gas welding equipment Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) |
| ISO 10524-3:2005 | Pressure regulators for use with medical gases Part 3: Pressure regulators integrated with cylinder valves |
| ISO 11114-2:2013 | Gas cylinders Compatibility of cylinder and valve materials with gas contents Part 2: Non-metallic materials |
| ISO 10156:2017 | Gas cylinders — Gases and gas mixtures — Determination of fire potential and oxidizing ability for the selection of cylinder valve outlets |
| ISO/TR 7470:1988 | Valve outlets for gas cylinders — List of provisions which are either standardized or in use |
| ISO 7289:2010 | Gas welding equipment Quick-action couplings with shut-off valves for welding, cutting and allied processes |
| ISO 3253:1998 | Gas welding equipment Hose connections for equipment for welding, cutting and allied processes |
| ISO 11117:2008 | Gas cylinders Valve protection caps and valve guards Design, construction and tests |
| ISO 15996:2017 | Gas cylinders — Residual pressure valves — Specification and type testing of cylinder valves incorporating residual pressure devices |
| ISO 9090:1989 | Gas tightness of equipment for gas welding and allied processes |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.