BS EN 15434 : 2006
Current
The latest, up-to-date edition.
GLASS IN BUILDING - PRODUCT STANDARD FOR STRUCTURAL AND/OR ULTRA-VIOLET RESISTANT SEALANT (FOR USE WITH STRUCTURAL SEALANT GLAZING AND/OR INSULATING GLASS UNITS WITH EXPOSED SEALS)
Hardcopy , PDF
English
01-01-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Sealant
5 Requirements
6 Sealing and bonding
7 Compatibility with adjacent material
8 Evaluation of conformity
9 Marking and/or labelling
Annex A (normative) - Evaluation of mechanical tests
results
Annex B (normative) - Shear at 23 degrees C: Test method
Annex C (normative) - Factory production control
Annex D (normative) - Outer seal of insulating glass
category differentiation
Annex E (normative) - Formation of bubbles
Annex F (informative) - Sealing, structural bonding and
UV resistance: schematic illustrations
Annex G (normative) - Initial testing of bonding of sealant
to non-glass substrates
Annex V (informative) - Provisions for voluntary involvement
of third party(ies)
Bibliography
Specifies the role of sealants that are in conformity with this European Standard, with respect to sealing and bonding. It also covers the evaluation of conformity and the factory production control with respect to the production of sealants in conformity with this standard.
| Committee |
B/520/4
|
| DevelopmentNote |
Supersedes 03/100997 DC (06/2006) 2006 Edition Re-Issued in August 2010 & incorporates AMD 1 2010. (08/2010)
|
| DocumentType |
Standard
|
| Pages |
66
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 15434 : 2006 + A1 2010 | Identical |
| UNI EN 15434 : 2010 | Identical |
| EN 15434:2006+A1:2010 | Identical |
| NEN EN 15434 : 2006 + A1 2010 | Identical |
| UNE-EN 15434:2007 | Identical |
| I.S. EN 15434:2006 | Identical |
| NS EN 15434 : 2006 + A1 2010 | Identical |
| DIN EN 15434:2010-07 | Identical |
| NBN EN 15434 : 2006 + A1 2010 | Identical |
| SN EN 15434 : 2006 + A1 2010 | Identical |
| ISO 20492-4:2010 | Glass in buildings — Insulating glass — Part 4: Methods of test for the physical attributes of edge seals |
| EN 13022-1:2014 | Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing |
| EN ISO 7389:2003 | Building construction - Jointing products - Determination of elastic recovery of sealants (ISO 7389:2002) |
| ISO 7389:2002 | Building construction Jointing products Determination of elastic recovery of sealants |
| EN ISO 3231:1997 | Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
| EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
| EN 572-2:2012 | Glass in building - Basic soda lime silicate glass products - Part 2: Float glass |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| ISO 10563:2017 | Buildings and civil engineering works — Sealants — Determination of change in mass and volume |
| EN 1279-4:2002 | Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN ISO 11358:1997 | Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997) |
| ISO 1183-1:2012 | Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
| ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 572-1:2012+A1:2016 | Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN ISO 868:2003 | Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) |
| EN ISO 8339:2005 | Building construction - Sealants - Determination of tensile properties (Extension to break) (ISO 8339:2005) |
| EN ISO 10563:2017 | Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017) |
| ISO 8339:2005 | Building construction Sealants Determination of tensile properties (Extension to break) |
| ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN 13022-2:2014 | Glass in building - Structural sealant glazing - Part 2: Assembly rules |
| EN ISO 1183-1:2012 | Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
| ISO 868:2003 | Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
| ISO 3231:1993 | Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.