BS EN 13648-2:2002
Current
The latest, up-to-date edition.
Cryogenic vessels. Safety devices for protection against excessive pressure Bursting disc safety devices for cryogenic service
Hardcopy , PDF
English
03-07-2002
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Production testing
6 Cleanliness
7 Marking
8 Prevention of substitution
Annex ZA (informative) - Clauses of this European Standard
addressing essential requirements or other
provisions of EU Directives
Describes the requirements for the design, manufacture and testing of bursting disc safety devices for cryogenic service, i.e. for operation with cryogenic fluids below -10 degree C in addition to operation at ambient temperature.
| Committee |
PVE/18
|
| DevelopmentNote |
Supersedes 99/709738 DC (07/2002) Reviewed and confirmed by BSI, August 2012. (07/2012)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies the requirements for the design, manufacture and testing of bursting disc safety devices for cryogenic service, i.e. for operation with cryogenic fluids below - 10 °C in addition to operation at ambient temperature. It is a requirement of this standard that the bursting disc safety device(s) comply with prEN ISO 4126-2. In the event of different requirements, this standard takes precedence over that standard. This standard is restricted to bursting disc safety devices not exceeding a size of DN 100 designed to relieve single phase vapours or gases. A bursting disc assembly can be specified, constructed and tested such that it is suitable for use with more than one gas or with mixtures of gases. NOTE This standard does not provide methods for determining the capacity of bursting disc safety devices for a particular cryogenic vessel. Such methods are provided in prEN 13648-3.
| Standards | Relationship |
| NS EN 13648-2 : 1ED 2002 | Identical |
| UNI EN 13648-2 : 2004 | Identical |
| DIN EN 13648-2:2002-09 | Identical |
| I.S. EN 13648-2:2002 | Identical |
| NF EN 13648-2 : 2002 | Identical |
| EN 13648-2:2002 | Identical |
| NBN EN 13648-2 : 2002 | Identical |
| NEN EN 13648-2 : 2002 | Identical |
| UNE-EN 13648-2:2002 | Identical |
| SN EN 13648-2 : 2002 | Identical |
| EN 1252-2:2001 | Cryogenic vessels - Materials - Part 2: Toughness requirements for temperatures between -80 °C and -20 °C |
| EN 13458-1:2002 | Cryogenic vessels - Static vacuum insulated vessels - Part 1: Fundamental requirements |
| EN 1797-1 : 1998 | CRYOGENIC VESSELS - GAS/MATERIAL COMPATIBILITY - OXYGEN COMPATIBILITY |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| EN ISO 6708:1995 | Pipework components - Definition and selection of DN (nominal size) (ISO 6708:1995) |
| EN 12300 : 1998 AMD 1 2006 | CRYOGENIC VESSELS - CLEANLINESS FOR CRYOGENIC SERVICE |
| ISO 4126-2:2003 | Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices |
| EN 13530-1:2002 | Cryogenic vessels - Large transportable vacuum insulated vessels - Part 1: Fundamental requirements |
| EN 13648-3:2002 | Cryogenic vessels - Safety devices for protection against excessive pressure - Part 3: Determination of required discharge - Capacity and sizing |
| EN 1251-1:2000 | Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 1: Fundamental requirements |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.