BS EN ISO 1519:2011
Current
The latest, up-to-date edition.
Paints and varnishes. Bend test (cylindrical mandrel)
Hardcopy , PDF
English
31-01-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Principle
4 Apparatus
5 Sampling
6 Test panels
7 Procedure
8 Expression of results
9 Precision
10 Test report
Bibliography
Describes an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastics substrate when subjected to bending round a cylindrical mandrel under standard conditions.
| Committee |
STI/10
|
| DevelopmentNote |
Supersedes BS 3900-E1(1970) and BS 3900-E1(1995). Supersedes 97/125682 DC. Supersedes 09/30196695 DC. (02/2011) Supersedes BS 3900-E1(2002). (02/2011)
|
| DocumentType |
Standard
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This International Standard specifies an empirical test procedure for assessing the resistance of a coating of paint, varnish or related product to cracking and/or detachment from a metal or plastics substrate when subjected to bending round a cylindrical mandrel under standard conditions.
For a multi-coat system, each coat can be tested separately or the complete system can be tested.
The method specified can be carried out
-
either as a “pass/fail” test, by carrying out the test with a single specified size of mandrel, to assess compliance with a particular requirement;
-
or by repeating the procedure using successively smaller mandrels to determine the diameter of the first mandrel over which the coating cracks and/or becomes detached from the substrate.
Two types of apparatus are specified, type1 being appropriate for use on test panels of thickness up to 0,3mm, and type2 for use on test panels of thickness up to 1,0mm. Both types of apparatus have been found to give similar results with the same coating, but normally only one will be used for testing a given product.
| Standards | Relationship |
| SN EN ISO 1519:2011 | Identical |
| NBN EN ISO 1519 : 2011 | Identical |
| UNI EN ISO 1519 : 2011 | Identical |
| NS EN ISO 1519 : 2011 | Identical |
| UNE-EN ISO 1519:2011 | Identical |
| EN ISO 1519:2011 | Identical |
| DIN EN ISO 1519:2011-04 | Identical |
| NEN EN ISO 1519 : 2011 | Identical |
| ISO 1519:2011 | Identical |
| NF EN ISO 1519 : 2011 | Identical |
| I.S. EN ISO 1519:2011 | Identical |
| SAE AMS 79-015 : 2017 | COMPOUND, CLEANING GEL FOR AIRCRAFT SURFACES |
| BS 5X 17(1998) : 1998 | SPECIFICATION FOR OLEORESINOUS VARNISH FOR AEROSPACE PURPOSES |
| DEFSTAN 80-125/5(2017) : 2017 | PAINT, FINISHING, EMULSION FOR CANVAS TYPES: BRUSHING OR SPRAYING |
| DEFSTAN 80-27/5(2009) : 2009 | PAINT, AMMUNITION FINISHING, BRUSHING, SPRAYING AND DIPPING TYPES: SEMI-GLOSS; MATT |
| DEFSTAN 80-224/1(2011) : 2011 | PAINT, ANTI-SLIP, TYPE: BRUSHING |
| DEFSTAN 79-17/2(1998) : 1998 | COMPOUND, CLEANING, FOAMING, FOR AIRCRAFT SURFACES |
| DEFSTAN 80-72/3(2006) : 2006 | PAINT SYSTEM, ACID AND ALKALI RESISTING |
| DEFSTAN 80-125/4(2011) : 2011 | PAINT, FINISHING, EMULSION FOR CANVAS TYPES: BRUSHING OR SPRAYING |
| DEFSTAN 80-65/3(2009) : 2009 | PAINT, FINISHING, FOR THE INTERIOR OF JERRICANS |
| DEFSTAN 80-31/3(1998) : 1998 | PAINT, FINISHING, GENERAL SERVICE, ALUMINIUM TYPE: BRUSHING/SPRAYING |
| DEFSTAN 79-15/2(1998) : 1998 | COMPOUND, CLEANING GEL FOR AIRCRAFT SURFACES |
| DEFSTAN 80-41/3(2000) : 2000 | PAINT FINISHING, DEFENCE EQUIPMENT MATT TYPE: BRUSHING SPRAYING |
| DEFSTAN 80-60/3(1998) : 1998 | PAINT, SYSTEM, STOVING, HAMMER, FINISH, SPRAYING |
| DEFSTAN 80-216/2(2012) : 2012 | PAINT, FILLER, EPOXY, SPRAYING, MULTI-PACK |
| DEFSTAN 80-214/2(2002) : 2002 | PAINT, FINISH, SELECTIVELY STRIPPABLE, ACRYLIC TYPES: BRUSHING SPRAYING |
| DEFSTAN 80-037/4(2017) : 2017 | PAINT, FINISHING, OIL-RESISTING TYPES: BRUSHING OR SPRAYING |
| DEFSTAN 80-37/3(2011) : 2011 | PAINT, FINISHING, OIL-RESISTING - TYPES: BRUSHING OR SPRAYING |
| DEFSTAN 80-30/3(1998) : 1998 | PAINT, FINISHING, GASOLINE-RESISTANT TYPES: BRUSHING SPRAYING |
| DEFSTAN 80-164/3(2009) : 2009 | PAINT, SYSTEM, FLUORESCENT |
| DEFSTAN 80-215/3(2017) : 2017 | PAINT, FINISHING, TEMPORARY COLOUR, ALKALI REMOVABLE, NON-AEROSPACE USE |
| DEFSTAN 80-37/2(2006) : 2006 | PAINT, FINISHING, CELLULOSE NITRATE, OIL RESISTING TYPES: BRUSHING, SPRAYING |
| DEFSTAN 80-31/4(2005) : 2005 | PAINT, FINISHING, GENERAL SERVICE ALUMINIUM TYPE: BRUSHING OR SPRAYING |
| DEFSTAN 80-214/3(2009) : 2009 | PAINT, FINISH, SELECTIVELY STRIPPABLE, ACRYLIC - TYPES: BRUSHING, SPRAYING |
| DEFSTAN 80-65/2(1998) : 1998 | PAINT, FINISHING FOR JERRICANS, STOVING TYPES: INTERIOR EXTERIOR |
| DEFSTAN 80-218/3(2017) : 2017 | TEMPORARY COLOUR COATING (TCC) REMOVER, NON-AIRCRAFT USE |
| DEFSTAN 80-27/4(1998) : 1998 | PAINT, AMMUNITION FINISHING, BRUSHING, SPRAYING AND DIPPING TYPES: SEMI GLOSS MATT |
| DEFSTAN 80-031/6(2017) : 2017 | PAINT, FINISHING, GENERAL SERVICE, ALUMINIUM - TYPE: BRUSHING OR SPRAYING |
| DEFSTAN 80-054/6(2017) : 2017 | PAINT, FINISHING, GENERAL SERVICE, FUEL RESISTANT, GLOSS - TYPE: BRUSHING OR SPRAYING |
| DEFSTAN 80-207/2(2003) : 2003 | PAINT, PRIMING, ZINC CHROMATE, NON AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
| DEFSTAN 80-31/5(2012) : 2012 | PAINT, FINISHING, GENERAL SERVICE, ALUMINIUM TYPE: BRUSHING OR SPRAYING |
| DEFSTAN 80-138/3(2007) : 2007 | VARNISH, POLYURETHANE, MULTI-PACK TYPES: MATT AND GLOSS |
| DEFSTAN 80-128/3(2004) : 2004 | PAINT, FINISHING, TEMPORARY CAMOUFLAGE, ALKALI REMOVABLE FOR AEROSPACE USE |
| DEFSTAN 80-54/5(2010) : 2010 | PAINT, FINISHING, GENERAL SERVICE, FUEL RESISTANT, GLOSS - TYPE: BRUSHING OR SPRAYING |
| DEFSTAN 80-129/3(1998) : 1998 | VARNISH, ELECTRICAL INSULATING, BRUSHING - TYPE 1: STANDARD - TYPE 2: FUNGICIDAL |
| DEFSTAN 80-129/5(2010) : 2010 | VARNISH, ELECTRICAL INSULATING, BRUSHING OR SPRAYING - TYPE 1: STANDARD, TYPE 2: FUNGICIDAL |
| DEFSTAN 80-138/4(2009) : 2009 | VARNISH, POLYURETHANE, MULTI-PACK - TYPES: MATT AND GLOSS |
| DEFSTAN 80-218/2(2006) : 2006 | TEMPORARY COLOUR COATING (TCC) REMOVER, NON-AIRCRAFT USE |
| DEFSTAN 80-124/3(2017) : 2017 | PAINT, PRIMING, DEFENCE EQUIPMENT, STOVING - TYPES: SPRAYING AND DIPPING |
| DEFSTAN 80-222/1(2007) : 2007 | SURFACE DEGREASING CLEANER FOR AEROSPACE PURPOSES |
| DEFSTAN 80-129/4(2005) : 2005 | VARNISH ELECTRICAL INSULATING, BRUSHING OR SPRAYING - TYPE 1: STANDARD, TYPE 2: FUNGICIDAL |
| DEFSTAN 68-148/2(1998) : 1998 | SOLVENT FOR CLEANING ELECTRICAL AND AEROSPACE EQUIPMENT |
| DEFSTAN 80-206/2(2003) : 2003 | PAINT, PRIMING, ZINC PHOSPHATE, NON AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
| DEFSTAN 05-50(PT23)/2(1997) : 1997 | METHODS FOR TESTING FUELS, LUBRICANTS AND ASSOCIATED PRODUCTS - PART 23: METHODS FOR CORROSION PREVENTATIVES |
| DEFSTAN 80-48/3(1999) : 1999 | PAINT, FINISHING, GENERAL SERVICE, GLOSS, STOVING, SPRAYING |
| DEFSTAN 80-065/4(2017) : 2017 | PAINT, FINISHING, FOR THE INTERIOR OF JERRICANS |
| DEFSTAN 80-164/2(1998) : 1998 | PAINT SYSTEM, FLUORESCENT |
| DEFSTAN 80-215/2(2006) : 2006 | PAINT, FINISHING, TEMPORARY COLOUR, ALKALI REMOVABLE, NON-AEROSPACE USE |
| BS 2X 26:2001 | Doping and finishing schemes for fabric covered aircraft |
| DEFSTAN 80-218/1(2005) : 2005 | TEMPORARY CAMOUFLAGE COATING (TCC) REMOVER (NON - AIRCRAFT USE) |
| DEFSTAN 80-206/3(2009) : 2009 | PAINT, PRIMING, ZINC PHOSPHATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
| DEFSTAN 80-207/3(2009) : 2009 | PAINT, PRIMING, ZINC CHROMATE, NON-AIRCRAFT USE, LOW VOC SINGLE OR MULTI-PACK |
| BS 1722-16:2009 | Fences Specification for powder coatings used as a plastics finish to components and mesh |
| BS 7664:2000 | Specification for undercoat and finishing paints |
| 14/30290243 DC : 0 | BS 5X 17:1998+A1 - SPECIFICATION FOR OLEORESINOUS VARNISH FOR AEROSPACE PURPOSES |
| BS 4756:1998 | Specification for ready-mixed aluminium priming paints for woodwork |
| 14/30290247 DC : 0 | BS X38:2005 + A1 - HEAT CURING PAINT SCHEME FOR AEROSPACE PURPOSES - SPECIFICATION |
| SAE AMS 79-017 : 2017 | COMPOUND, CLEANING, FOAMING, FOR AIRCRAFT SURFACES |
| 07/30139517 DC : 0 | BS 1722-16 - FENCES - PART 16: SPECIFICATION FOR POWDER COATINGS USED AS A PLASTICS FINISH TO COMPONENTS AND MESH |
| DEFSTAN 80-131/2(2012) : 2012 | PAINT, ALUMINIUM, HEAT RESISTING TYPE: BRUSHING |
| DEFSTAN 80-131/3(2017) : 2017 | PAINT, ALUMINIUM, HEAT RESISTING - TYPE: BRUSHING |
| BS X38(2005) : 2005 | HEAT CURING PAINT SCHEME FOR AEROSPACE PURPOSES - SPECIFICATION |
| DEFSTAN 80-161/2(2002) : 2002 | PAINT, FINISHING, SPRAYING, EPOXY, MULTI-PACK |
| ISO 1514:2016 | Paints and varnishes — Standard panels for testing |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 15528:2013 | Paints, varnishes and raw materials for paints and varnishes Sampling |
| ISO 1513:2010 | Paints and varnishes Examination and preparation of test samples |
| ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.