BS EN 1454:1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Portable, hand-held, internal combustion cutting-off machines. Safety
Hardcopy , PDF
30-06-2006
English
15-12-1997
0 Introduction
1 Scope
2 Normative references
3 Definitions - Terminology - Symbols and abbreviations
3.1 Work operations
3.2 Controls
3.3 Handle
3.4 Safety devices
3.5 Cutting equipment
3.6 Miscellaneous definitions
3.7 Technical criteria for the description of a
cutting-off machine
4 List of significant hazards
5 Safety requirements and/or measures
5.1 General requirements for cutting-off wheel guards,
spindles and wheel flanges
5.2 Noise
5.3 Method of measurement of noise
5.4 Vibration
5.5 Method of measurement of hand-transmitted vibration
5.6 Test procedures
5.7 General design, performance, safety and construction
requirements
6 Verification of safety requirements and/or measures
7 Instructions for use - Provisions for technical data,
operator's manual and recommended tools
7.1 General
7.2 Technical data
7.3 Operator's manual
8 Marking
8.1 General
8.2 Basic markings
9 Tools
Annexes
A (normative) Method of noise measurement
B (normative) Method of vibration measurement
C (normative) Verification of the safety requirements
D (informative) Recommended symbols
ZA (informative) Relationship of this European Standard
with EU Directives
Applicable to machines designed for cutting-off building materials and metals according to the type of cutting-off wheel selected.
| Committee |
B/513/-/6
|
| DevelopmentNote |
Supersedes 94/105143 DC. (09/2005)
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| SN EN 1454 : 1998 | Identical |
| UNI EN 1454 : 1999 | Identical |
| NEN EN 1454 : 1997 | Identical |
| UNE-EN 1454:1998 | Identical |
| DIN EN 1454:1997-09 | Identical |
| NS EN 1454 : 1ED 1997 | Identical |
| I.S. EN 1454:1998 | Identical |
| NBN EN 1454 : 1997 | Identical |
| EN 1454 : 1997 | Identical |
| NF EN 1454 : 1997 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 266:1997 | Acoustics — Preferred frequencies |
| ISO 7293:1997 | Forestry machinery Portable chain saws Engine performance and fuel consumption |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| 1973/23/EEC : 1973 | COUNCIL DIRECTIVE OF 19 FEBRUARY 1973 ON THE HARMONIZATION OF THE LAWS OF MEMBER STATES RELATING TO ELECTRICAL EQUIPMENT DESIGNED FOR USE WITHIN CERTAIN VOLTAGE LIMITS |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN 28662-1:1992 | Hand-held portable power tools - Measurement of vibrations at the handle - Part 1: General (ISO 8662-1:1988) |
| ENV 1070 : 1993 | SAFETY OF MACHINERY - TERMINOLOGY |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| EN 61260:1995/A1:2001 | ELECTROACOUSTICS - OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS |
| IEC 60651:1979+AMD1:1993+AMD2:2000 CSV | Sound level meters |
| ENV 25349 : 1992 | MECHANICAL VIBRATION - GUIDELINES FOR THE MEASUREMENT AND THE ASSESSMENT OF HUMAN EXPOSURE TO HAND TRANSMITTED VIBRATION (ISO 5349:1986) |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.