BS EN 12680-1:2003
Current
The latest, up-to-date edition.
Founding. Ultrasonic examination Steel castings for general purposes
Hardcopy , PDF
English
05-02-2003
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Order information
4.2 Extent of examination
4.3 Maximum permissible size of discontinuities
4.4 Personnel qualification
4.5 Wall section zones
4.6 Severity levels
5 Examination
5.1 Principles
5.2 Material
5.3 Equipment and coupling medium
5.4 Preparation of casting surfaces for examination
5.5 Examination procedure
5.6 Examination report
Annex A (informative) Sound-beam diameters
Annex B (informative) Types of indications
Bibliography
Gives the requirements for the ultrasonic examination of steel castings (with ferritic structure) for general purposes and the methods for determining internal discontinuities by the pulse-echo technique.
| Committee |
ISE/111
|
| DevelopmentNote |
Supersedes BS 6208(1990) and 00/716474 DC (02/2003)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This part of this standard specifies the requirements for the ultrasonic testing of steel castings (with limited content of austenite) and the methods for determining internal discontinuities by the pulse echo technique. This part of this standard applies to the ultrasonic testing of steel castings which have usually received a grain refining heat treatment, and with wall thicknesses up to and including 600 mm.
| Standards | Relationship |
| EN 12680-1:2003 | Identical |
| NS EN 12680-1 : 1ED 2003 | Identical |
| NEN EN 12680-1 : 2003 | Identical |
| NBN EN 12680-1 : 2003 | Identical |
| I.S. EN 12680-1:2003 | Identical |
| SN EN 12680-1 : 2003 | Identical |
| NF EN 12680-1 : 2003 | Identical |
| UNI EN 12680-1 : 2005 | Identical |
| UNE-EN 12680-1:2003 | Identical |
| DIN EN 12680-1:2003-06 | Identical |
| DEFSTAN 02-747(PT2)/3(2012) : 2012 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 2: NICKEL ALUMINIUM BRONZE NAVAL ALLOY INGOTS AND SAND CASTING WITH WELDING PERMITTED TO THE WETTED SURFACE |
| DEFSTAN 02-747(PT4)/4(2015) : 2015 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 4: NICKEL ALUMINIUM BRONZE NAVAL ALLOY SAND CASTINGS WITH WELDING RESTRICTED TO THE NON-WETTED SURFACE (CLASS 1 AND 2 CASTINGS ONLY) |
| DEFSTAN 02-747(PT4)/3(2012) : 2012 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 4: NICKEL ALUMINIUM BRONZE NAVAL ALLOY SAND CASTINGS WITH WELDING PERMITTED TO THE NON-WETTED SURFACE (CLASS 1 AND 2 CASTINGS ONLY) |
| DEFSTAN 02-747(PT4)/5(2015) : 2015 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 4: NICKEL ALUMINIUM BRONZE NAVAL ALLOY SAND CASTINGS WITH WELDING RESTRICTED TO THE NON-WETTED SURFACE (CLASS 1 AND 2 CASTINGS ONLY) |
| DEFSTAN 02-747(PT1)/3(2012) : 2012 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 1: NICKEL ALUMINIUM BRONZE NAVAL ALLOY CENTRIFUGALLY CAST |
| DEFSTAN 02-747(PT1)/2(2007) : 2007 | REQUIREMENTS FOR NICKEL ALUMINIUM BRONZE CASTINGS AND INGOTS - PART 1: NICKEL ALUMINIUM BRONZE NAVAL ALLOY CENTRIFUGALLY CAST |
| DEFSTAN 95-26/3(2006) : 2006 | SPECIALISED ARMOUR QUALITY CASTINGS |
| DEFSTAN 95-26/4(2011) : 2011 | SPECIALISED ARMOUR QUALITY CASTINGS |
| DEFSTAN 02-745/3(2017) : 2017 | CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR STEEL CASTINGS |
| DEFSTAN 02-745/1(2006) : 2006 | CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR STEEL CASTINGS |
| DEFSTAN 02-745/2(2012) : 2012 | CLASSIFICATION, INSPECTION REQUIREMENTS AND ACCEPTANCE STANDARDS FOR STEEL CASTINGS |
| EN 12668-2:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes |
| EN 27963 : 1992 | SPECIFICATION FOR CALIBRATION BLOCK NO. 2 FOR ULTRASONIC EXAMINATION OF WELDS |
| EN 1330-4:2010 | Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing |
| EN 12668-1:2010 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments |
| EN 473:2008 | Non-destructive testing - Qualification and certification of NDT personnel - General principles |
| EN 583-2:2001 | Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting |
| EN 1370:2011 | Founding - Examination of surface condition |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| EN 12223:1999 | Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1 |
| EN 12668-3:2013 | Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment |
| ISO 7963:2006 | Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.