BS EN 60794-4-10:2014
Current
The latest, up-to-date edition.
Optical fibre cables Family specification. Optical ground wires (OPGW) along electrical power lines
Hardcopy , PDF
English
31-01-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
GEL/86/1
|
| DevelopmentNote |
Supersedes 03/320270 DC. (06/2007) Supersedes 13/30292534 DC. (01/2015)
|
| DocumentType |
Standard
|
| Pages |
26
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of IEC60794‑4 , which is a family specification, covers cable construction, test methods and optical, mechanical, environmental and electrical performance requirements for OPGW (optical ground wire) which is used for the protection of electrical power lines against atmospheric discharges or short-circuits and, at the same time, as a high bandwidth transport media for communications-and-control optical signals. The corresponding environmental declaration may be built according to IECTR62839‑1 . The OPGW is a substitute for a conventional ground-/shield-wire containing optical fibres for control and/or telecommunication purposes. Usually the fibres are embedded loosely in protective buffer tubes. To fulfil mechanical and electrical requirements; an armouring of one or more layers with aluminium, aluminium alloy, and aluminium clad steel, galvanized steel or a mixture of them is helically stranded. If the construction contains an aluminium tube or an aluminium slotted core, this cross section is considered as a conductive part.
| Standards | Relationship |
| DIN EN 60794-4-10 : 2015 | Identical |
| NBN EN 60794-4-10 : 2015 | Identical |
| NF EN 60794-4-10 : 2007 | Identical |
| EN 60794-4-10:2014 | Identical |
| I.S. EN 60794-4-10:2014 | Identical |
| IEC 60794-4-10:2014 | Identical |
| EN 60255-26:2009 | Identical |
| EN 60794-1-23:2012 | OPTICAL FIBRE CABLES - PART 1-23: GENERIC SPECIFICATION - BASIC OPTICAL CABLE TEST PROCEDURES - CABLE ELEMENT TEST METHODS (IEC 60794-1-23:2012) |
| IEC 61395:1998 | Overhead electrical conductors - Creep test procedures for stranded conductors |
| EN 61394:2011 | Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors |
| EN 60793-1-44:2011 | OPTICAL FIBRES - PART 1-44: MEASUREMENT METHODS AND TEST PROCEDURES - CUT-OFF WAVELENGTH |
| IEC 60793-1-44:2011 | Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength |
| IEC 61394:2011 | Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors |
| EN 60793-2-50:2016 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| IEC 60304:1982 | Standard colours for insulation for low-frequency cables and wires |
| EN 60794-1-1:2016 | Optical fibre cables - Part 1-1: Generic specification - General |
| IEC TR 62839-1:2014 | Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules |
| IEC 60794-4:2003 | Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines |
| IEC 60888:1987 | Zinc-coated steel wires for stranded conductors |
| IEC 60794-4-10:2014 | Optical fibre cables - Part 4-10: Family specification - Optical ground wires (OPGW) along electrical power lines |
| IEC 60794-1-1:2015 | Optical fibre cables - Part 1-1: Generic specification - General |
| EN 60793-1-40:2003 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
| IEC 60104:1987 | Aluminium-magnesium-silicon alloy wire for overhead line conductors |
| IEC 60794-1-24:2014 | Optical fibre cables - Part 1-24: Generic specification - Basic optical cable test procedures - Electrical test methods |
| EN 60889:1997 | Hard-drawn aluminium wire for overhead line conductors |
| IEC 60889:1987 | Hard-drawn aluminium wire for overhead line conductors |
| IEC 60793-1-40:2001 | Optical fibres - Part 1-40: Measurement methods and test procedures - Attenuation |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| IEC 60794-1-22:2017 | Optical fibre cables - Part 1-22: Generic specification - Basic optical cable test procedures - Environmental test methods |
| ISO 9001:2015 | Quality management systems — Requirements |
| IEC 60793-2-50:2015 | Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres |
| HD 402 : 200S2 | STANDARD COLOURS FOR INSULATION FOR LOW-FREQUENCY CABLES AND WIRES |
| EN 60794-1-20:2014 | Optical fibre cables - Part 1-20: Generic specification - Basic optical cable test procedures - General and definitions |
| EN 60794-4:2003 | Optical fibre cables - Part 4: Sectional specification - Aerial optical cables along electrical power lines |
| IEC 61232:1993 | Aluminium-clad steel wires for electrical purposes |
| EN 61395:1998 | Overhead electrical conductors - Creep test procedures for stranded conductors |
| EN 61232:1995/A11:2000 | ALUMINIUM CLAD STEEL WIRES FOR ELECTRICAL PURPOSES |
| IEC 60794-1-23:2012 | Optical fibre cables - Part 1-23: Generic specification - Basic optical cable test procedures - Cable element test methods |
| IEC 60794-1-21:2015 | Optical fibre cables - Part 1-21: Generic specification - Basic optical cable test procedures - Mechanical tests methods |
| IEC 60793-1-48:2017 | Optical fibres - Part 1-48: Measurement methods and test procedures - Polarization mode dispersion |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.