BS EN 771-6 : 2011
Current
The latest, up-to-date edition.
SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS
Hardcopy , PDF
English
01-01-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Materials of natural stone
5 Requirements for natural stone masonry units
6 Description
designation and classification of
natural stone masonry units
7 Marking
8 Assessment and verification of constancy of
performance (AVCP)
Annex A (normative) - Sampling for type testing
and for independent testing of consignment
Annex B (informative) - Guidance for test frequencies
for designing a FPC system to demonstrate conformity
of finished products with the requirements of
the standard and the declaration of the manufacturer
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of the EU Construction
Products Regulation
Bibliography
Describes the characteristics and performance requirements of masonry units manufactured from natural stone the width of which is equal to or greater than 80 mm, for which the main intended uses are common, facing or exposed masonry units in load bearing or non-load bearing building and civil engineering applications.
| Committee |
B/519/1
|
| DevelopmentNote |
Supersedes 92/14980 DC. (09/2002) Supersedes 01/104607 DC. (01/2006) Supersedes 10/30203906 DC. (11/2011) 2011 Edition Re-Issued in March 2016 & incorporates AMD 1 2015. Supersedes 14/30266139 DC. (04/2016)
|
| DocumentType |
Standard
|
| Pages |
38
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 771-6:2012 | Identical |
| UNI EN 771-6 : 2011 | Identical |
| NBN EN 771-6 : 2011 + A1 2015 | Identical |
| EN 771-6:2011+A1:2015 | Identical |
| NEN EN 771-6 : 2011 + A1 2015 | Identical |
| NF EN 771-6 : 2011 + A1 2015 | Identical |
| I.S. EN 771-6:2011 | Identical |
| NS EN 771-6 : 2011 + A1 2015 | Identical |
| DIN EN 771-6:2015-11 | Identical |
| SN EN 771-6 : 2011 + A1 2015 | Identical |
| 05/30136143 DC : DRAFT JUL 2005 | BS 5628-2 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
| BS 8004:2015 | Code of practice for foundations |
| BS 8002:2015 | Code of practice for earth retaining structures |
| 05/30131954 DC : DRAFT APR 2005 | BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP |
| 04/30126043 DC : DRAFT DEC 2004 | BS 5628-1 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 1: STRUCTURAL USE OF UNREINFORCED MASONRY |
| 04/30104570 DC : DRAFT APR 2004 | BS 8103-2 - STRUCTURAL DESIGN OF LOW RISE BUILDINGS - PART 2: CODE OF PRACTICE FOR MASONRY WALLS FOR HOUSING |
| BS 5628-2:2005 | CODE OF PRACTICE FOR THE USE OF MASONRY - PART 2: STRUCTURAL USE OF REINFORCED AND PRESTRESSED MASONRY |
| BS 5628-3:2005 | Code of practice for the use of masonry Materials and components, design and workmanship |
| BS 5628-1:2005 | Code of practice for the use of masonry Structural use of unreinforced masonry |
| 10/30168896 DC : 0 | PD 6697 - RECOMMENDATIONS FOR THE DESIGN OF MASONRY STRUCTURES TO BS EN 1996-1-1 AND BS EN 1996-2 |
| 15/30301518 DC : 0 | BS 8002 - CODE OF PRACTICE FOR EARTH RETAINING STRUCTURES |
| BS 8103-2:2005 | Structural design of low rise buildings Code of practice for masonry walls for housing |
| PD 6697:2010 | Recommendations for the design of masonry structures to BS EN 1996-1-1 and BS EN 1996-2 |
| EN 771-3:2011+A1:2015 | Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates) |
| EN 998-2:2016 | Specification for mortar for masonry - Part 2: Masonry mortar |
| EN 771-4:2011+A1:2015 | Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units |
| EN 1936:2006 | Natural stone test methods - Determination of real density and apparent density, and of total and open porosity |
| ISO 12491:1997 | Statistical methods for quality control of building materials and components |
| EN 13373:2003 | Natural stone test methods - Determination of geometric characteristics on units |
| EN 772-1:2011+A1:2015 | Methods of test for masonry units - Part 1: Determination of compressive strength |
| EN 1745:2012 | Masonry and masonry products - Methods for determining thermal properties |
| EN 12371:2010 | Natural stone test methods - Determination of frost resistance |
| EN 12407:2007 | Natural stone test methods - Petrographic examination |
| ISO 12572:2016 | Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
| EN 772-16:2011 | Methods of test for masonry units - Part 16: Determination of dimensions |
| EN ISO 12572:2016 | Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
| EN 1996-1-1:2005+A1:2012 | Eurocode 6 - Design of masonry structures - Part 1-1: General rules for reinforced and unreinforced masonry structures |
| EN 12440:2017 | Natural stone - Denomination criteria |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| EN 771-1:2011+A1:2015 | Specification for masonry units - Part 1: Clay masonry units |
| EN 12372:2006 | Natural stone test methods - Determination of flexural strength under concentrated load |
| EN 772-11:2011 | Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action and the initial rate of water absorption of clay masonry units |
| EN 771-5:2011+A1:2015 | Specification for masonry units - Part 5: Manufactured stone masonry units |
| EN 771-2:2011+A1:2015 | Specification for masonry units - Part 2: Calcium silicate masonry units |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.