BS EN 15200:2007
Current
The latest, up-to-date edition.
Sanitary appliances. Multifunction shower cabinets
Hardcopy , PDF
English
31-01-2010
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and Definitions
4 Installation and maintenance
4.1 General
4.2 Protection of drinking water quality
4.3 Maintenance
5 Requirements
5.1 Electrical and safety
5.2 Dimensional deviations
5.3 Base
5.3.1 General
5.3.2 Water Drainage
5.3.3 Connecting dimensions
5.3.4 Resistance to temperature changes
5.3.5 Mechanical resistance
5.4 Walls
5.5 Common requirements applying to base, walls and roof
5.5.1 Chemical resistance
5.5.2 Water absorption
5.5.3 Steam resistance
5.5.4 Resistance to wet and dry cycling
5.5.5 Colour fastness
5.5.6 Resistance to scratching
5.6 Corrosion resistance
5.7 Construction and design
5.7.1 Appearance
5.7.2 Waste outlet drainage
5.7.3 Steam outlets
5.7.4 Pumps
5.7.5 Mirrors
5.7.6 Components
5.8 Whirlpool
5.9 Stability
5.10 Endurance of doors
5.11 Seats
5.12 Grab handles
5.13 Watertightness
5.13.1 Cabinet watertightness
5.13.2 Piping watertightness
5.14 Steam system
5.14.1 Temperature increase
5.14.2 Temperature distribution
6 Test methods
6.1 Water Drainage
6.2 Resistance to temperature changes
6.2.1 Test apparatus:
6.2.2 Procedure (the base is submitted successively
to test A and test B)
6.3 Deflections under load
6.3.1 General
6.3.2 Test apparatus
6.3.3 Preloading
6.3.4 Procedure
6.4 Resistance to impact
6.4.1 Test apparatus
6.4.2 Procedure
6.5 Mechanical resistance of base surface
6.5.1 Test apparatus
6.5.2 Test specimen
6.5.3 Procedure
6.6 Chemical resistance
6.6.1 Test apparatus and chemicals
6.6.2 Test specimen
6.6.3 Procedure
6.7 Water absorption
6.7.1 Principle
6.7.2 Test apparatus
6.7.3 Test specimen
6.7.4 Procedure
6.8 Steam resistance
6.9 Resistance to wet and dry cycling
6.9.1 Test apparatus
6.9.2 Test specimens
6.9.3 Procedure
6.10 Colour fastness to hot water
6.10.1 Apparatus
6.10.2 Test specimens
6.10.3 Procedure
6.11 Resistance to scratching
6.11.1 Principle
6.11.2 Test apparatus
6.11.3 Test specimen
6.11.4 Procedure
6.11.5 Expression of results
6.12 Waste outlet drainage
6.12.1 Test apparatus
6.12.2 Procedure
6.13 Stability
6.13.1 Test apparatus
6.13.2 Procedure
6.14 Seats
6.14.1 Test apparatus
6.14.2 Procedure
6.15 Grab handles
6.15.1 Test apparatus
6.15.2 Procedure
6.16 Unit watertightness test
6.16.1 Principle
6.16.2 Test apparatus
6.16.3 Procedure
6.17 Piping leaktightness
6.17.1 Test apparatus
6.17.2 Procedure
6.18 Steam heating system
6.18.1 Test apparatus
6.18.2 Procedure
7 Marking
8 Manufacturer's instructions
Describes requirements and test methods for multifunction shower cabinets (subsequently referred to as unit(s)), used for domestic purposes.
| Committee |
B/503
|
| DevelopmentNote |
Supersedes 05/30132908 DC. (06/2007) Reviewed and confirmed by BSI, February 2014. (01/2014)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 15200:2007 | Identical |
| NS EN 15200 : 2007 AC 2009 | Identical |
| NEN EN 15200 : 2007 C1 2009 | Identical |
| SN EN 15200 : 2007 | Identical |
| UNE-EN 15200:2008 | Identical |
| I.S. EN 15200:2007 | Identical |
| NBN EN 15200 : 2007 COR 2009 | Identical |
| UNI EN 15200 : 2007 | Identical |
| NF EN 15200 : 2008 | Identical |
| DIN EN 15200:2007-08 | Identical |
| EN 274-1:2002 | Waste fittings for sanitary appliances - Part 1: Requirements |
| EN 817:2008 | Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications |
| EN 251:2012 | Shower trays - Connecting dimensions |
| EN 1287:2017 | Sanitary tapware - Low pressure thermostatic mixing valves - General technical specification |
| EN 1112:2008 | Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification |
| EN 1113:2015 | Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification |
| EN 198:2008 | Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods |
| EN 1286:1999 | Sanitary tapware - Low pressure mechanical mixing valves - General technical specification |
| EN 14428:2015 | Shower enclosures - Functional requirements and test methods |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| EN 13904 : 2003 | LOW RESISTANCE SHOWER OUTLETS FOR SANITARY TAPWARE |
| EN 232:2012 | Baths - Connecting dimensions |
| ISO 4586-2:2015 | High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 2: Determination of properties |
| EN 12373-1 : 2001 | ALUMINIUM AND ALUMINIUM ALLOYS - ANODIZING - PART 1: METHOD FOR SPECIFYING DECORATIVE AND PROTECTIVE ANODIC OXIDATION COATINGS ON ALUMINIUM |
| EN 60730-2-8:2002/A1:2003 | AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-8: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED WIRE VALVES, INCLUDING MECHANICAL REQUIREMENTS |
| IEC 60730-2-8:2000+AMD1:2002+AMD2:2015 CSV | Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated watervalves, including mechanical requirements |
| EN 13905 : 2003 | LOW RESISTANCE SHOWER HOSES FOR SANITARY TAPWARE |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 200:2008 | Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| IEC 60335-2-105:2016 | Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets |
| ISO 7892:1988 | Vertical building elements — Impact resistance tests — Impact bodies and general test procedures |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| EN 1111:2017 | Sanitary tapware - Thermostatic mixing valves (PN 10) - General technical specification |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN 60335-2-105 : 2005 AMD 11 2010 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-105: PARTICULAR REQUIREMENTS FOR MULTIFUNCTIONAL SHOWER CABINETS |
| EN 12764:2015 | Sanitary appliances - Specification for whirlpool baths |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.