BS EN ISO 11611:2015
Current
The latest, up-to-date edition.
Protective clothing for use in welding and allied processes
Hardcopy , PDF
English
31-07-2015
Committee |
PH/3/2
|
DevelopmentNote |
Supersedes BS EN 470-1 and 00/565179 DC. (02/2008) Supersedes 11/30239233 DC. (08/2015)
|
DocumentType |
Standard
|
Pages |
30
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This International Standard specifies minimum basic safety requirements and test methods for protective clothing including hoods, aprons, sleeves, and gaiters that are designed to protect the wearer’s body including head (hoods) and feet (gaiters) and that are to be worn during welding and allied processes with comparable risks. For the protection of the wearer’s head and feet, this International Standard is only applicable to hoods and gaiters. This International Standard does not cover requirements for feet, hand, face, and/or eye protectors. This type of protective clothing is intended to protect the wearer against spatter (small splashes of molten metal), short contact time with flame, radiant heat from an electric arc used for welding and allied processes, and minimizes the possibility of electrical shock by short-term, accidental contact with live electrical conductors at voltages up to approximately 100V d. c. in normal conditions of welding. Sweat, soiling, or other contaminants can affect the level of protection provided against short-term accidental contact with live electric conductors at these voltages. For adequate overall protection against the risks to which welders are likely to be exposed, personal protective equipment (PPE) covered by other International Standards should additionally be worn to protect the head, face, hands, and feet. Guidance for the selection of the type of welders clothing for different welding activities is detailed in AnnexA.
Standards | Relationship |
DIN EN ISO 11611:2015-11 | Identical |
NS EN ISO 11611 : 2007 | Identical |
EN ISO 11611:2015 | Identical |
I.S. EN ISO 11611:2015 | Identical |
ISO 11611:2015 | Identical |
NEN EN ISO 11611 : 2015 | Identical |
SN EN ISO 11611:2015 | Identical |
NF EN ISO 11611 : 2015 | Identical |
NBN EN ISO 11611 : 2015 | Identical |
UNI EN ISO 11611 : 2008 | Identical |
12/30258581 DC : 0 | BS 5908-2 - FIRE AND EXPLOSION PRECAUTIONS AT PREMISES HANDLING FLAMMABLE GASES, LIQUIDS AND DUSTS - PART 2: GUIDE TO APPLICABLE STANDARDS AND REGULATIONS |
BS 5908-2:2012 | Fire and explosion precautions at premises handling flammable gases, liquids and dusts Guide to applicable standards and regulations |
ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
ISO 3175-2:2010 | Textiles Professional care, drycleaning and wetcleaning of fabrics and garments Part 2: Procedure for testing performance when cleaning and finishing using tetrachloroethene |
ISO 4045:2008 | Leather Chemical tests Determination of pH |
ISO 9150:1988 | Protective clothing Determination of behaviour of materials on impact of small splashes of molten metal |
ISO 6330:2012 | Textiles Domestic washing and drying procedures for textile testing |
ISO 13688:2013 | Protective clothing — General requirements |
ISO 6942:2002 | Protective clothing — Protection against heat and fire — Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat |
ISO 13935-2:2014 | Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method |
ISO 13938-2:1999 | Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension |
ISO 15025:2016 | Protective clothing Protection against flame Method of test for limited flame spread |
ISO 2589:2016 | Leather Physical and mechanical tests Determination of thickness |
IEC 60974-1:2017 | Arc welding equipment - Part 1: Welding power sources |
ISO/TR 2801:2007 | Clothing for protection against heat and flame General recommendations for selection, care and use of protective clothing |
ISO 3071:2005 | Textiles Determination of pH of aqueous extract |
ISO 17227:2002 | Leather — Physical and mechanical tests — Determination of dry heat resistance of leather |
EN 1149-2:1997 | Protective clothing - Electrostatic properties - Part 2: Test method for measurement of the electrical resistance through a material (vertical resistance) |
ISO 4048:2008 | Leather Chemical tests Determination of matter soluble in dichloromethane and free fatty acid content |
ISO 17075:2007 | Leather Chemical tests Determination of chromium(VI) content |
ISO 15797:2002 | Textiles Industrial washing and finishing procedures for testing of workwear |
ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
ISO 3376:2011 | Leather Physical and mechanical tests Determination of tensile strength and percentage extension |
ISO 3377-1:2011 | Leather — Physical and mechanical tests — Determination of tear load — Part 1: Single edge tear |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.