BS EN 607:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Eaves gutters and fittings made of PVC-U. Definitions, requirements and testing
Hardcopy , PDF
26-05-2023
English
26-09-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
3.1 eaves gutter
3.2 down-pipe
3.3 union-clip (gutter-union)
3.4 joint bracket (union-bracket)
3.5 gutter adaptor
3.6 angle
3.7 stop end
3.8 outlet
3.9 commercial length
4 Material
4.1 Raw material
4.2 Utilisation of non virgin material
5 General characteristics of profiles - Appearance
6 Geometrical characteristics of profiles
6.1 Width
6.2 Length
7 Physical and mechanical characteristics of profiles
8 General characteristics of fittings
8.1 General
8.2 Appearance
8.3 Shape and dimensions
9 Physical characteristics of fittings
10 Gutter sealing rings
11 Solvent cements
12 Designation
13 Marking
14 Fitness for purpose of gutter systems
15 Production control
Annex A (normative) Utilisation of non-virgin material
A.1 Material definitions
A.1.1 virgin material
A.1.2 own reprocessable material
A.1.3 external reprocessable material
A.1.4 recyclable material
A.2 Reprocessable and recyclable material
A.2.1 Own reprocessable material
A.2.2 External reprocessable and recyclable
materials with agreed specification
A.2.3 External reprocessable and recyclable
material not covered by an agreed
specification
Annex B (normative) Impact test
Annex C (normative) Heat reversion test for fittings
Annex D (normative) Watertightness test
Annex E (informative) Cross section areas
Bibliography
Specifies requirements and test methods of eaves gutters and fittings made from unplasticized polyvinyl chloride (PVC-U) and intended to be used for rainwater drainage.
| Committee |
PRI/88
|
| DevelopmentNote |
Supersedes 92/37684 DC. (08/2004) Together with BS EN 12200-1 and BS EN 1462, supersedes BS 4576-1(1989). (10/2007)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN 607 : 2005 | Identical |
| UNI EN 607 : 2005 | Identical |
| NBN EN 607 : 2005 | Identical |
| UNE-EN 607:2006 | Identical |
| NS EN 607 : 2ED 2004 | Identical |
| EN 607:2004 | Identical |
| DIN EN 607:2005-02 | Identical |
| NF EN 607 : 2005 | Identical |
| SN EN 607 : 2004 | Identical |
| I.S. EN 607:2004 | Identical |
| NEN EN 607 : 2004 | Identical |
| BS 5534(2014) : 2014 | SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| BS 5534(2003) : 2003 | CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| 13/30271503 DC : 0 | BS 5534 - SLATING AND TILING FOR PITCHED ROOFS AND VERTICAL CLADDING - CODE OF PRACTICE |
| 02/105033 DC : DRAFT AUG 2002 | BS 5534 - CODE OF PRACTICE FOR SLATING AND TILING (INCLUDING SHINGLES) |
| EN 12200-1:2016 | Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system |
| EN ISO 1183-3:1999 | Plastics - Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999) |
| EN ISO 8256:2004 | Plastics - Determination of tensile-impact strength (ISO 8256:2004) |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| EN ISO 527-2:2012 | Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
| ISO 8256:2004 | Plastics — Determination of tensile-impact strength |
| EN 743 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF THE LONGITUDINAL REVERSION |
| ISO 527-2:2012 | Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
| EN 763 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - INJECTION MOULDED THERMOPLASTICS FITTINGS - TEST METHOD FOR VISUALLY ASSESSING EFFECTS OF HEATING |
| EN 922:1994 | Plastics piping and ducting systems - Pipes and fittings of unplasticized poly(vinyl chloride) (PVC-U) - Specimen preparation for determination of the viscosity number and calculation of the K-value |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| EN 727:1994 | Plastics piping and ducting systems - Thermoplastics pipes and fittings - Determination of Vicat softening temperature (VST) |
| ISO 1183-3:1999 | Plastics Methods for determining the density of non-cellular plastics Part 3: Gas pyknometer method |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 638 : 1994 | PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| EN 1905:1998 | Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN 513:1999 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.