BS EN 12591:2009
Current
Current
The latest, up-to-date edition.
Bitumen and bituminous binders. Specifications for paving grade bitumens
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
30-06-2011
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
B/510/19
|
| DevelopmentNote |
Supersedes 96/109392 DC. (08/2005) Together with BS EN 13924, it supersedes BS 3690-1(1989). (06/2011)
|
| DocumentType |
Standard
|
| Pages |
36
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Supersedes |
This European Standard provides a framework for specifying a range of properties and relevant test methods for bitumens, which are suitable for use in the construction and maintenance of roads, airfields and other paved areas, together with requirements for evaluation of conformity.
This European Standard does not directly address ‘cohesion, adhesion and setting ability’ (see Introduction).
NOTE Although industrial bitumens are specified according to EN 13305, it should be underlined that paving grade bitumens, specified according to this European Standard, can also be used for industrial applications.
| Standards | Relationship |
| EN 12591:2009 | Identical |
| SN EN 12591 : 2009 | Identical |
| NS EN 12591 : 2009 + NA 2011 | Identical |
| NBN EN 12591 : 2009 | Identical |
| I.S. EN 12591:2009 | Identical |
| NF EN 12591 : 2009 | Identical |
| NEN EN 12591 : 2009 | Identical |
| UNI EN 12591 : 2009 | Identical |
| UNE-EN 12591:2009 | Identical |
| DIN EN 12591:2009-08 | Identical |
| BS 6349-1-4:2013 | Maritime works General. Code of practice for materials |
| 12/30250711 DC : 0 | BS 6349-1-4 - MARITIME WORKS - PART 1-4: CODE OF PRACTICE FOR PLANNING, DESIGN, CONSTRUCTION AND MAINTE NANCE OF STRUCTURES SET IN THE MARITIME ENVIRONMENT - MATERIALS |
| BS 3690-1(1989) : 1989 | BITUMENS FOR BUILDING AND CIVIL ENGINEERING - PART 1: SPECIFICATION FOR BITUMENS FOR ROADS AND OTHER PAVED AREAS |
| BS 434-1(2011) : 2011 | BITUMEN ROAD EMULSIONS - PART 1: SPECIFICATION FOR ANIONIC BITUMEN ROAD EMULSIONS |
| 14/30283621 DC : 0 | PD 6691:2015 - GUIDANCE ON THE USE OF BS EN 13108 BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| BS 594-2:2003 | Hot rolled asphalt for roads and other paved areas Specification for transport, laying and compaction of hot rolled asphalt |
| BS 4987-1:2003 | Coated macadam (asphalt concrete) for roads and other paved areas Specification for constituent materials and for mixtures |
| BS 594-1:2003 | Hot rolled asphalt for roads and other paved areas Specification for constituent materials and asphalt mixtures |
| BS 594-1:2002 | Hot rolled asphalt for roads and other paved areas Specification for constituent materials and asphalt mixtures |
| BS 594-1:2005 | Hot rolled asphalt for roads and other paved areas Specification for constituent materials and asphalt mixtures |
| BS 434-2:2006 | Bitumen road emulsions Code of practice for the use of cationic bitumen emulsions on roads and other paved areas |
| BS 8217:2005 | Reinforced bitumen membranes for roofing. Code of practice |
| BS 594-2:2002 | Hot rolled asphalt for roads and other paved areas Specification for transport, laying and compaction of hot rolled asphalt |
| BS 594-1:1992 | Hot rolled asphalt for roads and other paved areas Specification for constituent materials and asphalt mixtures |
| BS 4987-1:2005 | Coated macadam (asphalt concrete) for roads and other paved areas Specification for constituent materials and for mixtures |
| BS 4987-1:2001 | Coated macadam (asphalt concrete) for roads and other paved areas Specification for constituent materials and for mixtures |
| PD 6689:2009 | Surface treatments. Guidance on the use of BS EN 12271 and BS EN 12273 |
| 06/30147757 DC : DRAFT AUG 2006 | BS 434-2 - BITUMEN ROAD EMULSIONS - PART 2: CODE OF PRACTICE FOR THE USE OF CATIONIC BITUMEN EMULSIONS ON ROADS AND OTHER PAVED AREAS |
| 10/30212815 DC : 0 | BS 434-1 - BITUMEN ROAD EMULSIONS - PART 1: SPECIFICATION FOR ANIONIC BITUMEN ROAD EMULSIONS |
| PD 6691:2007 | Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications |
| PD 6691:2010 | Guidance on the use of BS EN 13108 Bituminous mixtures. Material specifications |
| BS PD6691(2015) : 2015 | GUIDANCE ON THE USE OF BS EN 13108, BITUMINOUS MIXTURES - MATERIAL SPECIFICATIONS |
| EN 12592:2014 | Bitumen and bituminous binders - Determination of solubility |
| EN 1426:2015 | Bitumen and bituminous binders - Determination of needle penetration |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| EN 12697-12:2008 | Bituminous mixtures - Test methods for hot mix asphalt - Part 12: Determination of the water sensitivity of bituminous specimens |
| EN 12697-1 : 2012 COR 2012 | BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 1: SOLUBLE BINDER CONTENT |
| PREN 15322 : DRAFT 2011 | BITUMEN AND BITUMINOUS BINDERS - FRAMEWORK FOR SPECIFYING CUT-BACK AND FLUXED BITUMINOUS BINDERS |
| EN 13108-5:2016 | Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt |
| EN 12596:2014 | Bitumen and bituminous binders - Determination of dynamic viscosity by vacuum capillary |
| EN 12697-11:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 11: Determination of the affinity between aggregate and bitumen |
| EN 1427:2015 | Bitumen and bituminous binders - Determination of the softening point - Ring and Ball method |
| 89/106/EEC : 1988 | COUNCIL DIRECTIVE OF 21 DECEMBER 1988 ON THE APPROXIMATION OF LAWS, REGULATIONS AND ADMINISTRATIVE PROVISIONS OF THE MEMBER STATES RELATING TO CONSTRUCTION PRODUCTS |
| EN 15326:2007+A1:2009 | Bitumen and bituminous binders - Measurement of density and specific gravity - Capillary-stoppered pyknometer method |
| EN 13808:2013 | Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions |
| EN 12597:2014 | Bitumen and bituminous binders - Terminology |
| EN 12697-26:2012 | Bituminous mixtures - Test methods for hot mix asphalt - Part 26: Stiffness |
| EN 13304:2009 | Bitumen and bituminous binders - Framework for specification of oxidised bitumens |
| EN 13108-1:2016 | Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete |
| EN 12607-2:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 2: TFOT method |
| EN 13108-7:2016 | Bituminous mixtures - Material specifications - Part 7: Porous Asphalt |
| EN 58:2012 | Bitumen and bituminous binders - Sampling bituminous binders |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 13108-3:2016 | Bituminous mixtures - Material specifications - Part 3: Soft Asphalt |
| EN 13305:2009 | Bitumen and bituminous binders - Framework for specification of hard industrial bitumens |
| ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
| EN 12594:2014 | Bitumen and bituminous binders - Preparation of test samples |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN ISO 2719:2016 | Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2016) |
| EN 13108-6:2016 | Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt |
| EN 12607-1:2014 | Bitumen and bituminous binders - Determination of the resistance to hardening under influence of heat and air - Part 1: RTFOT method |
| EN 14023:2010 | Bitumen and bituminous binders - Specification framework for polymer modified bitumens |
| EN 12593:2015 | Bitumen and bituminous binders - Determination of the Fraass breaking point |
| EN ISO 2592:2017 | Petroleum and related products - Determination of flash and fire points - Cleveland open cup method (ISO 2592:2017) |
| EN 13108-2:2016 | Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for Very Thin Layers (BBTM) |
| EN ISO 4259:2006 | Petroleum products - Determination and application of precision data in relation to methods of test (ISO 4259:2006) |
| EN 12595:2014 | Bitumen and bituminous binders - Determination of kinematic viscosity |
| CEN/TR 15352:2006 | Bitumen and bituminous binders - Development of performance-related specifications: status report 2005 |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.