BS EN 614-1 : 2006
Current
Current
The latest, up-to-date edition.
SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES
Amended by
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-01-2006
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General principles
4.1 General
4.2 Accessible design for people with special
requirements
4.3 Taking account of people's body dimensions, postures,
body movements, and physical strength
4.4 Taking account of people's mental abilities
4.5 Taking account of the influence of the physical work
environment on people
5 Incorporating ergonomic principles into the design
process of machinery
5.1 General
5.2 Ergonomics tasks to be performed during the design
process of machinery
Annex A (informative) - Guidelines for the use of the 3-zone
rating system
A.1 Introduction
A.2 Definition and use of the 3-zone rating system
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC, amended by 98/79/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Specifies the ergonomic principles to be followed during the process of design of machinery.
| Committee |
PH/9
|
| DevelopmentNote |
Supersedes 92/35512 DC (11/2005) Supersedes 03/300531 DC (05/2006) 2006 Edition Re-Issued in October 2009 & incorporates AMD 1 2009. (10/2009)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 614-1:2006+A1:2009 | Identical |
| NBN EN 614-1 : 2006 + A1 2009 | Identical |
| DIN EN 614-1:2009-06 | Identical |
| UNI EN 614-1 : 2009 | Identical |
| UNE-EN 614-1:2006 | Identical |
| I.S. EN 614-1:2006 | Identical |
| NEN EN 614-1 : 2006 + A1 2009 | Identical |
| NS EN 614-1 : 2006 + A1 2009 | Identical |
| NF EN 614-1 : 2006 + A1 2009 | Identical |
| SN EN 614-1+A1:2009 | Identical |
| BS EN 954-1:1997 | Safety of machinery. Safety related parts of control systems General principles for design |
| DEFSTAN 00-250(PT3)SEC1-7/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTIONS 1-7 - OVERALL CONTENTS/SCOPE |
| DEFSTAN 00-250(PT1)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 1: OVERARCHING PEOPLE-RELATED REQUIREMENTS |
| DEFSTAN 00-250(PT3)SEC11/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 11 - TRAINING |
| DEFSTAN 00-250(PT3)SEC13/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 13 - THE WORKPLACE |
| DEFSTAN 00-250(PT3)SEC8/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 8 - PEOPLE IN SYSTEMS |
| DEFSTAN 00-250(PT3)SEC9/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 9 - PEOPLE CHARACTERISTICS |
| DEFSTAN 00-250(PT3)SEC10/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 10 - SYSTEMS SAFETY |
| DEFSTAN 00-250(PT3)SEC15/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 15 - WORK EQUIPMENT |
| DEFSTAN 00-250(PT3)SEC12/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 12 - OPERATIONS, MAINTENANCE & SUPPORT |
| DEFSTAN 00-250(PT3)SEC16/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 16 - LIVING SPACES |
| DEFSTAN 00-250(PT2)/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 2: PARTICULAR PEOPLE-RELATED REQUIREMENTS |
| DEFSTAN 00-250(PT3)SEC14/1(2008) : 2008 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 3: TECHNICAL GUIDANCE - SECTION 14 - THE ENVIRONMENT |
| DEFSTAN 00-25(PT21)/1(2004) : 2004 | HUMAN FACTORS FOR DESIGNERS OF SYSTEMS - PART 21: SYSTEM SAFETY DOMAIN |
| BS 6739:2009 | Code of practice for instrumentation in process control systems: installation design and practice |
| 08/30136724 DC : DRAFT MAY 2008 | BS 6739 - CODE OF PRACTICE FOR INSTRUMENTATION IN PROCESS CONTROL SYSTEMS - INSTALLATION DESIGN AND PRACTICE |
| EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
| ISO 10075-2:1996 | Ergonomic principles related to mental workload — Part 2: Design principles |
| EN ISO 9241-110:2006 | Ergonomics of human-system interaction - Part 110: Dialogue principles (ISO 9241-110:2006) |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| EN ISO 10075-1:2017 | Ergonomic principles related to mental workload - Part 1: General issues and concepts, terms and definitions (ISO 10075-1:2017) |
| ISO 5349-2:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
| ISO 9241-110:2006 | Ergonomics of human-system interaction Part 110: Dialogue principles |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| EN 981:1996+A1:2008 | Safety of machinery - System of auditory and visual danger and information signals |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| EN 894-2:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays |
| EN ISO 11064-6:2005 | Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005) |
| CEN/CLC Guide 6:2014 | Guide for addressing accessibility in standards |
| ISO 3411:2007 | Earth-moving machinery Physical dimensions of operators and minimum operator space envelope |
| EN ISO 3411:2007 | Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007) |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 614-2:2000+A1:2008 | Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks |
| EN ISO 10075-3:2004 | Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload (ISO 10075-3:2004) |
| EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
| EN 1837:1999+A1:2009 | Safety of machinery - Integral lighting of machines |
| EN ISO 10075-2:2000 | Ergonomic principles related to mental workload - Part 2: Design principles (ISO 10075-2:1996) |
| ISO 14738:2002 | Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
| ISO 11064-4:2013 | Ergonomic design of control centres — Part 4: Layout and dimensions of workstations |
| EN ISO 7731:2008 | Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) |
| EN ISO 11064-7:2006 | Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres (ISO 11064-7:2006) |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
| ISO 11064-6:2005 | Ergonomic design of control centres — Part 6: Environmental requirements for control centres |
| ISO 7731:2003 | Ergonomics Danger signals for public and work areas Auditory danger signals |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN ISO 15537:2004 | Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537:2004) |
| ISO 10075-3:2004 | Ergonomic principles related to mental workload — Part 3: Principles and requirements concerning methods for measuring and assessing mental workload |
| EN ISO 15536-1:2008 | Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005) |
| EN ISO 5349-1:2001 | Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements (ISO 5349-1:2001) |
| EN 1005-5:2007 | Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
| EN ISO 11064-4:2013 | Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013) |
| EN 547-3:1996+A1:2008 | Safety of machinery - Human body measurements - Part 3: Anthropometric data |
| EN ISO 6385:2016 | Ergonomics principles in the design of work systems (ISO 6385:2016) |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN ISO 6682:2008 | Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989) |
| EN ISO 13732-3:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005) |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 5349-1:2001 | Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
| ISO 15536-1:2005 | Ergonomics Computer manikins and body templates Part 1: General requirements |
| ISO 13732-3:2005 | Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 15537:2004 | Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs |
| ISO 10075:1991 | Ergonomic principles related to mental work-load General terms and definitions |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 6385:2016 | Ergonomics principles in the design of work systems |
| EN ISO 14738:2008 | Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) |
| ISO 11064-7:2006 | Ergonomic design of control centres — Part 7: Principles for the evaluation of control centres |
| EN 894-1:1997+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.