BS EN 14232:2009
Current
Current
The latest, up-to-date edition.
Advanced technical ceramics. Terms, definitions and abbreviations
Published date
30-11-2009
Publisher
Sorry this product is not available in your region.
| Committee |
RPI/13
|
| DevelopmentNote |
Supersedes DD ENV 14232 & 09/30185903 DC. (12/2009)
|
| DocumentType |
Standard
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN 14232:2009 | Identical |
| EN 1389:2003 | Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity |
| EN 12923-1:2006 | Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests |
| EN 1071-6:2007 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test |
| CEN/TS 1159-4:2004 | Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity |
| EN 1007-1:2002 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 1: Determination of size content |
| EN 1007-2:2002 | Advanced technical ceramics - Ceramics composites - Methods of test for reinforcement - Part 2: Determination of linear density |
| EN 843-2:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio |
| EN 12290:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties |
| EN 1071-10:2009 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
| CEN/TS 15658:2007 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method |
| EN 1007-3:2002 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area |
| EN 843-1:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength |
| EN 821-3:2005 | Advanced technical ceramics - Monolithic ceramics. Thermo-physical properties - Part 3: Determination of specific heat capacity |
| EN 15335:2007 | Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 °C |
| EN 820-1:2002 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermonechanical properties - Part 1: Determination of flexural strength at elevated temperatures |
| EN 12789:2002 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength |
| EN 725-2:2007 | Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate |
| EN 12788:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength |
| CEN/TS 15365:2006 | Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method |
| EN 623-4:2004 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness |
| EN 13234:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Evaluation of the resistance to crack propagation by notch sensitivity testing |
| EN 821-1:1995 | Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 1: Determination of thermal expansion |
| EN ISO 18756:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003) |
| ISO 18753:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pycnometer |
| EN 1007-6:2007 | Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature |
| EN 1159-1:2003 | Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion |
| EN 843-5:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis |
| EN 658-1:1998 | Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties |
| EN 1071-9:2009 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain |
| EN 1006:2009 | Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties |
| CEN/TS 1071-11:2005 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 11: Determination of internal stress by the Stoney formula |
| EN 820-4:2009 | Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures |
| EN 15156:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude |
| EN 843-3:2005 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests |
| EN 843-6:2009 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation |
| EN 623-1:2006 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 1: Determination of the presence of defects by dye penetration |
| EN 820-2:2003 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation |
| EN 12289:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties |
| CEN/TS 1071-8:2004 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 8: Rockwell indentation test for evaluation of adhesion |
| EN 725-11:2006 | Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination of densification on natural sintering |
| EN 1892:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties |
| EN 725-1:2007 | Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina |
| EN 725-8:2006 | Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density |
| EN ISO 15732:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003) |
| EN 725-9:2006 | Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density |
| EN 1071-1:2003 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 1: Determination of coating thickness by contact probe filometer |
| EN 820-5:2009 | Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures |
| EN 623-2:1993 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 2: Determination of density and porosity |
| EN 658-2:2002 | Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 2: Determination of compression properties |
| EN 821-2:1997 | Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method |
| EN 1071-4:2006 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) |
| CEN/TS 1007-7:2006 | Advanced technical ceramics - Ceramic composites. Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
| EN 1893:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties |
| EN 658-5:2002 | Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) |
| CEN/TS 14425-1:2003 | Advanced technical ceramics - Test methods for determination of fracture toughness of monolithic ceramics - Part 1:Guide to test method selection |
| ISO 18756:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method |
| CEN/TS 14425-5 : 2004 | ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITIC CERAMICS - PART 5: SINGLE-EDGE VEE-NOTCH BEAM (SEVNB) METHOD |
| EN 623-5:2009 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 5: Determination of phase volume fraction by evaluation of micrographs |
| EN 843-4:2005 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
| EN 623-3:2001 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method) |
| EN ISO 18757:2005 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003) |
| ENV 14226:2002 | Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES) |
| EN 1159-2:2003 | Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity |
| EN 15157:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude |
| ISO 18757:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of specific surface area of ceramic powders by gas adsorption using the BET method |
| ENV 14312:2002 | Advanced technical ceramics - Ceramic powders - Determination of flowability behaviour of ceramic granules |
| EN 15158:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude |
| IEC 60672-2:1999 | Ceramic and glass insulating materials - Part 2: Methods of test |
| EN 14186:2007 | Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique |
| EN 725-10:2007 | Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties |
| EN 820-3:2004 | Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching |
| EN 725-12:2001 | Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia |
| EN 1007-4:2004 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 4: Determination of tensile properties of filaments at ambient temperature |
| EN 1007-5:2010 | Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature |
| EN 1071-2:2002 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 2: Determination of coating thickness by the crater grinding method |
| EN 1071-3:2005 | Advanced technical ceramics - Methods of test for ceramic coatings - Part 3: Determination of adhesion and other mechanical failure modes by a scratch test |
| EN ISO 18753:2017 | Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017) |
| EN 1894:2005 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens |
| EN 725-3:2007 | Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas |
| EN 12291:2003 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties |
| ENV 12923-2:2001 | Advanced technical ceramics - Monolithic ceramics - Part 2: Oxidation test |
| EN 658-4:2003 | Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens |
| CEN/TR 13233 : 2007 COR 2007 | ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
| ISO 15732:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
| EN 725-4:2006 | Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis |
| ENV 14273:2002 | Advanced technical ceramics - Ceramic powders - Determination of crystalline phases in zirconia |
| EN 658-3:2002 | Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength |
| EN 13235:2006 | Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour |
| CEN/TS 14425-3 : 2003 | ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.