BS EN ISO 14982:2009
Current
The latest, up-to-date edition.
Agricultural and forestry machinery. Electromagnetic compatibility. Test methods and acceptance criteria
Hardcopy , PDF
English
30-09-2009
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Definitions
4 Fulfilment of the requirements
5 Testing
5.1 Procedure
5.2 General requirements for immunity testing
6 Test/measurement methods and reference limits
6.1 Broadband electromagnetic emissions from
machines
6.2 Narrowband electromagnetic emissions from
machines
6.3 Immunity of machines to electromagnetic radiation
6.4 Broadband electromagnetic emissions radiated
from ESAs
6.5 Narrowband electromagnetic emissions radiated
from ESAs
6.6 Immunity of ESAs to electromagnetic radiation
6.7 Electrostatic discharge
6.8 Conducted transients
7 Exceptions
8 Test report
Annex A (normative) - Reference limits
Annex B (normative) - Method of measurement of radiated
broadband electromagnetic emissions
from machines
Annex C (normative) - Method of measurement of radiated
narrowband electromagnetic emissions
from machines
Annex D (normative) - Method of measurement of radiated
broadband electromagnetic emissions
from electrical/electronic sub-assemblies
Annex E (normative) - Method of measurement of radiated
narrowband electromagnetic emissions
from electrical/electronic sub-assemblies
Annex F (informative) - Guide for "worst case" selection
Annex G (informative) - Specimen test report for electromagnetic
compatibility
Annex H (informative) - Bibliography
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 2006/42/EC on machinery
Annex ZC (informative) - Relationship between this European
Standard and the Essential Requirements
of EU Directive 2004/108/EC on
electromagnetic compatibility
Describes the test methods and acceptance criteria for evaluating the electromagnetic compatibility of tractors and all kinds of mobile (including hand-held) agricultural machinery, forestry machinery, landscaping and gardening machinery [referred to hereafter as machine(s)] as supplied by the machine manufacturer.
| Committee |
AGE/6
|
| DevelopmentNote |
Supersedes 96/707912 DC. (11/2005)
|
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN ISO 14982 : 2009 | Identical |
| SN EN ISO 14982 : 2009 | Identical |
| UNE-EN ISO 14982:2009 | Identical |
| EN ISO 14982:2009 | Identical |
| NS EN ISO 14982 : 2009 | Identical |
| NF EN ISO 14982 : 2009 | Identical |
| DIN EN ISO 14982:2009-12 | Identical |
| NEN EN ISO 14982 : 2009 | Identical |
| I.S. EN ISO 14982:2009 | Identical |
| UNI EN ISO 14982 : 2009 | Identical |
| ISO 14982:1998 | Identical |
| EN 50081-1:1992 | Electromagnetic compatibility - Generic emission standard - Part 1: Residential, commercial and light industry |
| CISPR 12:2007+AMD1:2009 CSV | Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers |
| ISO 11452-3:2016 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 3: Transverse electromagnetic (TEM) cell |
| R210-001 : 1993 | |
| ISO 11783-2:2012 | Tractors and machinery for agriculture and forestry Serial control and communications data network Part 2: Physical layer |
| ISO 7637-1:2015 | Road vehicles — Electrical disturbances from conduction and coupling — Part 1: Definitions and general considerations |
| ISO 11452-4:2011 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 4: Harness excitation methods |
| 1989/336/EEC : 1989 | COUNCIL DIRECTIVE OF 3 MAY 1989 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY |
| ISO 7637-2:2011 | Road vehicles Electrical disturbances from conduction and coupling Part 2: Electrical transient conduction along supply lines only |
| 2004/108/EC : 2004 | DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 15 DECEMBER 2004 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO ELECTROMAGNETIC COMPATIBILITY AND REPEALING DIRECTIVE 89/336/EC |
| ISO/TR 10605:1994 | Road vehicles Electrical disturbances from electrostatic discharge |
| EN 50081-2:1993 | Electromagnetic compatibility - Generic emission standard - Part 2: Industrial environment |
| ISO 11452-2:2004 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Absorber-lined shielded enclosure |
| ISO 11452-1:2015 | Road vehicles Component test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
| ISO 13766:2006 | Earth-moving machinery Electromagnetic compatibility |
| EN 50082-2 : 95 AC 95 | ELECTROMAGNETIC COMPATIBILITY - GENERIC IMMUNITY STANDARD - INDUSTRIAL ENVIRONMENT |
| ISO 11452-5:2002 | Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 5: Stripline |
| ISO 11451-2:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 2: Off-vehicle radiation sources |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| CISPR 16-1:1999+AMD1:2002 CSV | Specification for radio disturbance and immunity measuring apparatus and methods - Part 1: Radio disturbance and immunity measuring apparatus |
| R210-002 : 1993 | GUIDE TO GENERIC STANDARDS |
| ISO 7637-0:1990 | Road vehicles Electrical disturbance by conduction and coupling Part 0: Definitions and general |
| ISO 11451-1:2015 | Road vehicles Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy Part 1: General principles and terminology |
| EN 50082-1:1997 | Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.