BS EN 14175-6:2006
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Fume cupboards Variable air volume fume cupboards
Hardcopy , PDF
13-08-2024
English
13-08-2024
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 General
4.2 System status port
4.3 Air flow indicator
5 Type test methods
5.1 General
5.2 Test conditions
5.2.1 VAV fume cupboards
5.2.2 VAV systems
5.3 Test of VAV systems
5.3.1 General
5.3.2 Tests for air flow rate characteristics
5.3.3 Tests for dynamic control behaviour
5.3.4 Test of set points
5.4 Test of VAV fume cupboards
5.4.1 Test installation
5.4.2 Test of the integrated VAV system
5.4.3 Test of the VAV fume cupboard
6 On-site test methods
6.1 General
6.2 Extract volume flow rate at set points
6.3 Test of set points
6.4 Test of response time
6.5 Containment
6.6 Air exchange at minimum volume flow rate
7 Product manual
8 Marking and labelling
9 Test reports
9.1 Type test report for VAV systems
9.2 Type test report for VAV fume cupboards
9.3 On-site test report for VAV fume cupboards
Bibliography
National annex NA (informative) Recommendations for
the exchange of information and
recommendations for installation
Describes requirements and type test methods for VAV systems. It also specifies additional requirements to those in EN 14175-2 and additional test methods to those in EN 14175-3 and EN 14175-4 for fume cupboards with VAV systems (VAV fume cupboards).
| Committee |
LBI/1/1
|
| DevelopmentNote |
Supersedes 04/30115060 DC. (05/2007) Together with BS EN 14175-1, BS EN 14175-2, BS EN 14175-3, BS EN 14175-4, DD CEN/TS 14175-5 and BS EN 14175-7, it supersedes BS 7258-1(1994), BS 7258-2(1994), BS 7258-3(1994) and BS 7258-4(1994). (02/2014)
|
| DocumentType |
Standard
|
| Pages |
40
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| Supersedes |
This document specifies requirements and type test methods for VAV systems. It also specifies additional requirements to those in EN 14175-2 and additional test methods to those in EN 14175-3 and EN 14175-4 for fume cupboards with VAV systems (VAV fume cupboards).
For terms and definitions, EN 14175-1 applies. For safety and performance requirements of fume cupboards, EN 14175-2 applies. For type testing of fume cupboards with preset air volume flow, EN 14175-3 applies. For on-site test methods of fume cupboards already installed in a laboratory, EN 14175-4 applies.
| Standards | Relationship |
| I.S. EN 14175-6:2006 | Identical |
| EN 14175-6:2006 | Identical |
| NEN EN 14175-6 : 2006 | Identical |
| NBN EN 14175-6 : 2006 | Identical |
| NF EN 14175-6 : 2006 | Identical |
| UNI EN 14175-6 : 2006 | Identical |
| NS EN 14175-6 : 1ED 2006 | Identical |
| UNE-EN 14175-6:2007 | Identical |
| SN EN 14175-6 : 2006 | Identical |
| DIN EN 14175-6:2006-08 | Identical |
| BS 2782-1:Method 140E:1982 | Methods of testing plastics. Thermal properties Flammability of a small, inclined test piece exposed to an alcohol flame (laboratory method) |
| BS 5588-9:1989 | Fire precautions in the design, construction and use of buildings Code of practice for ventilation and air conditioning ductwork |
| EN 14175-4:2004 | Fume cupboards - Part 4: On-site test methods |
| EN 14175-1:2003 | Fume cupboards - Part 1: Vocabulary |
| BS 4142:1997 | Method for rating industrial noise affecting mixed residential and industrial areas |
| BS EN 60079-14:2014 | Explosive atmospheres Electrical installations design, selection and erection |
| EN ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) |
| EN 842:1996+A1:2008 | Safety of machinery - Visual danger signals - General requirements, design and testing |
| ISO 5167-1:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 1: General principles and requirements |
| EN 14175-3:2003 | Fume cupboards - Part 3: Type test methods |
| EN 12589:2001 | Ventilation for buildings - Air terminal units - Aerodynamic testing and rating of constant and variable rate terminal units |
| EN 14175-2:2003 | Fume cupboards - Part 2: Safety and performance requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.