BS EN 13604:2013
Current
The latest, up-to-date edition.
Copper and copper alloys. Semiconductor devices, electronic and vacuum products made from high conductivity copper
Hardcopy , PDF
English
30-06-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designations
5 Ordering information
6 Requirements
7 Sampling
8 Test methods
9 Declaration of conformity and inspection
documentation
10 Marking, packaging, labelling
Annex A (normative) - Reference chart for microscopic
examination at magnification 100x
Annex B (informative) - Characteristics of coppers for
electrical purposes
Bibliography
Describes the composition, property requirements including electrical properties and tolerances on dimensions and form of semiconductor devices, electronic and vacuum products in two copper grates Cu-OFE (CW009A) and Cu-PHCE (CW022A), in the form of wrought products, e.g. plate, sheet, strip, seamless tube, rod, bar, wire, profiles.
| Committee |
NFE/34
|
| DevelopmentNote |
Supersedes 99/710684 DC. (10/2002) Supersedes 11/30240465 DC. (07/2013)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard specifies the composition, property requirements including electrical properties and tolerances on dimensions and form of semiconductor devices, electronic and vacuum products in two copper grates Cu-OFE (CW009A) and Cu-PHCE (CW022A), in the form of wrought products, e.g. plate, sheet, strip, seamless tube, rod, bar, wire, profiles.
The sampling procedures, the methods of test for verification of conformity to the requirements of this European Standard, and the delivery conditions are also specified.
This European Standard applies to the wrought copper products as delivered to the device manufacturer, i.e. for further fabrication.
| Standards | Relationship |
| UNE-EN 13604:2003 | Identical |
| NS EN 13604 : 2013 | Identical |
| DIN EN 13604:2013-09 | Identical |
| NF EN 13604 : 2013 | Identical |
| NBN EN 13604 : 2013 | Identical |
| EN 13604:2013 | Identical |
| NEN EN 13604 : 2013 | Identical |
| UNI EN 13604 : 2013 | Identical |
| I.S. EN 13604:2013 | Identical |
| SN EN 13604 : 2013 | Identical |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| EN 1655:1997 | Copper and copper alloys - Declarations of conformity |
| EN 13605:2013 | Copper and copper alloys - Copper profiles and profiled wire for electrical purposes |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ISO 197-1:1983 | Copper and copper alloys — Terms and definitions — Part 1: Materials |
| EN 1412:2016 | Copper and copper alloys - European numbering system |
| ISO 1190-1:1982 | Copper and copper alloys — Code of designation — Part 1: Designation of materials |
| EN ISO 6892-1:2016 | Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
| ISO 2624:1990 | Copper and copper alloys — Estimation of average grain size |
| EN 13602:2013 | Copper and copper alloys - Drawn, round copper wire for the manufacture of electrical conductors |
| ISO 1811-2:1988 | Copper and copper alloys — Selection and preparation of samples for chemical analysis — Part 2: Sampling of wrought products and castings |
| ISO 6892-1:2016 | Metallic materials Tensile testing Part 1: Method of test at room temperature |
| IEC 60468:1974 | Method of measurement of resistivity of metallic materials |
| EN 13601:2013 | Copper and copper alloys - Copper rod, bar and wire for general electrical purposes |
| EN ISO 2626:1995 | Copper - Hydrogen embrittlement test (ISO 2626:1973) |
| EN 1976:2012 | Copper and copper alloys - Cast unwrought copper products |
| EN 1173:2008 | Copper and copper alloys - Material condition designation |
| ISO 7438:2016 | Metallic materials Bend test |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 13600:2013 | Copper and copper alloys - Seamless copper tubes for electrical purposes |
| EN ISO 2624:1995 | Copper and copper alloys - Estimation of average grain size (ISO 2624:1990) |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 4746:1977 | Oxygen-free copper Scale adhesion test |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 2626:1973 | Copper — Hydrogen embrittlement test |
| EN 50149:2012 | Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires |
| ISO 7801:1984 | Metallic materials — Wire — Reverse bend test |
| EN 13599:2014 | Copper and copper alloys - Copper plate, sheet and strip for electrical purposes |
| EN ISO 7438:2016 | Metallic materials - Bend test (ISO 7438:2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.