BS EN 50207:2001
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Railway applications. Electronic power converters for rolling stock
Hardcopy , PDF
28-02-2007
English
15-05-2001
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Definitions
3.1 Definitions related to equipment
3.2 Definitions related to electrical parameters
4 Common clauses
4.1 General
4.2 Service conditions
4.3 Characteristics
4.4 Technical requirements
4.5 Tests
5 Direct traction converters
5.1 Line commutated converters for d.c. motors
5.2 Tests
5.3 Multiphase converters for a.c. motors (inverters)
6 Indirect traction converters
6.1 Line converter
6.2 Motor converter (inverter)
7 Auxiliary converters
7.1 Characteristics
7.2 Short-circuit protection
7.3 Choice of rated insulation voltage in presence of
isolating transformers
7.4 Tests
8 Semiconductors drive units (SDU)
Annex A (informative) Schemes of elementary converters
A.1 Types of converters
A.2 Rectifier
A.3 Chopper
A.4 Invertor
A.5 Block diagrams for line converters for different types
of the intermediate link
A.6 Arrangement of basic circuit diagrams
Annex B (informative) Recapitulation list of agreements between
the manufacturer and the user
Describes power electronic converters mounted on-board railway rolling-stock and intended for supplying: - traction circuits; - auxiliary circuits of power vehicles, coaches and trailers.
| Committee |
GEL/9
|
| DevelopmentNote |
Supersedes 95/215239 DC. (09/2005)
|
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 50207 : 2004 | Identical |
| DIN EN 50207 : 2001 | Identical |
| EN 50207:2000 | Identical |
| NEN EN 50207 : 2001 | Identical |
| SN EN 50207 : 2000 | Identical |
| NBN EN 50207 : 2001 | Identical |
| I.S. EN 50207:2000 | Identical |
| EN 61881:1999 | Railway applications - Rolling stock equipment - Capacitors for power electronics |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| IEC 61287-1:2014 | Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
| EN 61377:2016 | Railway applications - Rolling stock - Combined test method for traction Systems |
| EN 60146-1-1:2010 | Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements |
| IEC 60050-811:1991 | International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction |
| EN 61373:2010/AC:2017-09 | RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010) |
| IEC 61148:2011 | Terminal markings for valve device stacks and assemblies and for power conversion equipment |
| EN 50153 : 2014 AMD 1 2017 | RAILWAY APPLICATIONS - ROLLING STOCK - PROTECTIVE PROVISIONS RELATING TO ELECTRICAL HAZARDS |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| IEC 60050-551:1998 | International Electrotechnical Vocabulary (IEV) - Part 551: Power electronics |
| EN ISO 9003:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR FINAL INSPECTION AND TEST |
| EN 50125-1:2014 | Railway applications - Environmental conditions for equipment - Part 1: Rolling stock and on-board equipment |
| EN 50155:2017 | Railway applications - Rolling stock - Electronic equipment |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 60551:1992/A1:1997 | DETERMINATION OF TRANSFORMER AND REACTOR SOUND LEVELS |
| HD 91 : 200S1 | RULES FOR OHMIC RESISTORS USED IN THE POWER CIRCUITS OF ELECTRICALLY POWERED VEHICLES |
| EN 50163 : 2004 COR 2013 | RAILWAY APPLICATIONS - SUPPLY VOLTAGES OF TRACTION SYSTEMS |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
| EN 50126 : 1999 | RAILWAY APPLICATIONS - THE SPECIFICATION AND DEMONSTRATION OF RELIABILITY, AVAILABILITY, MAINTAINABILITY AND SAFETY (RAMS) |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
| IEC 60384-4:2016 | Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO<sub>2</sub>) and non-solid electrolyte |
| EN 50082-1:1997 | Electromagnetic compatibility - Generic immunity standard - Part 1: Residential, commercial and light industry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.