• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

BS EN 1387:1997

Current

Current

The latest, up-to-date edition.

Machine readable cards. Health care applications. Cards. General characteristics

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

15-04-1997

£120.00
Excluding VAT

Foreword
Introduction
1 Scope
2 Normative references
3 Definitions
4 Abbreviations
5 Physical characteristics
6 Recording techniques
    6.1 Embossing, engraving, printing
          6.1.1 Technical specification
          6.1.2 Organization and location of the
                  visually readable data
                  6.1.2.1 L1 and L2
                  6.1.2.2 L3,L4 and L5
    6.2 Integrated circuits
          6.2.1 Technical specification
          6,2,2 IC contact area
    6.3 Photograph
          6.3.1 Technical specification
          6,3,2 Photograph area
    6.4 Bar codes
          6.4.1 Technical specification
          6.4.2 Bar codes area
    6.5 Magnetic stripe
          6.5.1 Technical specification
          6.5.2 Magnetic stripe area
    6.6 Signature panel
    6.7 High density storage techniques
Annex A (informative) Possible locations of technologies
on health care cards
Annex B (normative) Luhn formula for computing modulus
10 'double-add-double' check digit

Defines the requirements for cards for health care, health care coverage or entitlement, including physical characteristics and recording techniques, but does not include security requirements. Describes the area on each side of the card which is allocated to each type of media.

Committee
IST/17
DevelopmentNote
Supersedes 94/643779 DC. (09/2005)
DocumentType
Standard
Pages
14
PublisherName
British Standards Institution
Status
Current
Supersedes

This European Standard specifies directly or by reference the requirements for cards used for health care, health care coverage or health care entitlement.

This European Standard specifies the physical characteristics of cards and the recording techniques, but not the security requirements. It defines the area on each side of the surface of the card allocated to each type of media.

Test methods applying to this European Standard are as defined in ISO/IEC10373.

Standards Relationship
NS EN 1387 : 1ED 1997 Identical
I.S. EN 1387:1997 Identical
UNI EN 1387 : 1997 Identical
NBN EN 1387 : 1996 Identical
NEN EN 1387 : 1996 Identical
NF EN 1387 : 1996 Identical
UNE-EN 1387:1997 Identical
SNV BS EN 1387 : 1997 Identical
EN 1387:1996 Identical

ISO/IEC 11694-1:2012 Identification cards Optical memory cards Linear recording method Part 1: Physical characteristics
ISO/IEC 8859-1:1998 Information technology 8-bit single-byte coded graphic character sets Part 1: Latin alphabet No. 1
ISO/IEC 11694-3:2001 Identification cards Optical memory cards Linear recording method Part 3: Optical properties and characteristics
ISO/IEC 10373:1993 Identification cards Test methods
EN 27811-2 : 1989 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 2: MAGNETIC STRIPE
EN 27810 : 1989 IDENTIFICATION CARDS - PHYSICAL CHARACTERISTICS
EN 27811-4 : 1989 IDENTIFICATION CARDS - RECORDING TECHNIQUE - LOCATION OF READ-ONLY MAGNETIC TRACKS - TRACKS 1 AND 2
EN 27816-2 : 1989 IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) WITH CONTACTS - PART 2: DIMENSIONS AND LOCATION OF THE CONTACTS
ISO/IEC 11693:2005 Identification cards Optical memory cards General characteristics
EN 27811-5 : 1989 IDENTIFICATION CARDS - RECORDING TECHNIQUE - LOCATION OF READ-WRITE MAGNETIC TRACK - TRACK 3
EN 27816-3:1992/A2:1995 IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) CARDS WITH CONTACTS - PART 3: ELECTRONIC SIGNALS AND TRANSMISSION PROTOCOLS
EN 23166:1993/AC:1994 CODES FOR THE REPRESENTATION OF NAMES OF COUNTRIES
EN 27816-1 : 1989 IDENTIFICATION CARDS - INTEGRATED CIRCUIT(S) WITH CONTACTS - PART 1: PHYSICAL CHARACTERISTICS
EN 27811-3 : 1989 IDENTIFICATION CARDS - RECORDING TECHNIQUE - LOCATION OF EMBOSSED CHARACTERS ON ID-1 CARDS
EN 27811-1 : 1989 IDENTIFICATION CARDS - RECORDING TECHNIQUE - PART 1: EMBOSSING
ISO/IEC 11694-2:2012 Identification cards Optical memory cards Linear recording method Part 2: Dimensions and location of the accessible optical area

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.