BS EN 62884-1:2017
Current
The latest, up-to-date edition.
Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement
Hardcopy , PDF
English
04-10-2017
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Test and measurement procedures
Bibliography
Annex ZA (normative) - Normative references to
international publications
with their corresponding
European publications
Defines the measurement techniques for piezoelectric, dielectric and electrostatic oscillators, including Dielectric Resonator Oscillators (DROs) and oscillators using FBAR (hereinafter referred to as 'Oscillator').
Committee |
W/-
|
DevelopmentNote |
Supersedes 15/30325282 DC. (10/2017)
|
DocumentType |
Standard
|
Pages |
68
|
PublisherName |
British Standards Institution
|
Status |
Current
|
Supersedes |
This part of IEC 62884 specifies the measurement techniques for piezoelectric, dielectric and electrostatic oscillators, including Dielectric Resonator Oscillators (DROs) and oscillators using FBAR (hereinafter referred to as \'Oscillator\').
NOTE Dielectric Resonator Oscillators (DROs) and oscillators using FBAR are under consideration.
Standards | Relationship |
IEC 62884-1:2017 | Identical |
EN 62884-1:2017 | Identical |
EN 61029-1:2009/A11:2010 | Identical |
ISO 80000-4:2006 | Quantities and units Part 4: Mechanics |
EN 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
EN ISO 80000-1:2013 | Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) |
IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
IEC 60068-2-58:2015+AMD1:2017 CSV | Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) |
IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
EN 60068-2-20:2008 | Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads |
EN 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
IEC 61837-1:2012 | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 1: Plastic moulded enclosure outlines |
IEC 60679-4:1997 | Quartz crystal controlled oscillators of assessed quality - Part 4: Sectional Specification - Capability approval |
EN 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 60469:2013 | Transitions, pulses and related waveforms - Terms, definitions and algorithms |
IEC 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 60068-2-13:1983 | Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure |
EN 60068-1:2014 | Environmental testing - Part 1: General and guidance |
IEC 61837-2:2011+AMD1:2014 CSV | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part2: Ceramic enclosures |
EN 60068-2-64:2008 | ENVIRONMENTAL TESTING - PART 2-64: TESTS - TEST FH: VIBRATION, BROADBAND RANDOM AND GUIDANCE |
IEC TR 60068-3-12:2014 | Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder reflow temperature profile |
IEC 60679-5:1998 | Quartz crystal controlled oscillators of assessed quality - Part 5: Sectional specification - Qualification approval |
IEC 61837-4:2015 | Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections - Part 4: Hybrid enclosure outlines |
IEC 60749-27:2006+AMD1:2012 CSV | Semiconductor devices - Mechanical and climatic test methods - Part27: Electrostatic discharge (ESD) sensitivity testing - Machine model (MM) |
IEC 61019-1:2004 | Surface acoustic wave (SAW) resonators - Part 1: Generic specification |
EN 60068-2-7:1993 | Environmental testing - Part 2: Tests - Test Ga: Acceleration, steady state |
IEC 60068-2-31:2008 | Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens |
IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
EN 60068-2-27:2009 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
IEC 61019-2:2005 | Surface acoustic wave (SAW) resonators - Part 2: Guide to the use |
EN 60068-2-17:1994 | Environmental testing - Part 2: Tests - Test Q: Sealing |
IEC 60749-26:2013 | Semiconductor devices - Mechanical and climatic test methods - Part 26: Electrostatic discharge (ESD) sensitivity testing - Human body model (HBM) |
IEC 60068-2-17:1994 | Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing |
IEC 60068-2-10:2005 | Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth |
EN 60068-2-21:2006 | Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices |
IEC 60068-2-2:2007 | Environmental testing - Part 2-2: Tests - Test B: Dry heat |
IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
ISO 80000-1:2009 | Quantities and units — Part 1: General |
EN 60068-2-78:2013 | Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state |
EN 60068-2-13:1999 | Environmental testing - Part 2: Tests - Test M: Low air pressure |
EN 60068-2-6:2008 | Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) |
IEC 60050-561:2014 | International Electrotechnical Vocabulary (IEV) - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection |
IEC 60122-1:2002 | Quartz crystal units of assessed quality - Part 1: Generic specification |
IEC 60748-2:1997 | Semiconductor devices - Integrated circuits - Part 2: Digital integrated circuits |
IEC 60068-2-1:2007 | Environmental testing - Part 2-1: Tests - Test A: Cold |
IEC 60679-3:2012 | Quartz crystal controlled oscillators of assessed quality - Part 3: Standard outlines and lead connections |
IEC 60679-2:1981 | Quartz crystal controlled oscillators - Part 2: Guide to the use of quartz crystal controlled oscillators |
EN 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
IEC 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
IEC 60679-1:2017 | Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1: Generic specification |
EN 60068-2-45:1992/A1:1993 | Environmental testing - Part 2: Tests - Test Xa and guidance: Immersion in cleaning solvents |
EN 60068-2-14:2009 | Environmental testing - Part 2-14: Tests - Test N: Change of temperature |
IEC 60068-2-52:2017 | Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) |
EN 60068-2-31:2008 | ENVIRONMENTAL TESTING - PART 2-31: TESTS - TEST EC: ROUGH HANDLING SHOCKS, PRIMARILY FOR EQUIPMENT-TYPE SPECIMENS |
IEC 60068-2-30:2005 | Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.