BS EN 60534-3-2:2001
Current
The latest, up-to-date edition.
Industrial-process control valves. Dimensions Face-to-face dimensions for rotary control valves except butterfly valves
Hardcopy , PDF
English
28-09-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Dimensions
5 Tolerances
Annex ZA (normative) Normative references to international
publications with their corresponding European
publications
Applies to the following control valves: - types: segmented ball and eccentric rotary control valves with or without flanges; - nominal sizes: DN20 up to and including DN400; - designations: PN10, PN16, PN20, PN25, PN40, PN50, PN63, PN100 and PN110.
| Committee |
GEL/65/2
|
| DevelopmentNote |
Supersedes BS 5793-3.2(1985) and 97/260570 DC. Also numbered as IEC 60534-3-2. (11/2001)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
Gives the overall lengths of following types: segmental ball, eccentric rotary plug, and barstock globe; wafer butterfly valves are excluded.
| Standards | Relationship |
| I.S. EN 60534-3-2:2000 | Identical |
| DIN EN 60534-3-2:2002-03 | Identical |
| NF EN 60534-3-2 : 2001 | Identical |
| EN 60534-3-2:2001 | Identical |
| SN EN 60534-3-2 : 2001 | Identical |
| IEC 60534-2:1978 | Industrial-process control valves. Part 2: Flow capacity. Section One: Sizing equations for incompressible fluid flow under installed conditions |
| ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
| IEC 60534-3-3:1998 | Industrial-process control valves - Part 3-3: Dimensions End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valves |
| IEC 60534-3-1:2000 | Industrial-process control valves - Part 3-1: Dimensions - Face-to-face dimensions for flanged, two-way, globe-type, straight pattern and centre-to-face dimensions for flanged, two-way, globe-type, angle pattern control valves |
| ISO 7005-3:1988 | Metallic flanges Part 3: Copper alloy and composite flanges |
| IEC 60534-2-2:1980 | Industrial-process control valves. Part 2: Flow capacity. Section Two: Sizing equations for compressible fluid flow under installed conditions |
| IEC 60534-6-1:1997 | Industrial-process control valves - Part 6: Mounting details for attachment of positioners to control valves - Section 1: Positioner mounting on linear actuators |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| IEC 60534-8-1:2005 | Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves |
| IEC 60534-3-2:2001 | Industrial-process control valves - Part 3-2: Dimensions - Face-to-face dimensions for rotary control valves except butterfly valves |
| IEC 60534-4:2006 | Industrial-process control valves - Part 4: Inspection and routine testing |
| IEC 60534-8-4:2015 | Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow |
| IEC 60534-8-2:2011 | Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves |
| IEC 60534-2-3:2015 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| IEC 60534-6-2:2000 | Industrial-process control valves - Part 6-2: Mounting details for attachment of positioners to control valves - Positioner mounting on rotary actuators |
| IEC 60534-7:2010 | Industrial-process control valves - Part 7: Control valve data sheet |
| IEC 60534-2-1:2011 | Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| IEC 60534-1:2005 | Industrial-process control valves - Part 1: Control valve terminology and general considerations |
| IEC 60534-5:2004 | Industrial-process control valves - Part 5: Marking |
| IEC 60534-8-3:2010 | Industrial-process control valves - Part 8-3: Noise considerations - Control valve aerodynamic noise prediction method |
| IEC 60534-3:1976 | Industrial-process control valves. Part 3: Dimensions - Section One: Face-to-face dimensions for flanged, two-way, globe-type control valves |
| IEC 60534-6:1985 | Industrial-process control valves. Part 6: Mounting details for attachment of positioners to control valve actuators |
| IEC 60534-2-4:2009 | Industrial-process control valves - Part 2-4: Flow capacity - Inherent flow characteristics and rangeability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.