BS EN ISO 14713:1999
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines
Hardcopy , PDF
28-02-2010
BS EN ISO 14713-1:2009
BS EN ISO 14713-3:2009
BS EN ISO 14713-3:2017
BS EN ISO 14713-2:2009
BS EN ISO 14713-1:2017
English
15-04-1999
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative reference(s)
3 Term(s) and definitions(s)
4 Materials
4.1 Iron and steel substrates
4.2 Non-ferrous metals as coatings
5 Selection of zinc or aluminium coating system
6 Corrosion in different environments
6.1 Corrosion in the atmosphere
6.2 Corrosion in soil
6.3 Corrosion in water
6.4 Exceptional exposure (special cases)
6.4.1 General
6.4.2 Chemical attack
6.4.3 Abrasion
6.4.4 Exposure to elevated and high temperature
7 Design of protective system
7.1 General principles
7.2 Practical design
7.3 Tubes and hollow sections
7.3.1 General
7.3.2 Hot dip galvanized protection
7.3.3 Thermal spray protection
7.4 Connections
7.4.1 Fastenings to be used with thermal spray
or hot dip coatings
7.4.2 Welding considerations related to coatings
7.4.3 Brazing or soldering
7.5 Zinc or aluminium coatings with an overcoating
Annex A (informative) Design for hot dip galvanizing of products
Annex B (informative) Design for thermal spraying on iron and
steel substrates
Annex C (informative) Bibliography
Annex ZA (normative) Reference to international publications
with their relevant European publications
General recommendations concerning corrosion protection. Maintenance of corrosion protection is covered by BS EN ISO 12944-5
| Committee |
STI/34
|
| DevelopmentNote |
Together with BS EN ISO 12944-1, BS EN ISO 12944-2, BS EN ISO 12944-3, BS EN ISO 12944-4, BS EN ISO 12944-5, BS EN ISO 12944-6, BS EN ISO 12944-7 & BS EN ISO 12944-8, it partially supersedes BS 5493(1977). Supersedes 96/120934 DC & BS 4479-6(1990). (11/2005)
|
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 14713:1999 | Identical |
| I.S. EN ISO 14713:1999 | Identical |
| EN ISO 14713 : 1999 | Identical |
| NEN EN ISO 14713 : 1999 | Identical |
| SN EN ISO 14713 : 1999 | Identical |
| NF EN ISO 14713 : 1999 | Identical |
| DIN EN ISO 14713:1999-05 | Identical |
| UNE-EN ISO 14713:2000 | Identical |
| NBN EN ISO 14713 : 1999 | Identical |
| UNI EN ISO 14713 : 2001 | Identical |
| NS EN ISO 14713 : 1999 | Identical |
| 07/30172431 DC : DRAFT OCT 2007 | BS 4211 AMD1 - SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| 06/30094362 DC : DRAFT JAN 2006 | BS 4592-2 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 2: EXPANDED METAL GRATINGS - SPECIFICATION |
| DEFSTAN 03-30/3(2005) : 2005 | TREATMENTS FOR THE PROTECTION FOR METAL PARTS OF SERVICE STORES AND EQUIPMENT AGAINST CORROSION |
| 06/30094360 DC : DRAFT JAN 2006 | BS 4592-1 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 1: METAL OPEN BAR GRATINGS - SPECIFICATION |
| DEFSTAN 03-30/2(2000) : 2000 | TREATMENTS FOR THE PROTECTION FOR METAL PARTS OF SERVICE STORES AND EQUIPMENT AGAINST CORROSION |
| BS 1722-1:2006 | Fences Specification for chain link fences |
| BS 1722-14:2006 | Fences Specification for open mesh steel panel fences |
| BS 1722-14:2001 | Fences Specification for open mesh steel panel fences |
| BS 1722-8:2006 | Fences Specification for mild steel (low carbon steel) continuous bar fences and hurdles |
| 02/107760 DC : DRAFT DEC 2002 | BS 4211 - SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| BS 7543:2015 | Guide to durability of buildings and building elements, products and components |
| BS 5628-3:2001 | Code of practice for use of masonry Materials and components, design and workmanship |
| BS 4592-3:2006 | Industrial type flooring and stair treads Cold formed metal planks. Specification |
| BS 4592-2:2006 | Industrial type flooring and stair treads Expanded metal gratings. Specification |
| BS 4592-1:2006 | Industrial type flooring and stair treads Metal open bar gratings. Specification |
| BS 5395-1:2000 | Stairs, ladders and walkways Code of practice for the design, construction and maintenance of straight stairs and winders |
| BS 5502-21:1990 | Buildings and structures for agriculture Code of practice for selection and use of construction materials |
| 14/30277805 DC : 0 | BS 6150:2006+A1:2014 - PAINTING OF BUILDINGS - CODE OF PRACTICE |
| 06/30094364 DC : DRAFT JAN 2006 | BS 4592-3 - INDUSTRIAL TYPE FLOORING AND STAIR TREADS - PART 3: COLD FORMED METAL PLANKS - SPECIFICATION |
| EEMUA 105 : 2014 | FACTORY STAIRWAYS, LADDERS AND HANDRAILS (INCLUDING ACCESS PLATFORMS AND RAMPS) |
| PD 8010-2:2004 | Code of practice for pipelines Subsea pipelines |
| 17/30341308 DC : DRAFT JUNE 2017 | BS 1722-14 - FENCES - PART 14: SPECIFICATION FOR OPEN MESH STEEL PANEL |
| 15/30299694 DC : 0 | BS 8558 - GUIDE TO THE DESIGN, INSTALLATION, TESTING AND MAINTENANCE OF SERVICES SUPPLYING WATER FOR DOMESTIC USE WITHIN BUILDINGS AND THEIR CURTILAGES - COMPLEMENTARY GUIDANCE TO BS EN 806 |
| 05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| BS 6150(2006) : 2006 | PAINTING OF BUILDINGS - CODE OF PRACTICE |
| BS 4211(2005) : 2005 | SPECIFICATION FOR PERMANENTLY FIXED LADDERS |
| BS 1722-10:2006 | Fences Specification for anti-intruder fences in chain link and welded mesh |
| EN 10240:1997 | Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plants |
| ISO 9223:2012 | Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation |
| ISO 2063:2005 | Thermal spraying Metallic and other inorganic coatings Zinc, aluminium and their alloys |
| EN 10147 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED STRUCTURAL STEELS SHEET AND STRIP - TECHNICAL DELIVERY CONDITIONS |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles - Specifications and test methods (ISO 1461:2009) |
| EN 10142 : 2000 | CONTINUOUSLY HOT-DIP ZINC COATED LOW CARBON STEELS SHEET AND STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
| EN 10215 : 1995 | CONTINUOUSLY HOT-DIP ALUMINIUM-ZINC (AZ) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| EN ISO 2064:2000 | Metallic and other inorganic coatings - Definitions and conventions concerning the measurement of thickness (ISO 2064:1996) |
| ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
| ISO 2081:2008 | Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel |
| ISO 4998:2014 | Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality |
| EN ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012) |
| EN 10214 : 1995 | CONTINUOUSLY HOT-DIP ZINC-ALUMINIUM (ZA) COATED STEEL STRIP AND SHEET - TECHNICAL DELIVERY CONDITIONS |
| ISO 8503-1:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
| DIN 50930-3:1993-02 | CORROSION OF METALS; CORROSION OF METALLIC MATERIALS UNDER CORROSION LOAD BY WATER INSIDE OF TUBES, TANKS AND APPARATUS; EVALUATION OF THE CORROSION LIKELIHOOD OF HOT DIP IRON MATERIALS |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| EN 22063 : 1993 | METALLIC AND OTHER INORGANIC COATINGS - THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.