BS EN 13707:2013
Current
The latest, up-to-date edition.
Flexible sheets for waterproofing. Reinforced bitumen sheets for roof waterproofing. Definitions and characteristics
Hardcopy , PDF
English
31-10-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 System-related characteristics
5 Product characteristics
6 Evaluation of conformity
7 Product data sheet
8 Marking, labelling and packaging
Annex A (normative) - Applicability of characteristics
Annex B (normative) - Frequencies of testing for
factory production control
Annex C (informative) - Information about chemical
resistance
Annex D (informative) - Example of a product data
sheet - General information
Annex E (informative) - Wind-uplift properties of
mechanically fixed bituminous membranes -
General information
Annex ZA (informative) - Clauses of this European
Standard addressing essential requirements
or other provisions of EU Directives
Bibliography
Defines definitions and characteristics for flexible reinforced bitumen sheets for which the intended use is roofing.
| Committee |
B/546
|
| DevelopmentNote |
Supersedes BS 747(2000) and 99/102775 DC. (05/2005) Supersedes 08/30178019 DC. (10/2009) Supersedes 12/30258217 DC. (10/2013)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies definitions and characteristics for flexible reinforced bitumen sheets for which the intended use is roofing. This covers sheets used as top layers, intermediate layers and underlayers. It does not cover reinforced bitumen sheets for waterproofing used as underlays for discontinuous roofing.
This European Standard does not cover waterproofing sheets which are intended to be used fully bonded under bituminous products (e.g. asphalt) directly applied at high temperature, specified by EN 14695.
| Standards | Relationship |
| UNI EN 13707 : 2013 | Identical |
| NEN EN 13707 : 2013 | Identical |
| NS EN 13707 : 2013 | Identical |
| SN EN 13707 : 2013 | Identical |
| DIN EN 13707:2013-12 | Identical |
| UNE-EN 13707:2014 | Identical |
| EN 13707:2013 | Identical |
| I.S. EN 13707:2013 | Identical |
| NF EN 13707 : 2014 | Identical |
| NBN EN 13707 : 2013 | Identical |
| PD 476-3:2012 | Classification rules for the end-use application of test results arising from BS 476-3, \'Classification and method of test for external fire exposure of roofs\' |
| BS 5385-5:2009 | Wall and floor tiling Design and installation of terrazzo, natural stone and agglomerated stone tile and slab flooring. Code of practice |
| 11/30256741 DC : DRAFT DEC 2011 | PD 476-3 - CLASSIFICATION RULES FOR THE END-USE APPLICATION OF TEST RESULTS ARISING FROM BS 476-3:2004 "CLASSIFICATION AND METHOD OF TEST FOR EXTERNAL FIRE EXPOSURE OF ROOFS" |
| 06/30058801 DC : DRAFT AUG 2006 | BS 8747 - REINFORCED BITUMEN MEMBRANES (RBMS) FOR ROOFING - GUIDE TO SELECTION AND SPECIFICATION |
| 12/30256741 DC : 0 | BS PD 476-33 - CLASSIFICATION RULES FOR THE END-USE APPLICATION OF TEST RESULTS ARISING FROM BS 476-3:2004 - CLASSIFICATION AND METHOD OF TEST FOR EXTERNAL FIRE EXPOSURE OF ROOFS |
| BS 8747:2007 | Reinforced bitumen membranes (RBMs) for roofing. Guide to selection and specification |
| EN 1848-1:1999 | Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing |
| EN 1850-1:1999 | Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing |
| EN 13948:2007 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| EN 1107-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability |
| EN 1928:2000 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness |
| EN 12311-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of tensile properties |
| EN 12310-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for waterproofing - Determination of resistance to tearing (nail shank) |
| EN 1109:2013 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flexibility at low temperature |
| EN 1297:2004 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 13897:2004 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness after stretching at low temperature |
| EN 12316-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of peel resistance of joints |
| EN 1296:2000 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roofing - Method of artificial ageing by long term exposure to elevated temperature |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12730:2015 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to static loading |
| EN 1108:1999 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of form stability under cyclical temperature changes |
| EN 1849-1:1999 | Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing |
| EN 1110:2010 | Flexible sheets for waterproofing - Bitumen sheets for roof waterproofing - Determination of flow resistance at elevated temperature |
| EN 13416:2001 | Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Rules for sampling |
| EN 14695:2010 | Flexible sheets for waterproofing - Reinforced bitumen sheets for waterproofing of concrete bridge decks and other trafficked areas of concrete - Definitions and characteristics |
| EN 16002:2010 | Flexible sheets for waterproofing - Determination of the resistance to wind load of mechanically fastened flexible sheets for roof waterproofing |
| EN 12317-1:1999 | Flexible sheets for waterproofing - Part 1: Bitumen sheets for roof waterproofing - Determination of shear resistance of joints |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.