BS EN 62326-1:2002
Current
The latest, up-to-date edition.
Printed boards Generic specification
Hardcopy , PDF
English
16-08-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 General
3.1 General considerations
3.2 Structure of the specification series
4 Particular stipulations
4.1 Primary stage of manufacture
4.2 Structurally similar printed boards
4.3 Certified Records (CR) of released lots
4.4 Delayed delivery
4.5 Release for delivery before the completion of
all tests
4.6 Resubmission of rejected lots
4.7 Marking of printed board and package
4.8 Ordering information
5 Capability approval and maintenance of capability
approval
5.1 General
5.2 Capability approval requirements
5.3 Description of capability
5.4 Register of Firms, Products and Services
Information (RFPS)
5.5 Demonstration of capability
5.6 Capability approval test report
5.7 Range of capability approval
5.8 Maintenance of capability approval
5.9 Suspension and withdrawal of capability approval
5.10 Capability approval testing
5.11 Inspection of information in the Cap DS
6 Quality assessment
6.1 Quality conformance inspection
6.2 Grouping of tests
6.3 Inspection information in the CDS
6.4 In-process testing and control
6.5 Indirect measuring methods/process parameter
control
7 Rules for the preparation of detail specifications
7.1 Capability Detail Specification (Cap DS)
7.2 Customer Detail Specification (CDS)
Annex A (informative) Examples of a CDS check list
Annex B (informative) Future Structure of the specification
series
Annex C (informative) Structure of the capability
qualifying component (CQC)
Annex D (informative) Abbreviations and acronyms related to
IECQ and their explanations
Annex E (informative) Guide to the form and content of a
capability manual
Annex F (informative) Example of process description
Annex G (informative) Example of limits of approval
Annex H (informative) Example of description of capability
Annex I (informative) Example of manufacturer-to-customer
interface
Annex J (informative) Example of CQC detail specification
Annex K (informative) Example of test programme matrix
Annex L (informative) Example of test programme schedule
Annex M (normative) Requirements for capability approval
test reports
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Tables
Specifies capability approval (CA) procedures for printed boards, the information and requirements may also be used for second-party approvals or for self-declaration by a manufacturer of products.
| Committee |
EPL/501
|
| DevelopmentNote |
Supersedes 98/233325 DC (09/2002)
|
| DocumentType |
Standard
|
| Pages |
56
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
Defines capability approval procedures for printed boards. In addition, a technology approval schedule may also be provided as an alternative for manufacturers employing a system of process control for establishing product conformity. Both CA and TA procedures apply to printed boards irrespective of their methods of manufacture, when they are ready for the mounting of components.
| Standards | Relationship |
| NBN EN 62326-1 : 2003 | Identical |
| DIN EN 62326-1:2002-12 | Identical |
| IEC 62326-1:2002 | Identical |
| UNE-EN 62326-1:2004 | Identical |
| EN 62326-1:2002 | Identical |
| NF EN 62326-1 : 2002 | Identical |
| I.S. EN 62326-1:2002 | Identical |
| SN EN 62326-1 : 1997 | Identical |
| IEC 61249-2-12:1999 | Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper-clad |
| IEC 61249-2-7:2002 | Materials for printed boards and other interconnecting structures - Part 2-7: Reinforced base materials clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad |
| EN 62326-4-1:1997 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification - Section 1: Capability Detail Specification - Performance levels A, B and C |
| EN 61249-2-7:2002/corrigendum:2005 | MATERIALS FOR PRINTED BOARDS AND OTHER INTERCONNECTING STRUCTURES - PART 2-7: REINFORCED BASE MATERIALS CLAD AND UNCLAD - EPOXIDE WOVEN E-GLASS LAMINATED SHEET OF DEFINED FLAMMABILITY (VERTICAL BURNING TEST), COPPER-CLAD |
| EN 61189-3:2008 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
| EN 61249-2-4:2002 | Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 61189-3:2007 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 3: Test methods for interconnection structures (printed boards) |
| EN 61249-2-12:1999 | Materials for printed boards and other interconnecting structures - Part 2-12: Sectional specification set for reinforced base materials, clad and unclad - Epoxide non-woven aramid laminate of defined flammability, copper-clad |
| IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
| ISO 9001:2015 | Quality management systems — Requirements |
| IEC 61249-2-4:2001 | Materials for printed boards and other interconnecting structures - Part 2-4: Reinforced base materials, clad and unclad - Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad |
| IEC 61182-1:1994 | Printed boards - Electronic data description and transfer - Part 1: Printed board description in digital form |
| EN 62326-4:1997 | Printed boards - Part 4: Rigid multilayer printed boards with interlayer connections - Sectional specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.