BS EN 61924:2006
Current
The latest, up-to-date edition.
Maritime navigation and radiocommunication equipment and systems. Integrated navigation systems. Operational and performance requirements, methods of testing and required test results
Hardcopy , PDF
English
31-07-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
INTRODUCTION
1 Scope
2 Normative references
3 Terms, definitions and abbreviations
4 Functional requirements and application
4.1 General
4.2 Basic functions
4.3 Functional integration
4.4 Interfacing and data exchange
4.5 Accuracy and performance
4.6 Consistent common reference system (CCRS)
4.7 Integrity monitoring
4.8 Marking of data
4.9 Generation of alarms and warnings
4.10 INS display
4.11 Configuration display
4.12 Malfunctions
4.13 INS alarm management
4.14 Human machine interface (HMI)
4.15 Power supply
4.16 Failure analysis
4.17 Quality assurance
4.18 Manuals
5 Requirements applicable to INS(A)
6 Requirements applicable to INS(B)
6.1 General
6.2 Route planning and route monitoring
7 Requirements applicable to INS(C)
7.1 Heading or track control system
7.2 Operator control and display functions
7.3 Reversionary mode
8 Test requirements and results
8.1 General
8.2 Exceptions for tests previously performed
8.3 Test site
8.4 Documentation check
8.5 Compliance tests
Annex A (normative) IMO Resolution MSC 86(70) Annex 3
(adopted on 8 December 1998) Recommendation on
performance standards for an integrated navigation
system (INS)
Annex B (informative) Data flow diagram/consistent common
reference system (CCRS)
Annex C (normative) IEC 61162 output interfaces
Annex D (informative) Alarm and warning conditions
Annex ZA (normative) Normative references to international
publications with there corresponding European
publications
Describes the minimum requirements for the design, manufacture, integration, methods of testing and required test results for an integrated navigation system (INS) to comply with the International Maritime Organization (IMO) requirements of Resolution MSC 86(70) Annex 3.
| Committee |
EPL/80
|
| DevelopmentNote |
Supersedes 00/202803 DC (07/2006)
|
| DocumentType |
Standard
|
| Pages |
60
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
Specifies the minimum requirements for the design, manufacture, integration, methods of testing and required test results for an integrated navigation system (INS) to comply with the International Maritime Organization (IMO) requirements of Resolution MSC 86(70) Annex 3. Aims to resolve conflicts that may occur from the differences in the requirements of the relevant IMO Performance Standards for individual navigational aids when forming part of the INS.
| Standards | Relationship |
| DIN EN 61924:2007-02 | Identical |
| NBN EN 61924 : 2006 | Identical |
| IEC 61924:2006 | Identical |
| I.S. EN 61924:2006 | Identical |
| SN EN 61924 : 2006 | Identical |
| EN 61924:2006 | Identical |
| NF EN 61924 : 2006 | Identical |
| IEC 61174:2015 | Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results |
| IEC 61162-1:2016 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners |
| IEC 61209:1999 | Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results |
| EN 61162-1:2016 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 1: Single talker and multiple listeners |
| EN 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| EN 61209:1999 | Maritime navigation and radiocommunication equipment and systems - Integrated bridge systems (IBS) - Operational and performance requirements, methods of testing and required test results |
| IEC 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
| IEC 62065:2014 | Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results |
| ISO 11674:2006 | Ships and marine technology Heading control systems |
| EN 61174:2015 | Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results |
| IEC 61162-2:1998 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission |
| EN 61162-2:1998 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission |
| EN 62065:2014 | Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.