BS EN 61249-2-6:2003
Current
The latest, up-to-date edition.
Materials for printed boards and other interconnecting structures Reinforced base materials, clad and unclad - Brominated epoxide non-woven/woven E-glass glass reinforced laminated sheets of defined flammability (vertical burning test), copper-clad
Hardcopy , PDF
English
31-08-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Materials and construction
3.1 Resin system
3.2 Reinforcement
3.3 Metal foil
4 Internal marking
5 Electrical properties
6 Non-electrical properties of the copper clad laminate
6.1 Appearance of the copper clad sheet
6.2 Appearance of the unclad face
6.3 Laminate thickness
6.4 Bow and twist
6.5 Properties related to the copper foil bond
6.6 Punching and machining
6.7 Dimensional stability
6.8 Sheet size
6.9 Cut panels
7 Non-electrical properties of the base material after complete
removal of the copper foil
7.1 Appearance of the dielectric base material
7.2 Flexural strength
7.3 Flammability
7.4 Water absorption
7.5 Measling
7.6 Glass transition temperature and cure factor
8 Quality assurance
8.1 Quality system
8.2 Responsibility for inspection
8.3 Qualification inspection
8.4 Quality conformance inspection
8.5 Certificate of conformance
8.6 Safety data sheet
9 Packaging and marking
10 Ordering information
Annex A (informative) Engineering information
Annex B (informative) Common laminate constructions
Annex C (informative) Guideline for qualification and conformance
inspection
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Bibliography
Specifies requirements for properties of brominated epoxide non-woven/woven reinforced E-glass laminated sheets of defined flammability, copper-clad in thicknesses of 0,80 mm up to 1,70 mm.
| Committee |
EPL/501
|
| DevelopmentNote |
Supersedes 01/206641 DC (11/2004)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 61249-2-6 : 2004 | Identical |
| EN 61249-2-6:2003/corrigendum:2005 | Identical |
| UNE-EN 61249-2-6:2005 | Identical |
| DIN EN 61249-2-6:2004-06 | Identical |
| IEC 61249-2-6:2003 | Identical |
| I.S. EN 61249-2-6:2005/AC:2005 | Identical |
| EN 61249-5-1:1996 | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with or without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) |
| ISO 11014-1:1994 | Safety data sheet for chemical products Part 1: Content and order of sections |
| IEC 61249-5-1:1995 | Materials for interconnection structures - Part 5: Sectional specification set for conductive foils and films with and without coatings - Section 1: Copper foils (for the manufacture of copper-clad base materials) |
| ISO 14001:2015 | Environmental management systems — Requirements with guidance for use |
| IEC 60194:2015 | Printed board design, manufacture and assembly - Terms and definitions |
| EN ISO 14001:2015 | Environmental management systems - Requirements with guidance for use (ISO 14001:2015) |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| IEC 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| EN 61189-2:2006 | Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.