BS EN ISO 17296-3:2016
Current
Current
The latest, up-to-date edition.
Additive manufacturing. General principles Main characteristics and corresponding test methods
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
30-11-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Main characteristics and corresponding
test methods
5 Part and process testing - Specifications
and quality criteria
Bibliography
Includes the principal requirements applied to testing of parts manufactured by additive manufacturing processes.
| Committee |
AMT/8
|
| DevelopmentNote |
Supersedes 13/30271610 DC. Renumbers and supersedes BS ISO 17296-3. 2016 version incorporates corrigendum to BS ISO 17296-3. (11/2016)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
This part of ISO 17296 covers the principal requirements applied to testing of parts manufactured by additive manufacturing processes.
This part of ISO 17296
specifies main quality characteristics of parts,
specifies appropriate test procedures, and
recommends the scope and content of test and supply agreements.
This part of ISO 17296 is aimed at machine manufacturers, feedstock suppliers, machine users, part providers, and customers to facilitate the communication on main quality characteristics. It applies wherever additive manufacturing processes are used.
| Standards | Relationship |
| ISO 17296-3:2014 | Identical |
| EN ISO 17296-3:2016 | Identical |
| ISO 23146:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method |
| ISO 14610:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of porous ceramics at room temperature |
| ISO 13320:2009 | Particle size analysis Laser diffraction methods |
| ISO 13003:2003 | Fibre-reinforced plastics — Determination of fatigue properties under cyclic loading conditions |
| ISO 15850:2014 | Plastics — Determination of tension-tension fatigue crack propagation — Linear elastic fracture mechanics (LEFM) approach |
| ISO 14629:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of flowability of ceramic powders |
| ISO 3923-2:1981 | Metallic powders — Determination of apparent density — Part 2: Scott volumeter method |
| ISO 3451-1:2008 | Plastics Determination of ash Part 1: General methods |
| ISO 18754:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of density and apparent porosity |
| ISO 1068:1975 | Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of compacted apparent bulk density |
| ISO 20808:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of friction and wear characteristics of monolithic ceramics by ball-on-disc method |
| ISO 1938-1:2015 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size |
| ISO 8130-1:1992 | Coating powders Part 1: Determination of particle size distribution by sieving |
| ISO 148-2:2016 | Metallic materials — Charpy pendulum impact test — Part 2: Verification of testing machines |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| ISO 17162:2014 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of monolithic ceramics at room temperature — Determination of compressive strength |
| ISO 11664-4:2008 | Colorimetry Part 4: CIE 1976 L*a*b* Colour space |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 18753:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pycnometer |
| ISO 7625:2012 | Sintered metal materials, excluding hardmetals — Preparation of samples for chemical analysis for determination of carbon content |
| ISO 15490:2008 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile strength of monolithic ceramics at room temperature |
| ISO 22889:2013 | Metallic materials Method of test for the determination of resistance to stable crack extension using specimens of low constraint |
| ISO 4324:1977 | Surface active agents — Powders and granules — Measurement of the angle of repose |
| ISO 5579:2013 | Non-destructive testing — Radiographic testing of metallic materials using film and X- or gamma rays — Basic rules |
| ISO 4497:1983 | Metallic powders Determination of particle size by dry sieving |
| ISO 148-1:2016 | Metallic materials — Charpy pendulum impact test — Part 1: Test method |
| ISO 6186:1998 | Plastics — Determination of pourability |
| ISO 4506:1979 | Hardmetals Compression test |
| ISO 3452-1:2013 | Non-destructive testing Penetrant testing Part 1: General principles |
| ISO 22214:2006 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of monolithic ceramics at room temperature |
| ISO 11664-1:2007 | Colorimetry Part 1: CIE standard colorimetric observers |
| ISO 14705:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| ISO 14704:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for flexural strength of monolithic ceramics at room temperature |
| ISO 3452-2:2013 | Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials |
| ISO 3369:2006 | Impermeable sintered metal materials and hardmetals — Determination of density |
| ISO 18756:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method |
| ISO 286-1:2010 | Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances, deviations and fits |
| ISO 16348:2003 | Metallic and other inorganic coatings Definitions and conventions concerning appearance |
| ISO 13319:2007 | Determination of particle size distributions Electrical sensing zone method |
| ISO 9934-1:2016 | Non-destructive testing — Magnetic particle testing — Part 1: General principles |
| ISO 18757:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of specific surface area of ceramic powders by gas adsorption using the BET method |
| ISO 4610:2001 | Plastics Vinyl chloride homopolymer and copolymer resins Sieve analysis using air-jet sieve apparatus |
| ISO 22215:2006 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for tensile creep of monolithic ceramics |
| ISO/ASTM 52915:2016 | Specification for additive manufacturing file format (AMF) Version 1.2 |
| ISO 604:2002 | Plastics — Determination of compressive properties |
| ISO 129-1:2004 | Technical drawings Indication of dimensions and tolerances Part 1: General principles |
| ISO 1143:2010 | Metallic materials Rotating bar bending fatigue testing |
| ISO 24370:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method |
| ISO 4490:2014 | Metallic powders Determination of flow rate by means of a calibrated funnel (Hall flowmeter) |
| ISO 14703:2008 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Sample preparation for the determination of particle size distribution of ceramic powders |
| ISO 1099:2017 | Metallic materials — Fatigue testing — Axial force-controlled method |
| ISO 3327:2009 | Hardmetals — Determination of transverse rupture strength |
| ISO 14405-1:2016 | Geometrical product specifications (GPS) — Dimensional tolerancing — Part 1: Linear sizes |
| ISO 11664-2:2007 | Colorimetry — Part 2: CIE standard illuminants |
| ISO 24235:2007 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of particle size distribution of ceramic powders by laser diffraction method |
| ISO 11664-5:2009 | Colorimetry Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 15732:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
| ISO 9277:2010 | Determination of the specific surface area of solids by gas adsorption — BET method |
| ISO 28704:2011 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of porous ceramics at room temperature |
| ISO 9276-6:2008 | Representation of results of particle size analysis — Part 6: Descriptive and quantitative representation of particle shape and morphology |
| ISO 204:2009 | Metallic materials Uniaxial creep testing in tension Method of test |
| ISO 6601:2002 | Plastics — Friction and wear by sliding — Identification of test parameters |
| ISO 14129:1997 | Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.