BS EN ISO 16137:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Industrial valves. Check valves of thermoplastic materials
Hardcopy , PDF
14-09-2019
English
24-03-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Design
4.2 Materials
4.3 Pressure/temperature rating
4.4 Dimensions
4.5 Operation
4.6 Functional characteristics
4.7 Manufacture
4.8 Other requirements
5 Test procedures
5.1 Documentation of test results
5.2 Initial type tests
6 Declaration of compliance
7 Designation
8 Marking and preparation for storage and transportation
8.1 Marking and documentation
8.2 Preparation for storage and transportation
Annex A (informative) Procurement information
Annex ZA (informative) Relationship between this International
Standard and the Essential Requirements of EU
Directive 97/23 EC (PED)
Bibliography
Specifies requirements for the design, functional characteristics and manufacture of check valves made of thermoplastics materials intended to allow the flow of liquid fluids through the valve in one direction only and to prevent backflow, their connection to the pipe system, the body materials and their pressure/temperature rating between -40 degrees Celsius and +120 degrees Celsius, for a lifetime of 25 years, and also specifies their tests.
| Committee |
PSE/18/3
|
| DevelopmentNote |
Supersedes 01/709786 DC. (04/2006)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 16137 : 2008 | Identical |
| SN EN ISO 16137 : 2006 | Identical |
| ISO 16137:2006 | Identical |
| NEN EN ISO 16137 : 2006 | Identical |
| EN ISO 16137:2006 | Identical |
| NF EN ISO 16137 : 2006 | Identical |
| NS EN ISO 16137 : 1ED 2006 | Identical |
| UNE-EN ISO 16137:2007 | Identical |
| DIN EN ISO 16137:2006-06 | Identical |
| UNI EN ISO 16137 : 2006 | Identical |
| I.S. EN ISO 16137:2006 | Identical |
| NBN EN ISO 16137 : 2006 | Identical |
| ISO 15493:2003 | Plastics piping systems for industrial applications Acrylonitrile-butadiene-styrene (ABS), unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly(vinyl chloride) (PVC-C) Specifications for components and the system Metric series |
| ISO/TR 10358:1993 | Plastics pipes and fittings Combined chemical-resistance classification table |
| ISO 15494:2015 | Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| ISO 9393-2:2005 | Thermoplastics valves for industrial applications — Pressure test methods and requirements — Part 2: Test conditions and basic requirements |
| EN 558-1 : 1995 | INDUSTRIAL VALVES - FACE-TO-FACE AND CENTRE-TO-FACE DIMENSIONS OF METAL VALVES FOR USE IN FLANGED PIPE SYSTEMS - PN-DESIGNATED VALVES |
| EN 805:2000 | Water supply - Requirements for systems and components outside buildings |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| ISO 10931:2005 | Plastics piping systems for industrial applications Poly(vinylidene fluoride) (PVDF) Specifications for components and the system |
| ISO 12162:2009 | Thermoplastics materials for pipes and fittings for pressure applications Classification, designation and design coefficient |
| ISO 12092:2000 | Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure Resistance to internal pressure Test method |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| ISO 8659:1989 | Thermoplastics valves Fatigue strength Test method |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| EN 558-2 : 1995 | INDUSTRIAL VALVES - FACE-TO-FACE AND CENTRE-TO-FACE DIMENSIONS OF METAL VALVES FOR USE IN FLANGED PIPE SYSTEMS - CLASS-DESIGNATED VALVES |
| EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
| EN 12107 : 1997 | PLASTICS PIPING SYSTEM - INJECTION MOULDED THERMOPLASTICS FITTINGS, VALVES AND ANCILLARY EQUIPMENT - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS FOR INJECTION MOULDING OF PIPING COMPONENTS |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.