BS EN 4700-003:2010
Current
Current
The latest, up-to-date edition.
Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification Tube
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
31-10-2010
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Wording of order
5 Health and safety
6 Technical requirements
Specifies the requirements for the ordering, manufacture, testing, inspection and delivery of steel and heat resisting alloy tube.
| Committee |
ACE/61
|
| DevelopmentNote |
Supersedes 01/710901 DC. (11/2010)
|
| DocumentType |
Standard
|
| Pages |
32
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 4700-003:2010 | Identical |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN ISO 6508-1:2016 | Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| EN ISO 8493:2004 | Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 10079:2007 | Definition of steel products |
| EN 2950:2008 | Aerospace series - Test method - Wrought heat resisting alloys Semi-finished products and parts - Conditions for macrographic and micrographic examination - Atlas of structures and defects |
| TR 2410 : 2 | AEROSPACE SERIES - METALLIC MATERIALS - RELATIONSHIP BETWEEN DIMENSIONAL STANDARDS AND MATERIAL STANDARDS |
| EN 2032-2:1994 | Aerospace series - Metallic materials - Part 2: Coding of metallurgical condition in delivery condition |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| EN ISO 643:2012 | Steels - Micrographic determination of the apparent grain size (ISO 643:2012) |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| PREN 2002-17 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - TUBE USED UNDER PRESSURE - PART 17 - INTEGRITY TEST |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| ISO 8493:1998 | Metallic materials Tube Drift-expanding test |
| SAE AMS 2750 : 2012 | PYROMETRY |
| PREN 3718 : 200P1 | AEROSPACE SERIES - TEST METHOD FOR METALLIC MATERIALS - ULTRASONIC INSPECTION OF TUBES |
| ISO 3887:2003 | Steels Determination of depth of decarburization |
| ISO 3651-2:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
| EN 2032-1:2001 | Aerospace series - Metallic materials - Part 1: Conventional designation |
| PREN 2002-20 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 20: EDDY CURRENT TESTING OF CIRCULAR CROSS-SECTION TUBES |
| EN ISO 3651-1 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - PART 1: AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN NITRIC ACID MEDIUM BY MEASUREMENT OF LOSS IN MASS (HUEY TEST) |
| ISO 3651-1:1998 | Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) |
| EN ISO 3651-2 : 1998 | DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
| ISO 643:2012 | Steels Micrographic determination of the apparent grain size |
| PREN 4259 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - DEFINITION OF GENERAL TERMS |
| PREN 2002-18 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR METALLIC MATERIALS - PART 18 - HYDRAULIC DISTENSION TEST FOR TUBE |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| ISO 8492:2013 | Metallic materials Tube Flattening test |
| EN 2002-002:2005 | Aerospace series - Metallic materials - Test methods - Part 2: Tensile testing at elevated temperature |
| SAE AMS 2315 : 2013 | DETERMINATION OF DELTA FERRITE CONTENT |
| EN ISO 8492:2013 | Metallic materials - Tube - Flattening test (ISO 8492:2013) |
| EN 2002-005:2007 | Aerospace series - Test methods for metallic materials - Part 005: Uninterrupted creep and stress-rupture testing |
| EN 4258:1998 | Aerospace series - Metallic materials - General organization of standardization - Links between types of EN standards and their use |
| EN 2002-001:2005 | Aerospace series - Metallic materials - Test methods - Part 1: Tensile testing at ambient temperature |
| PREN 2951 : 200P1 | AEROSPACE SERIES - METALLIC MATERIALS - TEST METHOD - MICROGRAPHIC DETERMINATION OF CONTENT OF NON-METALLIC INCLUSIONS |
| EN 2078:2001 | Aerospace series - Metallic materials - Manufacturing schedule, inspection schedule, inspection and test report - Definition, general principles, preparation and approval |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.