BS EN 13021 : 2003
Current
The latest, up-to-date edition.
WINTER SERVICE MACHINES - SAFETY REQUIREMENTS
Hardcopy , PDF
English
01-01-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
5.1 Design as regards handling and compatibility
with the carrier vehicle
5.1.1 Attachment fittings
5.1.2 Locking devices
5.1.3 Elevating equipment
5.1.4 Slewing devices
5.1.5 Support equipment for machines and
components
5.1.6 Disconnectable power and signal-transmitting
systems
5.1.7 Lashing points for demountable machines
5.1.8 Combination of carrier vehicle and machine
for winter service
5.1.9 Provisions for transportation
5.1.10 Guard design
5.2 Controls
5.2.1 General
5.2.2 Controls for spreaders
5.2.3 Controls for snow clearing machines
with rotary equipment
5.3 Access, walkways
5.4 Hot surfaces
5.5 Requirements for fluid power systems
5.5.1 Hydraulic systems
5.5.2 Pneumatic systems
5.6 Additional requirements on spreaders
5.6.1 Worm conveyors, chain conveyors,
agitator and crushing equipment
5.6.2 Belt conveyors
5.6.3 Spreader distributors
5.6.4 Covers
5.7 Additional requirements for snow clearing machines
with rotary equipment
5.7.1 Rotary equipment
5.7.2 Ejectors
5.7.3 Aprons
5.7.4 Aids for clearing snow blockage
5.7.5 Warning signs
5.8 Additional requirements for snow ploughs
5.8.1 Means on snow ploughs for reducing
impact caused by driving into solid
obstacles
5.8.2 Snow mist protection, snow screen
5.9 Marking of vehicles with attached or mounted
machines for winter service
5.10 Noise reduction by design
5.10.1 Noise reduction at source
5.10.2 Noise reduction by protective measures
5.10.3 Noise reduction by information
5.11 Reduction of vibration
6 Verification
7 Information for use
7.1 Operating and maintenance instructions
7.2 Spare parts list
8 Marking
Annex A (informative) - Terminology
Annex B (informative) - Truck attachment plate
Annex C (normative) - Safety guards on winter service
machines
Annex D (normative) - Warning sign "Warning of danger
ahead"
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 98/37/EC
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Describes the appropriate technical measures to eliminate or reduce risks arising from the significant hazards associated only with machine operation, setting and adjustments, load discharge and routine maintenance.
| Committee |
B/513/5
|
| DevelopmentNote |
Supersedes 97/108364 DC. (06/2003) 2003 Edition Re-Issued in May 2009 & incorporates AMD 1 2008. Supersedes 08/30177210 DC. (05/2009)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 13021:2004 | Identical |
| NF EN 13021 : 2003 + A1 2009 | Identical |
| I.S. EN 13021:2003 | Identical |
| NBN EN 13021 : 2003 + A1 2009 | Identical |
| SN EN 13021 : 2003 + A1 2009 | Identical |
| EN 13021:2003+A1:2008 | Identical |
| DIN EN 13021:2009-04 | Identical |
| NS EN 13021 : 2003 + A1 2008 | Identical |
| UNI EN 13021 : 2009 | Identical |
| NEN EN 13021 : 2003 + A1 2009 | Identical |
| ONORM EN 13021 : APR 2009 | Identical |
| EN 294:1992/AC:1993 | SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
| ISO 11200:2014 | Acoustics Noise emitted by machinery and equipment Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions |
| EN ISO 15667:2000 | Acoustics - Guidelines for noise control by enclosures and cabins (ISO 15667:2000) |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| EN 620:2002+A1:2010 | Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 8759-1:1998 | Agricultural wheeled tractors Front-mounted equipment Part 1: Power take-off and three- point linkage |
| ISO 15667:2000 | Acoustics Guidelines for noise control by enclosures and cabins |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| ISO 11001-2:1993 | Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 2: A-frame coupler |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| ISO 3740:2000 | Acoustics Determination of sound power levels of noise sources Guidelines for the use of basic standards |
| EN ISO 11688-2:2000 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998) |
| EN ISO 11200:2014 | Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions (ISO 11200:2014) |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| ISO 11001-4:1994 | Agricultural wheeled tractors and implements — Three-point hitch couplers — Part 4: Bar coupler |
| EN 953:1997+A1:2009 | Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
| EN ISO 3740:2000 | Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards (ISO 3740:2000) |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| ISO 11001-3:2009 | Agricultural wheeled tractors and implements Three-point hitch couplers Part 3: Link coupler |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN 13524:2003+A2:2014 | Highway maintenance machines - Safety requirements |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN ISO 2867:2011 | Earth-moving machinery - Access systems (ISO 2867:2011) |
| 1998/37/EC : 1998 | DIRECTIVE 98/37/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 22 JUNE 1998 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES RELATING TO MACHINERY |
| ISO 11001-1:2016 | Agricultural wheeled tractors — Three-point hitch couplers — Part 1: U-frame coupler |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO 2867:2011 | Earth-moving machinery Access systems |
| ISO/TR 11688-2:1998 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
| ISO 6750:2005 | Earth-moving machinery Operator's manual Content and format |
| ISO 8759-2:1998 | Agricultural wheeled tractors — Front-mounted equipment — Part 2: Stationary equipment connection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.